sodcalculator

10 Tech How-To

Fix Fingerprint Scanner Not Working on Android

Guide 10-47418 · Updated · Step by step

If your Android phone’s fingerprint scanner has stopped responding, the fix is usually a combination of cleaning the sensor, re-registering your prints, and checking system settings. Here’s the top pick: start by cleaning the sensor and your fingers with a dry microfiber cloth, then delete all saved fingerprints and re-add them. This resolves the majority of cases because dirt, moisture, or a changed fingerprint (even from a small cut or dry skin) breaks the stored scan.

What to Look For

Before diving into fixes, understand the common causes and what to check first. The most important criteria are: sensor cleanliness (dirt and oil block the optical or ultrasonic reader), finger condition (dry, wet, or calloused skin), software glitches (a recent update or app conflict), screen protector compatibility (thick or poorly applied protectors interfere with under-display sensors), and hardware failure (physical damage or a loose connection). Always start with the simplest, cheapest fixes—cleaning and re-registering—before considering factory resets or repairs.

1. Clean the Sensor and Your Fingers

What to do: Use a soft, dry microfiber cloth to gently wipe the sensor area. For under-display sensors, clean the entire screen. Also wash and dry your hands thoroughly, then try again.

Strengths: This is the fastest and most common fix. It costs nothing and takes seconds. It addresses the #1 cause: grease, dust, or moisture between your finger and the sensor.

Trade-offs: If the sensor is scratched or the screen protector is damaged, cleaning won’t help. Also, if your hands are naturally very dry or sweaty, you may need to re-register prints after cleaning.

Best for: Everyone, as a first step. It’s the least invasive and most likely to work.

2. Delete and Re-register Your Fingerprints

What to do: Go to Settings > Security & privacy > Fingerprint (or Biometrics). Delete all saved fingerprints. Then add a new one, following the on-screen prompts. Rotate your finger slightly as instructed to capture more of the print.

Strengths: This fixes the problem when your fingerprint has changed (due to a cut, scar, or even weight gain/loss) or when the initial scan was poor. It also clears corrupted stored data.

Trade-offs: You’ll need to re-register all fingers you use. If the sensor is failing at a hardware level, this won’t help.

Best for: Users whose scanner worked before but now fails intermittently or after a software update.

3. Check for Screen Protector or Case Interference

What to do: If you have a screen protector, check if it’s properly aligned and free of bubbles. Try removing it temporarily. Also remove any case that might cover the sensor or press against the screen. If the scanner works without them, you need a thinner protector or a case with a proper cutout.

Strengths: Under-display sensors are sensitive to thickness. Removing a thick or poorly applied protector often restores functionality immediately.

Trade-offs: You may need to buy a new protector. Some protectors have a cutout for the sensor, but if yours doesn’t, it’s a common culprit.

Best for: Users who recently installed a new screen protector or case and noticed the scanner stop working.

4. Restart Your Phone and Update Software

What to do: Press and hold the power button, then tap Restart. After reboot, check if the scanner works. Also go to Settings > System > Software update and install any pending updates.

Strengths: A simple reboot clears temporary glitches. Software updates often include fixes for biometric issues. It’s a no-risk step.

Trade-offs: If the problem is hardware, this won’t help. Updates can occasionally introduce new bugs, but they’re rare.

Best for: Users experiencing sudden failure after a system update or app installation.

5. Boot into Safe Mode

What to do: Turn off your phone. Then press and hold the power button until the logo appears, then release and immediately press and hold the volume down button. Keep holding until the home screen appears with “Safe mode” at the bottom. Test the fingerprint scanner. To exit, restart normally.

Strengths: This disables all third-party apps. If the scanner works in safe mode, a downloaded app is interfering. You can then uninstall recently installed apps.

Trade-offs: Safe mode disables many features, so it’s only for testing. It doesn’t fix the problem, just identifies it.

Best for: Users who suspect a specific app (often a battery saver or a launcher) is blocking the sensor.

6. Factory Reset (Last Resort)

What to do: Back up your data first. Then go to Settings > System > Reset options > Erase all data (factory reset). Follow the prompts. After reset, set up the phone and test the scanner before restoring apps.

Strengths: This clears all software issues, including corrupted system files that can’t be fixed otherwise.

Trade-offs: You lose all data unless backed up. It’s time-consuming. If the problem is hardware, the reset won’t help.

Best for: Users who have tried everything else and still have issues, especially after a major update.

How to Choose

Start with the free and easy fixes. If you’re on a tight budget, skip the factory reset and try cleaning and re-registering first—they cost nothing. For most users, the issue is resolved by cleaning and re-adding prints. If you have a screen protector, that’s the next suspect. If you’re a power user with many apps, safe mode is a smart diagnostic step. Only consider a factory reset if you’re comfortable with data loss and have exhausted other options. If none of these work, the sensor is likely damaged, and you’ll need professional repair—check your warranty before paying.

Frequently Asked Questions

Why does my fingerprint scanner work sometimes but not always?

Intermittent issues are usually caused by finger condition (dry, wet, or dirty), a slightly misaligned screen protector, or a software bug. Re-registering your prints and cleaning the sensor often fixes it.

Can a screen protector really block the scanner?

Yes, especially if it’s thick or has air bubbles. Under-display sensors rely on the light passing through the glass. A protector that’s too thick or not fully adhered can scatter the light, preventing a good read.

Will a factory reset fix a hardware issue?

No. A factory reset only clears software problems. If the sensor is physically damaged (e.g., cracked or water-damaged), you’ll need to repair or replace the hardware.

My phone says “Fingerprint hardware not available”—what does that mean?

This error usually indicates a hardware failure or a software crash. Try restarting first. If it persists, it’s likely a hardware issue that requires professional repair.

Is it safe to use a wet finger?

No. Most sensors (especially optical ones) fail with water on the finger. Dry your hands completely before attempting to unlock. If you have sweaty hands, re-register your prints when your hands are dry.

How often should I re-register my fingerprints?

Every few months, or whenever you notice a decline in accuracy. Changes in skin (cuts, calluses, dryness) can make old scans invalid.

Bottom Line

The best approach is to work through the fixes in order: clean, re-register, check accessories, restart, and then safe mode. For most people, the problem is solved by cleaning and re-adding prints. If you have a screen protector, remove it and test. Only after trying all these should you consider a factory reset. If nothing works, the sensor is likely broken, and you should contact your phone’s manufacturer or a certified repair service. Remember to back up your data before any reset.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →