Microsoft Lists and Microsoft Planner are both Microsoft 365 tools for organizing work, but they serve different purposes. Lists is a flexible data-tracking app for managing structured information like inventories, issue logs, and asset registers, while Planner is a task-management tool for assigning and tracking work within a team. The table below summarizes the core differences, and the sections that follow explain each tool in depth.
Formula
The calculator computes the volume of material needed to cover a rectangular lawn with a uniform depth. The volume in cubic yards is:
Volume (yd³) = Length (ft) × Width (ft) × Depth (in) ÷ 324
Where:
- L = lawn length in feet
- W = lawn width in feet
- D = depth in inches (converted to feet by dividing by 12, then multiplied by 27 to get cubic yards)
The divisor 324 comes from 27 (cubic feet per cubic yard) multiplied by 12 (inches per foot).
Worked Example
Using the default values: length = 40 ft, width = 25 ft, depth = 3 in.
- Convert depth to feet: 3 in ÷ 12 = 0.25 ft
- Calculate volume in cubic feet: 40 × 25 × 0.25 = 250 ft³
- Convert to cubic yards: 250 ÷ 27 = 9.26 yd³
The calculator rounds to 2 decimal places, giving 9.26 yd³ as the headline result, and also shows 250 ft³.
When to Use This Calculator
Use this calculator when you need to order soil, mulch, gravel, or other bulk materials for a rectangular area. It is also useful for estimating the amount of concrete or sand for a slab or path. The result tells you how many cubic yards to purchase, which is the standard unit for most bulk suppliers.
How to Read the Result
The headline number is the volume in cubic yards, which is what you will typically order. The cubic feet figure is helpful if a supplier quotes in that unit. For example, if you need 9.26 yd³, you might order 10 yd³ to account for compaction and waste, especially for soil or mulch.
Common Mistakes
- Mixing units: Ensure length and width are in feet, and depth is in inches. The formula automatically handles the conversion.
- Rounding too early: Keep full precision during calculation, then round the final result.
- Forgetting waste: Add 5-10% for settling, spillage, or uneven ground. This calculator gives the exact volume, not the order quantity.
Limitations
This formula assumes a perfectly rectangular area with a uniform depth. For irregular shapes, divide the area into rectangles and sum the volumes. It also does not account for compaction, which can reduce volume by up to 20% for some materials. Always check with your supplier for their recommended coverage per cubic yard, as it varies by material.
Frequently Asked Questions
How many cubic feet are in a cubic yard?
There are 27 cubic feet in one cubic yard (3 ft × 3 ft × 3 ft). This is why the formula divides by 27 after converting depth to feet.
What depth of soil do I need for a new lawn?
For most grass seed, a depth of 4-6 inches of topsoil is recommended. For sod, 2-3 inches is often enough if the existing soil is decent. This calculator lets you try different depths to see the volume needed.
Should I round up when ordering?
Yes, it is wise to round up to the next whole cubic yard, and add 5-10% extra for waste and settling. For example, 9.26 yd³ becomes 10 yd³. This ensures you do not run short.
Can I use this for circular areas?
No, this calculator is for rectangles. For circles, use the formula π × r² × depth, where r is the radius. You can calculate that separately and add it to the rectangle volume if needed.
What if my depth is in feet instead of inches?
If your depth is already in feet, multiply length × width × depth (in feet) and then divide by 27 to get cubic yards. The calculator expects inches, so convert feet to inches by multiplying by 12.
Does the type of material affect the volume?
No, volume is the same for any material. However, weight per cubic yard varies greatly: topsoil weighs about 2,000-2,700 lbs, while gravel can be 2,800-3,400 lbs. Check with your supplier for weight limits on delivery trucks.
Related
Formula used
in l | Lawn length | ft | 40 | 0 | 100000 in w | Lawn width | ft | 25 | 0 | 100000 in d | Depth | in | 3 | 0 | 120 out yd | Volume | yd³ | l * w * d / 324 | 2 out ft3 | Volume | ft³ | l * w * d / 12 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More in this bed
- Spotify Jam Not Working on Mobile? Fixes That Work
- Windows 10 No Internet Secured WiFi Error Fix
- Multi-Cloud GPU Failover Design Guide
- Error Code Currant Destiny? Meaning & Fixes
- iPhone vs OnePlus: Key Differences in a Table
- Install Windows After Replacing Hard Drive