If Disk Utility says “Can’t repair this disk” on your MacBook, the drive has a filesystem or hardware problem that the built-in First Aid tool cannot fix on its own. The fix usually involves booting into macOS Recovery, running fsck in single-user mode, or using a third-party disk utility, and in some cases the drive is failing and needs replacement. Below is a step-by-step guide for the most common scenarios, plus what to do when the repair genuinely fails.
What “Can’t Repair This Disk” Actually Means
Disk Utility’s First Aid runs a series of checks on the volume’s filesystem structure (APFS or HFS+). When it reports it can’t repair the disk, it means one of three things:
- Filesystem corruption too severe for the tool: Directory entries, the volume header, or the catalog file are damaged in a way First Aid cannot rebuild.
- The disk itself is failing: Bad sectors, failing read/write heads, or controller errors prevent the filesystem from being read reliably.
- The volume is mounted or in use: First Aid often fails if the startup volume is active, because macOS won’t let you modify a mounted system volume.
Knowing which case you’re in determines the right fix. If the error appears on an external drive, the problem is often the cable or the drive’s enclosure, not the filesystem.
First: Try First Aid in macOS Recovery
Disk Utility cannot repair the startup disk while macOS is running normally. You must boot into Recovery and run First Aid from there. Here’s how:
- Shut down your MacBook completely.
- Turn it on and immediately press and hold Command (⌘) + R until you see the Apple logo or a spinning globe (for Internet Recovery).
- Select Disk Utility from the macOS Utilities window.
- Choose your startup volume (usually named “Macintosh HD”) and click First Aid.
- Click Run and wait. If it succeeds, restart normally.
If First Aid fails with “Can’t repair this disk,” do not restart yet—proceed to the next steps while still in Recovery.
Run fsck in Single-User Mode (Intel Macs)
On Intel Macs, you can bypass the graphical interface and run the filesystem check directly from the command line. This sometimes succeeds where Disk Utility fails because it runs with fewer background processes interfering.
- Restart your Mac and hold Command (⌘) + S to boot into single-user mode.
- At the command prompt, type:
/sbin/fsck -fyand press Enter. - If it reports “FILE SYSTEM WAS MODIFIED,” run the command again until it says “The volume appears to be OK.”
- Type
rebootand press Enter.
On Apple Silicon Macs (M1 and later), single-user mode is not available in the same way. Instead, you’d use Terminal from Recovery and run fsck_apfs manually:
- Boot into Recovery (hold the power button until “Loading startup options” appears, then click Options).
- Open Terminal from the Utilities menu.
- Type
diskutil listto find your disk identifier (e.g.,disk3s1). - Run
fsck_apfs -n /dev/disk3s1(replace with your identifier).
If fsck reports errors it cannot fix, the filesystem structure is likely damaged beyond what software repair can handle.
Check the Disk’s Hardware Health
If software repairs fail, the drive may be physically failing. macOS includes a built-in tool called SMART Status that can indicate hardware problems.
- Go to About This Mac → System Report → Storage.
- Look for “SMART Status” next to your internal drive. If it says “Failing” or “Not Supported,” the drive is likely bad.
- For external drives, you can check SMART status using third-party tools like DriveDx or smartctl (via Homebrew), but those are not built into macOS.
If SMART is failing, no software repair will help. Back up whatever you can immediately and replace the drive. If the drive is under warranty, contact Apple or the drive manufacturer.
Use a Third-Party Disk Utility
When Apple’s tools fail, dedicated data recovery and disk repair software can sometimes fix filesystem issues that First Aid cannot. Popular options include:
- DiskWarrior – Rebuilds the directory structure and is often effective on HFS+ volumes.
- TechTool Pro – Offers more thorough hardware and filesystem tests.
- Data Rescue – Focuses on recovering files from damaged volumes, even if the filesystem isn’t repairable.
These tools are not free, and they are not guaranteed to work. If the drive is making clicking noises or is not detected at all, stop using it immediately—further attempts can worsen data loss.
Recover Your Data Before Erasing
If repair is impossible, your priority should be recovering your files. Do not erase the disk until you’ve tried to copy data off it.
- Boot from an external macOS installer or use Target Disk Mode (Intel) to access the drive from another Mac.
- Copy important files to another drive using Finder or
rsyncin Terminal. - If the volume mounts but is slow or error-prone, copy the most critical files first.
- If the volume won’t mount, use data recovery software that can scan the raw disk.
Once you have your data, you can erase the disk and reinstall macOS. If the disk is healthy, this often resolves the issue because it creates a fresh filesystem.
When to Replace the Drive
If the disk fails SMART, makes unusual sounds, or repeatedly fails to repair after multiple attempts, it’s time to replace it. On most MacBook models, the internal SSD is soldered to the logic board, meaning the whole logic board may need replacement. On older models with removable SSDs, you can swap it yourself or take it to a repair shop.
Before replacing, consider these points:
- Check if your MacBook is still under AppleCare or consumer protection laws.
- If the drive is external, try a different cable, port, or computer to rule out the enclosure.
- If the drive is under warranty, the manufacturer may replace it for free.
Frequently Asked Questions
Will erasing the disk fix “Can’t repair this disk”?
Yes, erasing the disk and reinstalling macOS will almost always fix filesystem corruption, because it creates a brand-new filesystem. However, it will delete all data, so only do this after you’ve recovered what you can. If the disk is physically failing, erasing won’t help—the hardware errors will return.
Can I use Terminal to force a repair?
You can run fsck with the -y flag to answer “yes” to all prompts, but you cannot force a repair that the tool doesn’t support. If fsck reports “The volume could not be repaired,” further attempts will not help. Forcing a repair on a failing drive can cause more damage.
Why does First Aid fail on my external drive but work on the internal one?
External drives often fail because of the USB cable, the enclosure’s bridge board, or power delivery issues. Try a different cable, a direct connection (if possible), or another computer. Also, some external drives are formatted as exFAT, which First Aid may not fully support—check the format in Disk Utility.
Is there a free way to recover data from a disk that won’t repair?
Yes, you can try open-source tools like TestDisk and PhotoRec (from cgsecurity.org). TestDisk can repair some partition tables, and PhotoRec can recover files by scanning raw data. They are command-line tools and require some technical comfort, but they are free and widely used.
Does this error mean my MacBook is broken?
Not necessarily. The error is about the disk, not the MacBook itself. If the disk is external or removable, the MacBook may be fine. If it’s the internal SSD and it’s failing, the MacBook will need a new drive or logic board, but the rest of the computer is likely still functional.
Can I prevent this error in the future?
Regularly back up your data with Time Machine, avoid force-ejecting external drives, and run First Aid periodically. For SSDs, avoid filling them to more than 90% capacity, as that can cause filesystem stress. For external drives, use safe ejection and consider a UPS if you live in an area with power outages.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone