The top pick for getting more out of your AirPods is mastering the hidden controls and settings that Apple doesn’t advertise on the box. With a few taps in the Settings app and some finger gestures, you can change volume, switch noise modes, and even locate a lost earbud in seconds. This guide covers the most practical tips that work across AirPods 2, 3, Pro, and Max, so you can stop fumbling and start using them like a pro.
What to Look For
Before diving into tricks, it helps to know what actually matters when using AirPods day-to-day. The criteria below are the ones that affect real usage, not marketing specs:
- Firmware version: Apple regularly updates AirPods software, and some tips only work on the latest version. Check by going to Settings > Bluetooth > tap the “i” next to your AirPods.
- Model-specific features: Volume control via stem swipes only works on AirPods Pro (1st and 2nd gen) and AirPods 3. The original AirPods and AirPods 2 lack this, so know what your model supports.
- Battery health: Tips that reduce battery drain, like disabling “Hey Siri” or optimizing charging, matter more if your AirPods are older.
- Comfort and fit: Ear tip fit test (on Pro models) can improve noise cancellation and sound quality significantly. A poor seal makes every other tip less effective.
- Ease of access: The best tips are ones you can do without opening an app. Gesture shortcuts and Control Center toggles save the most time.
1. Change Volume with a Swipe (AirPods Pro and AirPods 3)
Strengths: This is the single most useful trick for Pro and 3rd-gen users. Instead of reaching for your phone or asking Siri, you can slide your thumb up or down on the flat stem of either earbud. A tiny click sound confirms each step, and the volume changes in small increments that feel natural.
Trade-offs: It only works on the stem, not the touch-sensitive area on the head of the AirPods Max. Also, if you have the original AirPods or AirPods 2, this gesture simply doesn’t exist—you’ll need to use the volume buttons on your connected device.
Who it suits: Anyone with AirPods Pro (any generation) or AirPods 3 who listens while walking, commuting, or working out, where pulling out a phone is inconvenient.
2. Customize the Force Sensor Controls
Strengths: You can remap what a squeeze or press does. Go to Settings > Bluetooth > tap “i” next to your AirPods, then choose “Left” and “Right” under “Press and Hold.” You can set one side to toggle Noise Control (between Active Noise Cancellation, Transparency, and Off) and the other to trigger Siri. This gives you two different quick actions without needing to remember complex patterns.
Trade-offs: You have to decide which function you use more. If you set both to the same thing, you lose the ability to have separate controls. Also, the force sensor requires a firm squeeze—light taps won’t register, which can be annoying for new users.
Who it suits: People who frequently switch between noise modes or use Siri often. It’s especially helpful for those who find the default (both sides toggle noise control) redundant.
3. Use “Announce Notifications” to Read Texts Aloud
Strengths: This feature lets Siri read incoming messages and notifications aloud when you’re wearing AirPods. Enable it in Settings > Notifications > Announce Notifications. You can even reply hands-free by saying “Reply” after Siri reads a message, then dictate your response. It works with most messaging apps, not just iMessage.
Trade-offs: It can be intrusive if you get a lot of notifications—every ping gets read out loud. You can limit it to only time-sensitive notifications or specific apps, but that requires extra setup. Also, Siri’s voice can be slow if you’re in a hurry.
Who it suits: Commuters, runners, or anyone who wants to keep their phone in their pocket while staying connected. It’s a killer feature for hands-free multitasking.
4. Find Lost AirPods with the Find My App
Strengths: If you misplace an AirPod, open the Find My app and select your AirPods. You can see their last known location on a map, play a sound on each earbud (or the case), and even get directions. For AirPods Pro 2, the case itself has a speaker that plays a sound, and the U1 chip enables Precision Finding—an arrow that points you to the exact spot on your iPhone screen.
Trade-offs: The sound is not very loud, especially if the AirPod is under a pillow or in a jacket pocket. Precision Finding only works with iPhone 11 or later, and only with AirPods Pro 2. For older models, you’re limited to a map location that may be inaccurate if the AirPods are out of Bluetooth range.
Who it suits: Anyone who has ever lost an AirPod (which is most people). It’s a lifesaver for those who drop them in the couch or between car seats.
5. Optimize Battery Charging to Extend Lifespan
Strengths: AirPods have a built-in “Optimized Battery Charging” feature that learns your routine and waits to charge past 80% until it predicts you’ll need them. This reduces battery aging. You can turn it on in Settings > Bluetooth > tap “i” > toggle “Optimized Battery Charging.” Also, using the MagSafe charging case with a MagSafe charger can make topping up faster and more convenient.
Trade-offs: If your usage is irregular, the optimization might not kick in, and you’ll see the battery stay at 80% longer than you’d like. Also, this doesn’t prevent the battery from degrading over years—it just slows it down.
Who it suits: People who keep their AirPods for more than a year and want to maximize battery life. It’s especially useful for daily commuters who charge at the same time every day.
6. Use Live Listen to Hear Conversations Better
Strengths: This turns your iPhone into a remote microphone that sends audio to your AirPods. It’s designed as a hearing aid feature, but it’s great for hearing someone across a room or in a noisy restaurant. Enable it in Control Center > Hearing > Live Listen, then place the phone near the sound source.
Trade-offs: It drains battery quickly on both the phone and AirPods. Also, it can pick up a lot of background noise, making it worse in very loud environments. It’s not a replacement for a real hearing aid, but it’s a clever workaround.
Who it suits: Students in lectures, parents trying to hear kids in another room, or anyone with mild hearing difficulties. It’s also useful for recording conversations (with permission) by keeping the phone close.
How to Choose
Start with your budget and which AirPods model you own. If you have the original AirPods or AirPods 2, you’re missing out on volume swipes and force sensors, so focus on tips like Find My, Announce Notifications, and battery optimization. If you have AirPods Pro or AirPods 3, you can unlock the full gesture set. For AirPods Max, you have the digital crown for volume and noise control, so the stem tricks don’t apply, but you can still customize controls in Settings.
Consider your primary use case. If you’re a runner, prioritize the volume swipe and Announce Notifications to avoid touching your phone. If you’re in meetings all day, customize the force sensor to quickly mute/unmute (though note that AirPods don’t have a dedicated mute button—you’ll need to tap the mic icon in apps). If you frequently lose things, make sure Find My is set up and test the sound.
Common trade-offs: Customizing press-and-hold means you lose one default function (like switching noise modes). Enabling Announce Notifications can be annoying if you get too many alerts. Using Live Listen drains battery fast. Weigh these against your daily habits.
Frequently Asked Questions
Can I use AirPods with Android phones?
Yes, but you lose most of these tips. You can pair them as standard Bluetooth earbuds, but there’s no Settings app integration, no custom gestures, no Find My, and no automatic ear detection. You’ll only get basic playback and mic.
How do I check my AirPods battery level?
Open the case near your iPhone (or iPad) and wait for the popup. Or add the Batteries widget to your home screen. On Android, you’ll need a third-party app like MaterialPods.
Why do my AirPods keep disconnecting?
Usually it’s Bluetooth interference, low battery, or a software glitch. Try resetting: forget the device in Settings > Bluetooth, put the AirPods back in the case, hold the button on the back for 15 seconds until the light flashes amber, then re-pair.
Can I use only one AirPod at a time?
Yes, each earbud works independently. Just take one out and the audio will route to it. You can also set up noise control differently for each side if you have Pro models.
How do I reset my AirPods to factory settings?
Put them in the case, close the lid, wait 30 seconds, then open the lid and go to Settings > Bluetooth > tap “i” > Forget This Device. Then hold the button on the back of the case for 15 seconds until the light flashes amber, then white. Re-pair as new.
Are AirPods waterproof?
No, but AirPods Pro (2nd gen) have an IPX4 rating, meaning they’re sweat and splash resistant, not waterproof. Don’t swim with them or submerge them. The charging cases are not water resistant.
Bottom Line
If you only take away one tip, make it the volume swipe on AirPods Pro or AirPods 3—it’s the most impactful quality-of-life improvement. But don’t stop there: customize your force sensor, set up Find My, and enable Announce Notifications to truly get your money’s worth. The best AirPods trick is simply knowing what your specific model can do and configuring it once. After that, these earbuds become far more than just wireless audio—they’re a hands-free assistant in your ears.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Move Data to a New Samsung Galaxy Phone
- Pixel C vs Surface Pro: Key Differences
- iPhone X vs iPhone: Key Differences Explained
- Chromebook Won’t Charge: How to Fix
- How to Delete Photos on Google Drive
- Firefox Bookmark Management Tips & Tricks