sodcalculator

10 Tech How-To

BIOS Key in Windows 10: How to Find and Use It

Guide 10-58079 · Updated · Step by step

To open the BIOS (or UEFI firmware) on a Windows 10 PC, you either press a specific key during startup (commonly Del, F2, F10, or Esc) or use Windows 10’s built-in “Advanced startup” menu. The exact key depends on your motherboard or laptop manufacturer, and the Windows method works on any brand. This guide explains both ways, what to do inside the BIOS, and how to fix common problems.

What Is the BIOS and Why Would You Need It?

The BIOS (Basic Input/Output System) is firmware stored on a chip on your motherboard. It initializes hardware (CPU, RAM, storage, keyboard) before handing control to Windows. Modern PCs use UEFI (Unified Extensible Firmware Interface), which is the successor to the traditional BIOS, but most people still call it “BIOS.” You might need to enter it to:

  • Change the boot order (e.g., boot from a USB drive to install Windows).
  • Enable or disable hardware features like virtualization (Intel VT-x or AMD-V).
  • Adjust fan curves, overclock settings, or RAM profiles (XMP).
  • Set a firmware password or secure boot options.
  • Update the firmware (flashing the BIOS).

Windows 10 runs on both BIOS and UEFI systems, but most PCs sold since 2012 use UEFI. The steps to enter are the same for both.

Finding the BIOS Key for Your PC

The BIOS key is displayed briefly on the screen during the POST (Power-On Self-Test) – usually at the bottom or top-left with text like “Press DEL to enter setup” or “Press F2 for System Setup.” This splash screen appears for only 1–3 seconds, so watch carefully right after pressing the power button.

If you miss it, check your manufacturer’s support page or manual. Common keys by brand:

  • Dell – F2 (setup), F12 (boot menu)
  • HP – Esc then F10 (setup), F9 (boot menu)
  • Lenovo – F1 or F2 (desktops), F2 or Enter then F1 (ThinkPads)
  • ASUS – Del or F2
  • MSI – Del
  • Gigabyte – Del or F2
  • Acer – F2 or Del
  • Toshiba – F2 (some models use Esc then F1)

If your PC was built by a local shop or is a custom build, the motherboard brand determines the key – check the motherboard model (printed on the board itself) and look up its manual.

How to Enter BIOS Using a Key at Startup

This is the classic method and works on all PCs that haven’t enabled “Fast Boot” (which can skip the key prompt). Here’s the exact procedure:

  1. Shut down your PC completely (not restart – a full shutdown is safer for some systems).
  2. Press the power button, then immediately begin tapping the BIOS key (e.g., F2 or Del) repeatedly – about 2–3 times per second.
  3. Keep tapping until the BIOS/UEFI setup screen appears. If Windows starts to load, you missed the window – restart and try again.
  4. If you’re using a wireless keyboard, it may not work during POST. Use a wired USB keyboard.

Some PCs with “Fast Boot” or “Quick Boot” enabled may not respond to key presses. In that case, use the Windows 10 method below to enter the BIOS once, then disable Fast Boot in the BIOS settings to make future key presses work.

How to Enter BIOS from Windows 10 (No Key Needed)

If you can’t catch the key, Windows 10 provides a reliable software path. This works on any brand and is especially useful for laptops with unusual keys. Steps:

  1. Open Settings (Win + I) → Update & Security → Recovery.
  2. Under “Advanced startup,” click Restart now. Your PC will reboot into a blue menu.
  3. Choose Troubleshoot → Advanced options → UEFI Firmware Settings.
  4. Click Restart. The PC will boot directly into the BIOS/UEFI.

This method is also the only way to enter BIOS if your keyboard isn’t recognized during POST or if you have BitLocker encryption that requires a recovery key before the BIOS screen.

Using the BIOS: Navigation and Common Settings

Once inside, the BIOS interface varies by manufacturer, but the basics are similar. You navigate with the keyboard (arrow keys, Enter, Esc) or mouse on newer UEFI systems. Common sections:

  • Main/System Info – shows CPU, RAM, BIOS version, system time/date.
  • Boot – set boot order, enable/disable boot devices, toggle Secure Boot and CSM (Compatibility Support Module).
  • Advanced – CPU configuration, virtualization, SATA mode (AHCI/RAID), USB settings.
  • Exit – save changes and exit, discard changes, or load optimized defaults.

To change a setting, select it and press Enter, then choose a value. Always use the Exit & Save Changes option (usually F10) to apply. If you’re unsure, select Exit Without Saving to avoid unintended changes.

One common task is changing boot order to install Windows from a USB. In the Boot menu, move your USB drive to the top of the list. After installation, you can change it back.

Common Problems and How to Fix Them

Problem: The BIOS key doesn’t work. Try a different key (the splash screen may list it), use a wired keyboard, or disable Fast Boot in Windows (Settings → System → Power & sleep → Additional power settings → Choose what the power buttons do → Change settings that are currently unavailable → uncheck “Turn on fast startup”). Then restart and try again.

Problem: Windows 10’s “UEFI Firmware Settings” option is missing. This happens if Windows is installed in legacy BIOS mode (not UEFI). You can still enter via the startup key, or you can convert to UEFI using the MBR2GPT tool – but that’s a more advanced procedure. For most users, the startup key is sufficient.

Problem: The screen goes black when you try to enter BIOS. This can happen with certain graphics cards or monitors. Try using a different video port (e.g., motherboard HDMI instead of GPU), or disconnect extra monitors. If it persists, reset the CMOS by removing the small battery on the motherboard for 30 seconds (with the PC unplugged).

Problem: You forgot your BIOS password. On most desktops, resetting the CMOS clears the password. On laptops, it’s often stored in a separate chip and may require a service center – there’s no universal backdoor.

Frequently Asked Questions

Q: What is the BIOS key for Windows 10?
A: There is no single universal key. The most common are Del, F2, F10, and Esc. Check your motherboard or laptop manufacturer’s manual, or watch the splash screen at startup for a prompt like “Press F2 to enter setup.”

Q: Can I enter BIOS without restarting?
A: No, the BIOS runs before Windows loads, so you must restart. However, you can use the Windows 10 “Advanced startup” method to reboot directly into the BIOS without pressing any key.

Q: How do I exit BIOS and save changes?
A: Look for an “Exit” tab or press F10 (common on most systems). A dialog will ask if you want to save changes and exit – select Yes. To exit without saving, choose “Discard Changes and Exit” (usually Esc).

Q: Will changing BIOS settings void my warranty?
A: Generally, no – changing settings is allowed. However, flashing a modified BIOS or overclocking beyond safe limits could cause damage that isn’t covered. Stick to standard settings unless you know what you’re doing.

Q: Why does my PC boot straight to Windows and ignore the BIOS key?
A: This is often due to Fast Boot or Quick Boot enabled in Windows or the BIOS itself. Disable Fast Startup in Windows (as described above) and also disable “Fast Boot” in the BIOS if you can access it once. If you can’t, use the Windows 10 recovery menu to enter BIOS and disable it there.

Q: Is BIOS the same as UEFI?
A: UEFI is the modern replacement for BIOS. It offers faster boot, support for drives larger than 2TB, and a graphical interface. Most Windows 10 PCs use UEFI, but the term “BIOS” is still used colloquially to refer to the firmware setup.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →