To set up the Astro A50 on a PC, you connect the A50 Base Station to your computer via USB, then pair the headset by placing it in the dock. The base station handles both audio and chat through a single USB connection, so no optical cable is needed for most modern PCs. This guide walks through the full setup, the required software, and common troubleshooting steps.
What You Need Before Starting
The Astro A50 (Gen 3 and Gen 4) comes with the headset, a base station, a micro-USB cable (Gen 3) or USB-C cable (Gen 4), and an optical cable. For PC use, you only need the USB cable. The base station acts as a wireless transmitter and charging dock, and it also functions as the audio interface. Make sure your PC has a free USB port and, ideally, an internet connection to download the Astro Command Center software.
Step-by-Step Wired Connection to PC
- Place the A50 headset onto the base station so the charging contacts align. The headset should click into place and the LED on the ear cup should turn solid white when charging.
- Connect the included USB cable from the base station to a USB port on your PC. Use a port directly on the motherboard (rear panel) rather than a front-panel hub for a stable connection.
- Power on the base station by flipping the switch on its back (if it has one). The base station will show a power LED.
- Windows should automatically detect the device and install generic drivers. You may see a notification that the device is ready to use.
- Lift the headset off the dock. It should automatically power on and connect wirelessly to the base station. You will hear a power-on tone.
- Set the base station’s switch to “PC” mode (if present) or ensure the input is set to USB on the dock’s display.
If you are using a Gen 3 A50, you might also need to connect the optical cable from the base station to your PC’s optical output (if your motherboard has one) for Dolby surround sound. However, most modern PCs can output Dolby Digital through USB, so this is optional.
Installing Astro Command Center
The Astro Command Center is the software that manages the headset’s firmware, equalizer settings, and microphone levels. It is available for Windows and macOS from the official Astro Gaming website. After downloading and installing, launch the program. Connect your A50 base station via USB, and the software should recognize the headset. From there you can:
- Update the firmware to the latest version (important for fixing bugs and improving battery life).
- Adjust the equalizer presets or create custom ones.
- Set the microphone sidetone (the volume of your own voice you hear in the headset).
- Change the master volume and chat/game audio balance.
If the software does not detect the headset, try a different USB cable (some cables are charge-only) and ensure the base station is powered on.
Setting the Default Playback and Recording Devices
Once connected, Windows needs to know to use the A50 as its audio output and input device. Right-click the speaker icon in the system tray and select “Sounds.” Under the “Playback” tab, look for “Astro A50 Game” or “Astro A50 Voice.” Set the “Game” device as the default for system sounds and games. Under the “Recording” tab, set “Astro A50 Voice” as the default microphone. The A50 presents two audio streams: one for game audio and one for chat. In games, you can choose the game stream for in-game sound and the voice stream for Discord or other chat apps.
Wireless Range and Battery Life
The A50 uses a 2.4GHz or 5GHz wireless connection to the base station, providing a range of about 30 feet (9 meters) in open space. Walls and interference can reduce this. Battery life is rated at around 15 hours per charge, but this varies with volume and sidetone settings. The headset charges only when docked on the base station, and a full charge takes about 3 hours. You can use the headset while it is charging, but it will not be wireless during that time.
Common Problems and Fixes
No Sound or Headset Not Detected
- Ensure the base station is powered on and the USB cable is fully seated.
- Try a different USB port, preferably a USB 2.0 or 3.0 port directly on the motherboard.
- Check that the headset is properly docked and the charging contacts are clean.
- In Windows Sound settings, make sure the A50 is not disabled or set to a different sample rate (try 48000 Hz).
Microphone Not Working
- Check that the microphone boom is flipped down (it mutes when flipped up).
- In the Astro Command Center, ensure the mic is not muted and the sidetone is audible.
- In Windows, set the A50 Voice as the default recording device and adjust the levels.
Headset Keeps Disconnecting
- Move the base station away from other wireless devices (routers, phones) and metal objects.
- Update the firmware via the Command Center.
- Re-pair the headset: place it on the dock, hold the Dolby button and the Game button on the headset simultaneously for 10 seconds until the LED flashes, then remove it.
Frequently Asked Questions
Does the Astro A50 work with PC without the optical cable?
Yes, for most PCs, the USB connection alone provides both audio and chat. The optical cable is only needed for older consoles or to get Dolby Digital from a source that does not output it over USB. On PC, you can enable Dolby in the Astro Command Center.
Why does my A50 sound quiet on PC?
Check the volume wheel on the right ear cup and the master volume in the Command Center. Also, in Windows, right-click the speaker icon, go to “Open Volume Mixer,” and ensure the A50 is not set to a low level. Some games have their own volume settings that might be low.
Can I use the A50 wirelessly while charging?
No, the headset must be docked to charge, and when docked it is not in wireless mode. You can use it as a wired headset with the included cable, but the wireless function is disabled while charging.
How do I reset my Astro A50 headset?
To perform a hard reset, place the headset on the base station, then hold the Dolby button and the Game button on the headset for 15 seconds. The headset will power off and back on. This clears most pairing and firmware glitches.
Is the Astro A50 compatible with Xbox and PC at the same time?
The base station has a switch for Xbox and PC modes. You can connect both a PC (via USB) and an Xbox (via optical or USB) simultaneously, and use the switch to toggle between them. However, you cannot use both at the same time; you must switch the base station’s mode.
Alternatives and Considerations
If you are on a budget or prefer a different fit, consider the Astro A40 (wired) or other wireless headsets like the SteelSeries Arctis Pro or Logitech G Pro X. The A50 is a premium product with a high price, so ensure you need the wireless convenience and the base station’s charging dock. For PC-only users, a wired headset often provides lower latency and no battery concerns, but the A50’s wireless freedom is a strong selling point for many.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone