For the best balance of high FPS and low input lag in Modern Warfare 4 (the 2023 reboot), the top pick is a mix of Low-to-Medium quality presets with DLSS/FSR set to Quality, Render Resolution at 100%, and NVIDIA Reflex Low Latency enabled. This combination cuts GPU load, keeps the image sharp enough to spot enemies, and minimizes the delay between your click and the shot.
What to Look For
Not all settings affect performance equally. Prioritize these:
- Render Resolution (or Upscaling): This is the single biggest FPS lever. Lowering it to 75-85% or using DLSS/FSR Quality can double your frame rate.
- Anti-Aliasing (AA): SMAA T2X is light; MSAA is heavy. DLSS/FSR replaces AA entirely.
- Shadows and Lighting: These are the most GPU-intensive. Drop Shadow Quality and Spot Shadow Quality to Low or Medium.
- Volumetric Quality: This affects smoke and fog. Set to Low to avoid FPS drops in gunfights.
- Particle Quality and Tessellation: Minor visual impact, major performance cost. Keep these Low.
- NVIDIA Reflex / Anti-Lag: Reduces input lag. Always enable if your GPU supports it.
- VRAM Usage Target: Keep it under 90% to avoid stutters from texture swapping.
Option 1: The Competitive Preset (Best Overall)
Settings: Render Resolution 100% with DLSS/FSR Quality, Texture Resolution High, Texture Filtering Anisotropic High, Shadow Quality Low, Spot Shadows Low, Volumetric Quality Low, Particle Quality Low, Tessellation Off, NVIDIA Reflex On + Boost.
Strengths: This gives you the best visual clarity for spotting enemies at range while keeping FPS high. DLSS/FSR Quality mode looks nearly native but runs 30-40% faster.
Trade-offs: Shadows and smoke look flat, and distant objects may pop in slightly.
Best for: Most players with mid-range to high-end GPUs (RTX 2060 and above, or RX 5600 XT and above) who want a clear image without sacrificing performance.
Option 2: The Max FPS Preset (For 144Hz+ Monitors)
Settings: Render Resolution 75-85% (or DLSS/FSR Performance), everything else set to Low or Off, NVIDIA Reflex On + Boost.
Strengths: This maximizes frame rate and minimizes input lag. It’s the smoothest experience, especially on 144Hz or 240Hz displays.
Trade-offs: The image becomes noticeably softer, and distant enemies may be harder to see. Shadows are almost absent, which can actually help visibility in some dark corners.
Best for: Competitive players with high refresh rate monitors and lower-end GPUs (GTX 1060, RX 580) who prioritize speed over looks.
Option 3: The Balanced Streamer/Content Creator Preset
Settings: Render Resolution 100% native, Texture Resolution High, Shadow Quality Medium, Volumetric Quality Medium, Particle Quality High, Tessellation On, NVIDIA Reflex On (no Boost).
Strengths: The game looks great for viewers and still runs at 60-100 FPS. Good for capturing clips without heavy compression artifacts.
Trade-offs: Higher input lag than the competitive presets, and you need a strong GPU (RTX 3070 or better) to maintain 144 FPS.
Best for: Streamers, YouTubers, or players who value visuals and don’t mind a slight input lag penalty.
Option 4: The Low-Spec Survivor Preset
Settings: Render Resolution 50-70% (no upscaling), Texture Resolution Low, everything else Off or Low, NVIDIA Reflex On (if available).
Strengths: Makes the game playable on older hardware (GTX 900 series, RX 470). It can hit 60 FPS even on a potato.
Trade-offs: The game looks like a PS3 title. Visibility is poor, and you might struggle to see enemies in foliage or dark areas.
Best for: Players with very old GPUs or integrated graphics who just want to play, not win.
Option 5: The Hybrid Quality/Performance Preset (For 1440p/4K)
Settings: Render Resolution 100% with DLSS/FSR Balanced or Performance, Texture Resolution High, Shadow Quality Medium, Volumetric Quality Low, Particle Quality Medium, Tessellation On, NVIDIA Reflex On + Boost.
Strengths: Great for high-resolution monitors where native 1440p/4K is too heavy. DLSS/FSR Performance mode at 4K looks surprisingly good and runs much faster.
Trade-offs: Some shimmering on thin objects, and you need a modern GPU (RTX 2070 Super or RX 6700 XT) to get 144 FPS at 1440p.
Best for: Players with 1440p or 4K monitors and mid-to-high-end GPUs.
How to Choose
Start by identifying your GPU and monitor refresh rate. If you have a 60Hz monitor, any preset that hits 60 FPS is fine; prioritize visuals. If you have a 144Hz or 240Hz monitor, you want to hit that refresh rate consistently. Use the in-game benchmark to test your FPS after each change.
Budget matters: DLSS/FSR are only available on RTX (DLSS) and most modern GPUs (FSR). If you have an older GPU without these, you’ll need to lower Render Resolution manually. Also, note that NVIDIA Reflex only works on NVIDIA GPUs; AMD users have Anti-Lag (which is also good).
Common trade-off: Lowering Render Resolution gives the biggest FPS boost but makes the image blurry. Using DLSS/FSR Quality gives a good middle ground. If you’re a competitive player, accept lower visuals for higher FPS. If you’re a casual player, you can afford prettier settings.
Frequently Asked Questions
Should I turn on NVIDIA Reflex?
Yes, always. It reduces input lag by up to 50% with minimal FPS cost. Use “On + Boost” if you have spare GPU headroom.
Is DLSS or FSR better?
DLSS generally looks slightly better and runs faster on NVIDIA GPUs. FSR 2.0/3.0 is very close and works on both AMD and NVIDIA. Both are better than lowering resolution manually.
Does VSync increase input lag?
Yes, VSync adds significant input lag. Turn it off unless you have screen tearing. Use G-Sync/FreeSync instead if your monitor supports it.
What is the best Render Resolution for competitive play?
100% is ideal for clarity, but 85% is a good compromise. Below 75% makes enemies hard to see. Use DLSS/FSR Quality instead of going below 100% native if possible.
Why do my FPS drop in gunfights?
Usually Volumetric Quality and Particle Quality. Set both to Low to prevent smoke and explosion effects from tanking your FPS.
Should I set Texture Resolution to Low?
No, texture resolution has little impact on FPS unless you run out of VRAM. Keep it High if you have 4GB+ VRAM, but lower it if you see stutters.
Bottom Line
For the best balance of high FPS and low input lag, use the Competitive Preset: Render Resolution 100% with DLSS/FSR Quality, shadows and volumetric effects on Low, and NVIDIA Reflex enabled. This gives you a clear, responsive experience on most modern GPUs. If you’re on a 144Hz+ monitor and have a lower-end GPU, drop to the Max FPS Preset. If you’re on a 60Hz monitor or stream, the Balanced Preset is fine. Test each preset in the game’s benchmark and tweak from there.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Turn Off Shutter Sound on iPhone
- VPN Setup on iPhone SE: Step-by-Step Guide
- Fix Internet Not Working on Windows 11
- Fix Right Click Not Working in Firefox
- Compare Two Columns with Comma Separated Values in Excel
- How to Limit Ad Tracking on iPhone Apps