sodcalculator

10 Tech How-To

AirPods Pro Noise Canceling Not Working? Fix Guide

Guide 10-47474 · Updated · Step by step

If your AirPods Pro noise canceling isn’t working, the fix usually involves re-seating the ear tips, cleaning the microphones, or re-pairing the AirPods with your device. This guide walks through the most common causes and step-by-step solutions to restore Active Noise Cancellation (ANC) quickly.

How AirPods Pro Noise Canceling Works

Active Noise Cancellation on AirPods Pro uses outward-facing and inward-facing microphones to detect external and internal sound. The processor then generates anti-noise waves that cancel out the unwanted sound before you hear it. Because the system relies on microphones and a tight seal in your ear canal, anything that blocks the mics or breaks the seal will degrade or completely disable ANC.

Quick Checks Before Troubleshooting

  • Make sure your AirPods Pro are charged and connected to your iPhone, iPad, or Mac.
  • Check that Noise Cancellation is selected in Control Center (press and hold the volume slider, then tap the noise control icon).
  • Confirm your device’s Bluetooth is on and the AirPods are not connected to another device that might override settings.
  • Update your device to the latest iOS/iPadOS/macOS version—Apple often fixes ANC bugs via software updates.

Fix 1: Clean the Microphones and Speaker Meshes

Dirt, earwax, and debris are the most common reasons ANC stops working. The microphones are tiny mesh-covered ports on the stem and inside the ear tip. Use a dry, soft-bristled brush (like a clean toothbrush) to gently brush away any debris. Do not use water or sharp objects—you can push dirt further in or damage the mesh. Also clean the speaker mesh at the top of the ear tip where sound comes out. After cleaning, test ANC again.

Fix 2: Adjust or Replace Ear Tips for a Better Seal

ANC can’t work if sound leaks in. The ear tips must create a snug seal. Try the “Ear Tip Fit Test” on your iPhone: go to Settings > Bluetooth > tap the “i” next to your AirPods Pro > Ear Tip Fit Test. If the test says “Adjust” or “Try a Different Size,” switch to a different tip size. Apple includes four sizes (XS, S, M, L). Even if the test passes, try gently twisting the AirPods to seat them deeper. A poor seal is a frequent cause of ANC seeming “weak.”

Fix 3: Reset and Re-pair Your AirPods Pro

Software glitches can cause ANC to fail. To reset: put both AirPods in the case, close the lid, wait 30 seconds, then open the lid. On your iPhone, go to Settings > Bluetooth > tap the “i” next to your AirPods > Forget This Device. Then, with the lid open, press and hold the button on the back of the case until the status light flashes amber, then white. Re-pair by holding the case near your iPhone and following the on-screen steps. This clears most temporary bugs.

Fix 4: Check for Hardware Damage or Wear

If cleaning and resetting don’t help, inspect the ear tips for tears or cracks. Also check the mesh covers for any visible damage. If the AirPods have been dropped or exposed to moisture, the internal microphones may be damaged. In that case, you may need to contact Apple Support or visit an Apple Store for service. Note that ANC is not covered by standard wear-and-tear, but it is covered under Apple’s one-year limited warranty if it’s a manufacturing defect.

Common Misconceptions About ANC

  • “ANC blocks all sound.” No—it reduces constant low-frequency noise (like engine hum) but does not eliminate sudden sounds or high-pitched voices.
  • “Transparency mode is broken.” If you hear your own voice loudly, that’s normal—it’s designed to let sound in.
  • “Turning up volume helps ANC.” It doesn’t; ANC is a separate system. If you rely on volume to mask noise, the ANC may be off or the seal is bad.

When to Seek Professional Help

If you’ve tried all the above and ANC still doesn’t work, there may be a hardware failure. Apple offers a diagnostic test at their stores or via mail-in service. If your AirPods are under warranty, you can get them replaced for free. If not, the cost to replace a single AirPod is around $89 (as of 2025), but that varies by region and model. It’s often cheaper than buying a new pair.

Frequently Asked Questions

Why did my AirPods Pro noise canceling suddenly stop working?

The most common cause is a clogged microphone or a broken ear tip seal. Software glitches after an update can also cause it. Try cleaning and resetting first.

Can I use noise canceling with only one AirPod?

Yes, but the ANC will only work in the ear that has the AirPod. When you remove one AirPod, the other automatically switches to Transparency mode on some devices. You can re-enable ANC on the remaining AirPod by tapping and holding the force sensor.

Does the Ear Tip Fit Test really matter?

Yes. If the fit test fails, the ANC will be less effective because sound leaks in. A proper seal is essential for the anti-noise waves to work.

Will updating my iPhone fix ANC issues?

Often, yes. Apple periodically releases firmware updates for AirPods Pro that fix bugs, including ANC performance. Make sure your iPhone is updated and your AirPods are connected to it while charging to receive updates.

Is it safe to use AirPods Pro with ANC for hours?

ANC itself is safe; it’s just audio processing. However, listening at high volumes for long periods can damage your hearing. Use the volume limit feature in Settings > Sounds & Haptics > Headphone Safety.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →