sodcalculator

10 Tech How-To

DBD Error Code? Fixes for Common Dead by Daylight Errors

Guide 10-55833 · Updated · Step by step

Dead by Daylight (DBD) players frequently encounter error codes that block matchmaking, kick them from lobbies, or prevent the game from launching. This article explains the most common DBD error codes—what they mean, why they happen, and the exact steps to fix them—so you can get back to the Trial quickly.

What Are DBD Error Codes?

Dead by Daylight uses error codes to signal specific problems between the game client and its servers. Unlike a generic “connection lost” message, each code points to a particular failure point: network connectivity, server status, game file integrity, or account authentication. The codes you see most often are Error 8012, Error 1005, Error 4, and Error 1. Understanding which category your code falls into saves you from trying the wrong fix.

Common DBD Error Codes and Their Meanings

  • Error 8012 – Matchmaking or lobby connection failure. Often appears when the game can’t establish a stable peer-to-peer or dedicated server connection.
  • Error 1005 – Server connection timeout. The client sent a request but the server didn’t respond in time, usually due to high traffic or network issues.
  • Error 4 – General network error. This can mean a lost connection during a match or a failure to connect to the matchmaking service.
  • Error 1 – Game file or installation issue. Often appears when the game can’t read a required file, leading to crashes or failure to launch.
  • Error 1001 – Authentication failure. The game can’t verify your account or DLC ownership, often after a Steam or console service outage.

Why Do These Errors Happen?

Most DBD errors stem from three root causes: server-side outages, local network problems, or corrupted game files. Server outages are common after major updates or during peak hours—the official Dead by Daylight status page (or the game’s Twitter/X account) will confirm if the servers are down. Local issues include unstable Wi-Fi, strict NAT types, or ISP throttling. File corruption can happen after a patch installs incorrectly or when antivirus software quarantines game files. Less common but possible: outdated game version or platform-specific issues (Steam, Epic, PlayStation, Xbox, Switch).

How to Fix DBD Error Codes (Step-by-Step)

Try these fixes in order. Most players resolve their issue with the first two steps.

  1. Check server status. Visit the official Dead by Daylight status page or the developer’s social media. If servers are down, wait—no local fix will work.
  2. Restart the game and your platform. Fully close DBD, then restart Steam/Epic/console. This clears temporary glitches.
  3. Verify game files. On Steam, right-click Dead by Daylight → Properties → Installed Files → Verify integrity of game files. On Epic, click the three dots on the game tile → Verify. On consoles, use the “Check for Updates” option or reinstall if necessary.
  4. Check your network connection. Use a wired Ethernet connection instead of Wi-Fi. Restart your router. If you’re on Wi-Fi, ensure you have a strong signal.
  5. Adjust firewall/antivirus settings. Make sure Dead by Daylight and its anti-cheat (EAC – Easy Anti-Cheat) are allowed through your firewall. Temporarily disable antivirus to test, then re-enable it.
  6. Change DNS servers. Sometimes your ISP’s DNS is slow. Switch to Google DNS (8.8.8.8 and 8.8.4.4) or Cloudflare (1.1.1.1) in your network settings.
  7. Reset your router or modem. Unplug for 30 seconds, plug back in, wait for it to fully boot, then retry.
  8. Reinstall the game. If nothing else works, uninstall and reinstall Dead by Daylight. This fixes any deep file corruption.

Error 8012 – Matchmaking Failure

This is the most reported DBD error. It usually appears as “Unable to connect to the matchmaking service.” The cause is often a NAT type issue—if your router is set to NAT Type 3 (Strict), you can’t connect to other players. To fix it, enable UPnP (Universal Plug and Play) on your router, or forward the required ports for Dead by Daylight (port 7777, 27015, 30000-30010 for Steam). If you’re on a college or work network, you may not be able to change NAT settings—try using a mobile hotspot to test. Another common trigger is a corrupted cache; clearing your platform’s cache (Steam download cache, console cache) can help.

Error 1005 – Server Timeout

Error 1005 means the game couldn’t reach the server in time. This often happens right after a new chapter releases, when thousands of players try to log in simultaneously. If servers are online, the issue is likely on your end. Check your internet speed (a minimum of 5 Mbps download and 1 Mbps upload is recommended). If you’re using a VPN, try disabling it—VPNs can interfere with the game’s connection. Also, ensure the game is updated to the latest version; an outdated client can cause timeouts.

How to Prevent DBD Errors

  • Keep the game updated. Enable automatic updates on your platform.
  • Use a wired connection. Ethernet is more stable than Wi-Fi.
  • Restart your router regularly. This prevents IP conflicts and memory leaks.
  • Don’t alt-tab during loading. Some players report that alt-tabbing during matchmaking can trigger errors.
  • Close background programs. Bandwidth-heavy apps (streaming, downloads) can cause timeouts.

Frequently Asked Questions

What does DBD error 8012 mean?

Error 8012 means the game couldn’t connect to the matchmaking service. It’s usually a network issue—check your NAT type, restart your router, and verify your firewall allows DBD.

Why do I keep getting error 1005?

Error 1005 is a server timeout. It often happens during peak hours or after updates. Check if the servers are down; if not, try restarting your router and disabling VPN.

Can I fix DBD errors on console?

Yes. On PlayStation or Xbox, restart the console, check for game updates, and clear the console’s cache (power cycle). If that fails, uninstall and reinstall the game.

Does using a VPN cause DBD errors?

Yes, sometimes. VPNs can increase latency or cause connection drops. If you get errors, try disabling your VPN and connecting directly.

How do I verify game files on Epic?

Open Epic Games Launcher, go to your Library, click the three dots on Dead by Daylight, select “Verify,” and wait for the process to finish.

What should I do if none of these fixes work?

If you’ve tried all steps and still get errors, contact Dead by Daylight support through their official website. Include your platform, error code, and what you’ve tried. They can check if your account or region has an issue.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →