sodcalculator

10 Tech How-To

AirPods on Samsung Galaxy: Setup, Sound & Feature Limits

Guide 10-43001 · Updated · Step by step

You can use AirPods with a Samsung Galaxy phone, but you lose several Apple-exclusive features like seamless switching, live listen, and custom fit test. This guide explains exactly how to pair them, what audio quality to expect, and which features stop working on Android.

How to Pair AirPods with a Samsung Galaxy

Pairing AirPods to a Galaxy phone is the same as pairing any Bluetooth earbuds, because AirPods use standard Bluetooth when not connected to an Apple device. Here are the steps:

  1. Put both AirPods in the charging case and keep the lid open.
  2. Press and hold the setup button on the back of the case until the LED flashes white.
  3. On your Galaxy phone, go to Settings → Connections → Bluetooth.
  4. Make sure Bluetooth is on, then tap “Scan” or wait for the device to appear under “Available devices.”
  5. Tap the AirPods entry (usually listed as “AirPods” or “AirPods Pro”) to connect.

If the AirPods don’t appear, make sure they are charged and not already connected to another device. Once paired, they will automatically reconnect when you put them in your ears, just like any other Bluetooth earbuds.

Sound Quality and Audio Codecs

AirPods use the AAC codec, which is supported by both Apple and Android devices. On a Galaxy phone, you will get AAC audio, which is generally good for music and podcasts. However, Samsung phones also support Samsung’s own Scalable Codec and Qualcomm’s aptX, but AirPods do not use those. So you’re limited to AAC, which is fine but not lossless.

If you’re an audiophile, you might notice that AirPods sound slightly less detailed on Android than on iPhone because iOS uses a special AAC encoder optimized for Apple hardware. But for most listeners, the difference is subtle. The microphone quality for calls is also acceptable, but you may notice slightly more background noise compared to using them with an iPhone.

Which AirPods Features Work on Samsung Galaxy?

Some features work fine on Android, while others are completely unavailable. Here’s a breakdown:

  • Works: Play/pause, skip tracks, answer/end calls, volume control (on AirPods Pro and Max), and automatic ear detection (pause when you remove one earbud).
  • Works with apps: You can check battery level using third-party apps like “MaterialPods” or “AirBattery” from the Play Store, but not natively in the Quick Settings panel.
  • Does not work: Siri, live listen, audio sharing, seamless switching between Apple devices, customizing controls, and the ear tip fit test (on AirPods Pro).

Also, the “Hey Siri” voice assistant is replaced by Google Assistant or Bixby, but you can’t trigger them with your voice through the AirPods. You can still use the squeeze or tap gestures to play/pause, but you can’t customize what they do.

How to Check AirPods Battery on Samsung Galaxy

Since Android doesn’t show battery info for Bluetooth devices by default, you’ll need a third-party app. Here’s how to do it:

  1. Install a free app like “MaterialPods” or “AirBattery” from the Google Play Store.
  2. Open the app and allow Bluetooth and location permissions.
  3. With your AirPods connected, open the app to see the battery percentage for each earbud and the case.

These apps work by reading the Bluetooth battery service that AirPods expose. They are generally reliable, but they may not update in real time—you might need to put the AirPods in the case and open the lid to refresh the readings.

Common Problems and Fixes

Some users report issues when using AirPods with Samsung phones. Here are the most common ones and how to fix them:

  • Audio cuts out or stutters: This is often due to Bluetooth interference. Try moving closer to your phone, or unpair and re-pair the AirPods. Also, make sure no other Bluetooth devices are connected simultaneously.
  • AirPods don’t reconnect automatically: Go to Bluetooth settings, tap the gear icon next to your AirPods, and enable “Media audio” and “Call audio.” If that doesn’t help, forget the device and pair again.
  • Volume is too low or too high: Some Android phones have a separate media volume and call volume. Adjust both while playing something. Also, check if “Absolute volume” is enabled in developer options—if not, enable it.
  • Microphone doesn’t work during calls: Make sure the AirPods are set as the active audio device for calls. In Bluetooth settings, tap the gear icon and check that “Call audio” is toggled on.

If problems persist, reset your AirPods by holding the setup button for 15 seconds until the LED flashes amber, then white again. Then pair them again.

AirPods vs. Samsung Galaxy Buds on a Galaxy Phone

If you’re choosing between AirPods and Samsung Galaxy Buds for use with a Galaxy phone, consider these differences:

  • Integration: Galaxy Buds have native support in Samsung’s Bluetooth settings, showing battery levels and allowing firmware updates. AirPods require third-party apps for battery and offer no firmware updates.
  • Latency: Galaxy Buds use the Samsung Scalable Codec, which has lower latency than AAC, making them better for gaming or watching videos.
  • Features: Galaxy Buds support touch controls customization, ambient sound control, and seamless switching between Samsung devices. AirPods lose most of these on Android.
  • Sound: Both sound good, but AirPods tend to have a more neutral sound, while Galaxy Buds often have a bit more bass. Your preference will depend on the music you listen to.

If you already own AirPods, they’ll work fine for basic listening and calls. But if you’re buying new earbuds specifically for a Galaxy phone, Galaxy Buds are generally a better choice due to tighter integration.

Frequently Asked Questions

Can I use AirPods with a Samsung Galaxy for phone calls?

Yes, you can use AirPods for phone calls on a Galaxy phone. The microphone works, and you can answer/end calls by squeezing the stem (on AirPods Pro) or tapping (on older AirPods). The call quality is decent, but it may not be as clear as using a Samsung-branded earbud.

Do AirPods work with Samsung Galaxy for gaming?

They work, but there is noticeable audio latency (delay) because AAC codec has higher latency than Samsung’s Scalable Codec. For casual games, it’s fine, but for competitive gaming, you might notice a delay between what you see and what you hear.

Can I update AirPods firmware on a Samsung Galaxy?

No, firmware updates for AirPods are only delivered through Apple devices. When connected to a Galaxy phone, your AirPods will keep their current firmware version, and you won’t get any future improvements or bug fixes.

Why do my AirPods sound quieter on my Samsung than on my iPhone?

This is often due to Android’s volume leveling. Some Android phones have a “Media volume limit” or “Absolute volume” setting that can affect output. Check your phone’s developer options and ensure “Absolute volume” is enabled. Also, make sure the volume on both the phone and the AirPods (via the volume slider in Bluetooth settings) is maxed out.

Can I use only one AirPod with my Samsung Galaxy?

Yes, you can use a single AirPod just like you would with an iPhone. The microphone will work, and the ear detection will pause audio when you take it out. The other AirPod can stay in the case.

Are AirPods waterproof enough for workouts with a Galaxy phone?

AirPods Pro and AirPods (3rd generation) have an IPX4 rating, meaning they resist sweat and light rain. They are not fully waterproof, so you shouldn’t submerge them. For intense workouts, you might prefer sports earbuds with a higher rating, but AirPods will handle typical gym sessions.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →