The core difference is that socially responsible investing (SRI) actively excludes companies or industries that conflict with your values, while ESG investing uses environmental, social, and governance factors to score and select companies that perform well on those metrics. In short, SRI is about avoiding the “bad,” and ESG is about favoring the “good” — though both aim to align your money with your principles.
Formula
The calculator computes the volume of soil, compost, or other material needed to fill a rectangular area to a specified depth. The formula is:
Volume (cubic feet) = Length (ft) × Width (ft) × Depth (in) ÷ 12
Volume (cubic yards) = Length (ft) × Width (ft) × Depth (in) ÷ 324
Where:
- Length – the longer side of the area in feet (ft).
- Width – the shorter side of the area in feet (ft).
- Depth – how deep you want the material in inches (in). Since 1 ft = 12 in, dividing by 12 converts depth to feet.
The divisor 324 comes from 27 (cubic feet per cubic yard) × 12 (inches per foot).
Worked Example
Using the default values: length = 40 ft, width = 25 ft, depth = 3 in.
- Convert depth to feet: 3 in ÷ 12 = 0.25 ft
- Compute cubic feet: 40 × 25 × 0.25 = 250 ft³
- Compute cubic yards: 250 ÷ 27 = 9.26 yd³ (rounded to 2 decimals)
The calculator shows 9.26 yd³ and 250 ft³, matching the manual calculation.
When to Use This Calculator
Use this tool when you’re planning to buy soil, mulch, gravel, or concrete for a garden bed, lawn leveling, a raised planter, or a small construction project. It tells you how much material to order so you don’t overbuy or run short. For irregular shapes, break the area into rectangles and add the volumes.
Note that bulk suppliers often sell by the cubic yard, while bagged products are sold by cubic foot. Knowing both numbers lets you compare costs accurately.
How to Read the Result
The first number (cubic yards) is the headline answer – it’s what you’ll order from a bulk supplier. The second (cubic feet) is useful for bagged purchases. For example, if each bag holds 1.5 ft³, you’d need 250 ÷ 1.5 ≈ 167 bags, which you’d round up to 168.
If you’re filling a planter or a hole, measure the inside dimensions, not the outside. For a tapered hole (wider at top), use the average width and length.
Common Mistakes
- Mixing units: Entering depth in feet instead of inches, or length in yards, throws off the result by a factor of 3 or 12.
- Forgetting to convert: Always divide depth by 12 before multiplying.
- Rounding too early: If you round 9.26 yd³ to 9 yd³, you’ll be short by about 0.26 yd³ – enough to matter for a large area.
- Ignoring compaction: Some materials (like topsoil) settle after spreading. Ordering 10-15% extra is common for such projects.
Limits of the Formula
This formula assumes a perfectly rectangular prism with uniform depth. It doesn’t account for slopes, irregular edges, or material settling. For a triangle, multiply the base × height × depth ÷ 2 (in feet) to get cubic feet, then divide by 27 for yards. For a circle, use π × radius² × depth (in feet).
Also, the calculator gives volume, not weight. Different materials have different densities – a cubic yard of dry topsoil weighs about 1.5–2 tons, while compost is lighter. Check with your supplier for weight limits if you’re hauling it yourself.
Frequently Asked Questions
How many bags of soil do I need for 10 cubic feet?
Divide the total cubic feet by the bag size. If bags are 2 ft³ each, you need 10 ÷ 2 = 5 bags. Always round up to the next whole bag, since you can’t buy a fraction of a bag.
What is the difference between cubic feet and cubic yards?
A cubic yard is 27 cubic feet (3 ft × 3 ft × 3 ft). Bulk orders are usually priced per cubic yard, while retail bags are per cubic foot. To convert, multiply cubic yards by 27 to get cubic feet, or divide cubic feet by 27 to get cubic yards.
Should I order extra soil for settling?
Yes, for loose materials like topsoil or compost, order 10-15% more than the calculated volume. For gravel or crushed stone, settling is minimal, so 5% extra is usually enough.
Can I use this for a raised garden bed?
Yes, measure the inside length, width, and depth of the bed. If the bed is 8 ft long, 4 ft wide, and 1 ft deep (12 in), the volume is 8 × 4 × 1 = 32 ft³, or about 1.19 yd³.
How deep should I make a vegetable garden bed?
Most vegetables need at least 6–8 inches of quality soil, while root crops like carrots prefer 10–12 inches. If your bed sits on grass, consider 8–12 inches to allow for root growth.
Does the calculator work for circular planters?
Not directly. For a circle, measure the radius (half the diameter) in feet, then use: π × radius² × depth (in feet) to get cubic feet. Divide by 27 for cubic yards.
Related
Formula used
in l | Lawn length | ft | 40 | 0 | 100000 in w | Lawn width | ft | 25 | 0 | 100000 in d | Depth | in | 3 | 0 | 120 out yd | Volume | yd³ | l * w * d / 324 | 2 out ft3 | Volume | ft³ | l * w * d / 12 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation, rounded as each result states. See how the calculators work or report an error.
More in this bed
- Fix msmpeg2vdec.dll Errors in Windows
- How to Update Sonos App and Speakers
- Unlock iPad Without Apple ID: Is It Possible?
- iOS 18 WhatsApp Notifications Not Working? Fix
- Fix Windows Cannot Locate Suitable Printer Driver
- Spotify Private Listening: Turn It On and Off