sodcalculator

10 Tech How-To

Fire Stick to Soundbar: HDMI, Optical & Bluetooth

Guide 10-58499 · Updated · Step by step

To connect a Fire Stick to a soundbar, you have three main options: HDMI ARC (best for audio quality and simplicity), optical (good if your soundbar lacks HDMI ARC), and Bluetooth (wireless but with potential latency). The method you choose depends on your TV’s ports, your soundbar’s inputs, and whether you prioritize audio fidelity or convenience.

Understanding the Connection Options

Amazon Fire TV Sticks (including the Fire TV Stick 4K and Fire TV Stick 4K Max) output audio through their HDMI port. The soundbar, however, can accept audio via several inputs. The trick is that the Fire Stick and soundbar don’t connect directly in most setups—they connect through your TV. The TV acts as the hub, passing audio from the Fire Stick to the soundbar. Here’s how each method works:

  • HDMI ARC/eARC: Uses an HDMI cable between the TV and soundbar. The TV sends audio back down the same cable that carries video from the soundbar (if the soundbar has an HDMI output) or via a dedicated ARC port. Supports Dolby Atmos and DTS:X if both devices support it.
  • Optical (TOSLINK): Uses a fiber-optic cable for digital audio. Supports Dolby Digital and DTS, but not the newer object-based formats like Dolby Atmos. Limited to 5.1 channels.
  • Bluetooth: Wireless connection between the Fire Stick (or TV) and soundbar. Easiest to set up, but can introduce audio lag and may compress the signal, reducing quality.

Setting Up HDMI ARC (Best Quality)

HDMI ARC (Audio Return Channel) is the most straightforward and highest-quality method for connecting a Fire Stick to a soundbar. It simplifies the setup by using a single HDMI cable for both audio and video, and it allows the TV remote to control the soundbar’s volume.

  1. Connect the Fire Stick to an HDMI input on your TV (not the ARC port, unless you want to use the TV’s built-in apps).
  2. Connect an HDMI cable from the soundbar’s HDMI OUT (ARC) port to the TV’s HDMI ARC port. If your soundbar has multiple HDMI inputs, you can also connect the Fire Stick directly to the soundbar, but then you lose the ability to use TV apps simultaneously.
  3. Turn on both devices. On the TV, enable HDMI ARC in the audio settings. On the soundbar, select the HDMI ARC input.
  4. Test by playing content on the Fire Stick. The sound should come from the soundbar. If not, check the TV’s audio output settings and ensure it’s set to “External Speakers” or “ARC.”

If your TV and soundbar support eARC (enhanced Audio Return Channel), you’ll get higher bandwidth, enabling lossless formats like Dolby TrueHD and DTS-HD Master Audio. Check your device manuals to confirm eARC support.

Using Optical Cable (When HDMI ARC Isn’t Available)

Older TVs or basic soundbars may lack HDMI ARC. In that case, optical (TOSLINK) is a reliable alternative. It carries digital audio without the video signal, so you’ll still need an HDMI cable from the Fire Stick to the TV.

  1. Connect the Fire Stick to any HDMI input on the TV.
  2. Plug one end of an optical cable into the TV’s optical OUT port and the other into the soundbar’s optical IN port.
  3. On the TV, set the audio output to “Optical” or “Digital Audio Out.”
  4. Select the optical input on the soundbar.

Optical supports up to 5.1 channels of Dolby Digital or DTS, which is fine for most TV shows and movies. However, it cannot carry Dolby Atmos or DTS:X, and it doesn’t support CEC (Consumer Electronics Control), so you’ll need to use the soundbar’s remote for volume control.

Bluetooth Connection (Wireless Simplicity)

Bluetooth is the most convenient option because it requires no cables. You can pair the Fire Stick directly to the soundbar, or pair the TV to the soundbar and let the TV pass the audio. The latter is often more stable.

  1. On the soundbar, put it in Bluetooth pairing mode (usually by pressing a dedicated button or selecting Bluetooth input).
  2. On the Fire Stick, go to Settings > Controllers and Bluetooth Devices > Other Bluetooth Devices. Select your soundbar from the list.
  3. Alternatively, on the TV, go to Settings > Sound > Sound Output, and choose Bluetooth. Then pair the soundbar.

Bluetooth is prone to audio lag (lip-sync issues) because of the wireless transmission. Some soundbars and Fire Sticks support aptX Low Latency, but it’s not universal. If you notice delay, look for a “lip-sync” or “audio delay” setting on the TV or soundbar to compensate. Also, Bluetooth compresses the audio stream, so you lose some fidelity compared to wired connections.

Choosing the Right Method for Your Setup

Your choice depends on your equipment and priorities. Here’s a quick guide:

  • If your TV has an HDMI ARC port and your soundbar has HDMI ARC, use that. It’s the best balance of quality and convenience.
  • If your TV lacks HDMI ARC but has an optical output, use optical. It’s a solid wired option.
  • If you want zero cables and don’t care about minor latency, use Bluetooth. It’s fine for casual viewing.
  • If you want the absolute best audio (e.g., for a home theater with Dolby Atmos), use HDMI eARC if available. Otherwise, optical is still good.

Common Problems and Fixes

Even with the right cables, things can go wrong. Here are typical issues and solutions:

  • No sound from the soundbar: Check that the TV’s audio output is set to the correct source (ARC, Optical, or Bluetooth). Ensure the soundbar is on the right input. Try a different HDMI cable if using ARC—some cables don’t support the required bandwidth.
  • Audio lag (lip-sync): This is common with Bluetooth. Look for a “lip-sync” or “A/V sync” setting on the TV or soundbar and adjust it. On the Fire Stick, you can also go to Settings > Display & Sounds > Audio > Audio Delay to fine-tune.
  • No Dolby Atmos: If your soundbar supports Atmos but you’re not getting it, make sure the Fire Stick is connected to an HDMI input that supports Atmos (usually the eARC port), and that the TV’s audio output is set to “Pass-through” or “Bitstream.”
  • Bluetooth keeps disconnecting: Move the soundbar and Fire Stick closer together, or pair the TV instead of the Fire Stick. Interference from other devices can also cause drops.

Comparing Audio Quality

Audio quality differs significantly between the three methods. HDMI ARC/eARC provides the highest fidelity, supporting lossless formats like Dolby TrueHD and DTS-HD Master Audio (with eARC). Optical is limited to lossy Dolby Digital and DTS, but still sounds good for most content. Bluetooth, depending on the codec (SBC, AAC, aptX), can range from decent to very good, but it’s always compressed. For a critical listener, wired is better.

Another factor: HDMI ARC supports CEC, so you can control the soundbar volume with the TV remote. Optical and Bluetooth don’t support CEC, meaning you’ll need the soundbar’s remote (or a universal remote) for volume.

Frequently Asked Questions

Can I connect the Fire Stick directly to the soundbar? Yes, if the soundbar has an HDMI input. You’d plug the Fire Stick into the soundbar, then the soundbar’s HDMI output to the TV. This gives you the best audio quality, but you lose the ability to use TV apps simultaneously, and the TV remote may not control the soundbar volume.

Does the Fire Stick support Bluetooth audio? Yes, the Fire Stick can pair with Bluetooth speakers and soundbars. Go to Settings > Controllers and Bluetooth Devices > Other Bluetooth Devices to pair. However, the TV must still be connected to the Fire Stick via HDMI for video.

Will optical cable support Dolby Atmos? No. Optical cables do not have enough bandwidth for Dolby Atmos or DTS:X. For those formats, you need HDMI ARC/eARC.

Why is there a delay when using Bluetooth? Bluetooth transmission adds latency, typically 100-200ms. This can cause audio to lag behind video. Some devices support low-latency codecs like aptX Low Latency, but both the source and the soundbar must support it. You can adjust the audio delay settings on the TV or soundbar to compensate.

Which is better: optical or Bluetooth? Optical is generally better for audio quality and latency, but it requires a cable. Bluetooth is more convenient but may have lag and compression. If you’re watching movies, optical is preferable; if you’re listening to music and don’t mind a slight delay, Bluetooth is fine.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →