sodcalculator

10 Tech How-To

Epson Error Code 0x97: Fix It Now

Guide 10-43312 · Updated · Step by step

Epson error code 0x97 is a fatal firmware or hardware fault that stops the printer with a flashing or steady error light and often a message like “Printer error. Turn the power off and then on.” The fix usually involves power cycling, checking for paper jams or obstructions, and resetting the printer—but if the error persists, it typically requires service or replacement of the main board or printhead assembly. This guide explains what triggers the error, walks through step-by-step fixes, and answers common questions.

What Does Error 0x97 Mean?

Error 0x97 is a generic “fatal error” code used by many Epson inkjet printers (e.g., EcoTank, WorkForce, Expression, and SureColor models). It indicates that the printer’s main controller board detected an abnormal condition it cannot recover from. The printer halts all operations to prevent further damage. Common triggers include:

  • Paper jams or foreign objects (e.g., scraps of paper, stickers, dust) blocking the printhead carriage path.
  • Firmware corruption after a failed update or power surge.
  • A stuck or failing printhead carriage, encoder strip, or timing belt.
  • Electrical faults on the main board or a shorted component.
  • Overheating or a sensor malfunction.

Because the code is generic, the exact cause varies by model and situation. The error can appear randomly or after a specific action like loading paper or starting a print job.

How to Fix Error 0x97: Step-by-Step

Before contacting support, try these steps in order. Most simple cases are resolved by a full power reset and clearing obstructions.

  1. Turn off the printer using the power button. If it does not respond, unplug the power cord from the wall outlet and from the printer.
  2. Wait 10–15 minutes to let internal capacitors discharge and the printer fully reset.
  3. Open all access panels (front, rear, and scanner lid if applicable). Look for jammed paper, torn pieces, or any foreign objects. Remove anything you find gently.
  4. Manually move the printhead carriage (the part that holds the ink cartridges) left and right to ensure it moves freely. If it is stuck, check for obstructions or dried ink on the rail.
  5. Reconnect the power cord directly to a wall outlet (not a surge protector or extension cord). Plug the printer back in and turn it on.
  6. If the error persists, try a factory reset: with the printer off, hold the Stop button (or Resume) and press the Power button. Keep holding Stop for about 10 seconds, then release both. This may clear a temporary firmware glitch.
  7. If the error still appears, the issue is likely hardware. Contact Epson support or a qualified technician. Do not attempt to disassemble the printer yourself unless you have experience, as you may void the warranty or cause injury.

Why Does 0x97 Happen So Often?

Epson printers are generally reliable, but 0x97 is one of the more frequently reported errors on forums and support threads. A few reasons:

  • EcoTank models have a different ink delivery system, and the printhead can get clogged or the damper can leak, causing electrical shorts.
  • Firmware updates sometimes introduce bugs that trigger false error codes. If the error appeared right after an update, a reset may help.
  • Power surges can corrupt the printer’s EEPROM (memory that stores settings). Using a surge protector may prevent recurrence.
  • Dust and debris accumulate over time, especially in homes with pets or high traffic.

It is not a sign that the printer is “bad”—it is a safety mechanism. The printer stops to protect itself from further damage.

Common Misconceptions About 0x97

“It means the printer is dead.” Not always. Many users report that a simple power cycle or clearing a jam fixes it. Only after trying the steps above should you consider replacement.

“I need to replace the ink cartridges.” Error 0x97 is not related to ink levels or cartridge recognition. If the error were about ink, you would see a different code (like 0xEA or a blinking ink light).

“I can fix it by resetting the waste ink counter.” Some guides suggest using a reset tool to clear the waste ink counter, but that is for errors like 0xEA or “Ink pad is at the end of its service life.” 0x97 is a different fault and a reset tool will not help.

When to Seek Professional Repair vs. Replacing the Printer

If the error persists after all manual steps, you have two options:

  • Professional repair: If your printer is under warranty, contact Epson support first. Out-of-warranty repairs often cost $100–$200, which may be close to the price of a new budget printer. For high-end models (e.g., large-format or EcoTank with high page yields), repair may be worth it.
  • Replacement: If the printer is older than 3–4 years, or if the repair cost exceeds 50% of a new comparable model, replacement is usually more economical.

Before deciding, get a repair quote and compare it with the current price of a similar printer. Also consider that a technician might not guarantee the fix if the main board is faulty.

How to Prevent Error 0x97 in the Future

While not all causes are preventable, these habits reduce the risk:

  • Use a surge protector to protect against power spikes.
  • Keep the printer clean—dust the exterior and use a soft brush to remove debris from the paper path.
  • Use quality paper and store it in a dry place to prevent jams and paper dust.
  • Update firmware only when needed and ensure the printer is connected to a stable power source during the update.
  • Print regularly (at least once a week) to prevent ink from drying and clogging the printhead.
  • Turn off the printer properly using the power button, not by unplugging it mid-operation.

Frequently Asked Questions

Can I reset error 0x97 without turning off the printer?

No. The error halts the printer, and a power cycle is the first step. If the printer does not respond to the power button, unplug it.

Will removing and reinstalling the ink cartridges fix 0x97?

No. The error is not related to ink cartridge installation. However, if the carriage is stuck due to a misaligned cartridge, reseating them might help, but it is not a direct fix.

Is error 0x97 covered under warranty?

It depends on the cause. If it is a manufacturing defect, yes. If it is caused by physical damage, a power surge, or misuse, it may not be covered. Contact Epson support with your model and serial number to check.

Can I fix 0x97 by updating the firmware?

If the error was caused by a firmware bug, updating to the latest version might help. However, if the printer is stuck in the error state, you may not be able to update it. Try the reset steps first, and if the printer works again, check for updates.

Does error 0x97 damage the printer permanently?

Not necessarily. If the cause is a temporary glitch or a paper jam, clearing it and resetting will restore normal operation. If the main board is faulty, the printer may not work again without repair.

Why does my Epson show 0x97 even after I cleaned the printhead?

Cleaning the printhead does not address the underlying electrical or mechanical fault. The error is not about ink flow. If it persists, the issue is likely hardware-related.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →