sodcalculator

10 Tech How-To

AirPods Mic Not Working? Try These 8 Fixes

Guide 10-49915 · Updated · Step by step

If your AirPods microphone has stopped picking up your voice during calls or recordings, the fix is often simpler than you think—start by cleaning the mesh and checking your device’s mic settings. This guide walks you through the most common causes and step-by-step solutions, from basic Bluetooth reconnects to resetting your AirPods, so you can get back to clear conversations quickly.

Why Your AirPods Mic Stops Working

AirPods rely on multiple microphones—one on each earbud and, on Pro models, an inward-facing one for noise cancellation. The mic can fail for several reasons:

  • Debris or earwax blocking the tiny mesh openings
  • Software glitches after iOS updates or Bluetooth hiccups
  • Incorrect mic settings on your iPhone, iPad, or Mac
  • Low battery causing power issues
  • Hardware damage from drops or moisture

Most issues are not permanent and can be resolved with the troubleshooting steps below.

Quick Fixes to Try First

Start with these simple checks—they resolve a surprising number of mic problems:

  1. Clean the mesh on both earbuds using a dry, soft-bristled brush (like a clean toothbrush). Do not use water or sharp objects.
  2. Disconnect and reconnect Bluetooth: On your iPhone, go to Settings > Bluetooth, tap the “i” next to your AirPods, then tap “Forget This Device.” Re-pair by placing them in the case and holding the setup button.
  3. Check the microphone setting: On iPhone/iPad, go to Settings > Bluetooth > tap “i” > Microphone. Make sure it’s set to “Automatic” or a specific earbud.
  4. Turn off noise cancellation (if you have AirPods Pro) to see if the inward mic is the issue.
  5. Update your device to the latest iOS, iPadOS, or macOS version.

If these don’t work, move on to a full reset.

How to Reset Your AirPods

A reset clears paired-device memory and often fixes persistent mic issues. Here’s how:

  1. Place both AirPods in the charging case and close the lid.
  2. Wait 30 seconds, then open the lid.
  3. On your iPhone, go to Settings > Bluetooth and tap “Forget This Device.”
  4. With the lid open, press and hold the setup button on the back of the case for about 15 seconds until the status light flashes amber, then white.
  5. Re-pair your AirPods by holding them near your iPhone and following the on-screen prompt.

After resetting, test the mic with a voice memo or a call. If it still fails, the problem may be hardware-related.

Check Your Device’s Microphone Settings

Sometimes the issue isn’t the AirPods—it’s your device’s settings. On an iPhone or iPad:

  • Go to Settings > Privacy > Microphone and ensure the apps you use (Phone, Voice Memos, Zoom) have permission.
  • On a Mac, go to System Settings > Privacy & Security > Microphone and check the same.
  • In a call, make sure you’re not accidentally muted (look for a mute icon on the screen).

If you’re using AirPods with an Android device, check the Bluetooth settings for “Call audio” and make sure it’s enabled.

When It’s a Hardware Problem

If cleaning, resetting, and settings checks fail, the mic may be physically damaged. Signs include:

  • Sound is clear but the other party hears nothing
  • Only one earbud’s mic works
  • Water or impact damage is visible

In these cases, you can still use the other earbud’s mic by setting it as the default in Bluetooth settings. For a permanent fix, contact Apple Support or an authorized repair center. AirPods are not user-serviceable—opening them can cause further damage.

AirPods Mic vs. Other Earbuds: A Quick Comparison

Many users wonder if AirPods mics are worse than others. In general, AirPods and AirPods Pro have decent mic quality for calls, but they lack the boom-style mics found on some gaming headsets. For voice recording or podcasting, a dedicated USB microphone will always outperform any earbud. For everyday calls, AirPods are fine—but they are sensitive to wind noise and background sound, which can make you sound distant.

Preventing Future Mic Problems

To avoid recurring issues:

  • Clean the mesh weekly with a dry brush.
  • Avoid exposing AirPods to moisture (sweat can corrode contacts).
  • Store them in the case when not in use.
  • Install iOS updates promptly—Apple often fixes Bluetooth bugs.

If you notice crackling or static, that often points to a Bluetooth interference issue, not the mic itself. Try moving away from Wi-Fi routers or microwaves.

Frequently Asked Questions

Why is my AirPods mic not working on calls but Siri works?

This usually indicates that the call app doesn’t have microphone permission, or the mic is being used by another app. Check your app’s permissions and close background apps that might be using audio.

Can I use only one AirPod’s mic?

Yes. On iPhone, go to Settings > Bluetooth > tap “i” next to your AirPods > Microphone, and select “Always Left” or “Always Right.” This is useful if one mic is broken.

Does resetting AirPods erase my settings?

Yes, it clears paired devices and custom settings like noise control and ear tip fit. You’ll need to re-pair them to your devices.

Why does my AirPods mic sound muffled?

Muffled audio is almost always caused by debris or earwax blocking the mesh. Clean gently with a dry brush. If that doesn’t help, try a different ear tip (on Pro models) to improve fit.

Will Apple replace AirPods with a broken mic for free?

If the AirPods are under Apple’s one-year limited warranty and the damage isn’t accidental, yes. For accidental damage, you’ll pay a service fee unless you have AppleCare+.

Can I use AirPods mic with a Windows PC?

Yes, but you must enable “Hands-Free Telephony” in Windows sound settings. After pairing, go to Sound settings and select “Headset” as the input device. Note that audio quality may drop when using the mic.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →