Error code 0xc0000221 stops Windows from starting and usually points to a corrupted system file or a failing hard drive. This guide explains what causes it and walks you through the fixes that work, from automatic repair to command-line tools.
What Does Error 0xc0000221 Mean?
When Windows boots, it loads critical system files (like ntoskrnl.exe and winload.exe) into memory. Error 0xc0000221 appears when the boot manager detects that one of these files is corrupted, missing, or fails a digital signature check. The full message usually reads: “Windows could not load because a required file is missing or corrupt.”
This is a boot-time error, meaning you see it before the desktop appears. It is different from a blue screen that happens after you log in. The error can occur after a failed Windows update, a sudden power loss, malware infection, or a failing hard drive with bad sectors.
Common Causes of 0xc0000221
- Corrupted system files – A partial update, improper shutdown, or disk write error can damage core boot files.
- Failing hard drive or SSD – Bad sectors or a dying drive can corrupt data that Windows needs to start.
- Recent hardware or driver changes – New RAM, a new graphics card, or an updated driver that conflicts with the system.
- Malware or virus infection – Some malware targets boot files to prevent the system from loading.
- Overclocking or unstable BIOS settings – An unstable CPU or memory overclock can cause data corruption during boot.
Before You Start: Prepare a Recovery Environment
Most fixes require booting into the Windows Recovery Environment (WinRE). If Windows fails to start three times, it should automatically enter WinRE. If not, you can use a Windows installation USB drive – boot from it and choose “Repair your computer” instead of “Install now.”
You will need a working computer to create a USB drive if you don’t have one. Use the Microsoft Media Creation Tool (or the Windows 11 equivalent) to make one. This process erases the USB drive, so back up anything on it first.
How to Fix Error 0xc0000221 (Step-by-Step)
Try these fixes in order. Stop when the error goes away.
1. Run Startup Repair
- Boot into WinRE (as described above).
- Go to Troubleshoot > Advanced options > Startup Repair.
- Select your operating system and let it run. It will attempt to fix boot problems automatically.
- Restart and see if Windows loads.
This works for simple boot file issues but often fails for 0xc0000221 because the corruption is deeper.
2. Use System Restore
- In WinRE, go to Troubleshoot > Advanced options > System Restore.
- Choose a restore point from before the error started appearing.
- Follow the prompts. This will revert system files and settings to an earlier state without affecting personal files.
If System Restore is not available (no restore points), skip to the next step.
3. Run SFC and DISM from Command Prompt
- In WinRE, go to Troubleshoot > Advanced options > Command Prompt.
- Type the following command and press Enter:
sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows
(If your Windows drive is not C:, replace the letters. You can check withdiskpartandlist volume.) - When it finishes, run:
DISM /Image:C:\ /Online /Cleanup-Image /RestoreHealth
(Note: This command works only if Windows is installed on C:. If not, adjust the path.) - Restart and try to boot.
These tools repair corrupted system files. SFC replaces damaged files with cached copies; DISM fixes the image itself.
4. Check Your Disk for Errors
- Open Command Prompt from WinRE as above.
- Run
chkdsk C: /f /r(replace C: with your Windows drive). - Type
Yif prompted to schedule a check on next restart, then runexitand restart.
This scans for bad sectors and attempts to recover readable data. It can take a long time (hours on large drives). If chkdsk finds many errors, your drive may be failing.
5. Check RAM and Hardware
Faulty RAM can cause file corruption during boot. Use the Windows Memory Diagnostic tool (if you can boot to the desktop) or a third-party tool like Memtest86 from a USB drive. If you recently added RAM, remove it and try booting without it. Also, reset your BIOS to default settings to rule out overclocking issues.
6. Rebuild the Boot Configuration Data (BCD)
- Open Command Prompt from WinRE.
- Run these commands one by one:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd - If you get an error on
/fixboot(access denied), try:
bootsect /nt60 SYSorbootsect /nt60 ALL - Restart.
This rebuilds the boot configuration files that tell Windows how to start.
7. Reset or Reinstall Windows
If none of the above works, you may need to reset Windows. In WinRE, go to Troubleshoot > Reset this PC. Choose “Keep my files” to preserve personal data, but note that installed programs will be removed. If even that fails, a clean reinstall from a USB drive is the last resort – back up your data first.
What to Do If the Error Keeps Coming Back
If you fix the error and it returns, the root cause is likely hardware. Run a full diagnostic on your hard drive using the manufacturer’s tool (SeaTools for Seagate, WD Data Lifeguard for Western Digital, etc.). Also test your RAM with Memtest86 for at least a few passes. If the drive is failing, replace it and reinstall Windows.
Frequently Asked Questions
Can I fix error 0xc0000221 without a Windows installation USB?
Yes, if Windows can boot into the Recovery Environment automatically (after three failed boot attempts). If not, you will need a USB drive to access the repair tools. You can also try pressing F8 or Shift+F8 during boot, but this often doesn’t work on modern systems with fast startup.
Will I lose my files if I run these commands?
No. The commands like sfc, DISM, chkdsk, and bootrec do not delete personal files. However, Reset this PC with “Keep my files” will remove installed apps, and a clean install will erase everything on the system drive. Always back up important data if you can.
What does the error code 0xc0000221 mean in simple terms?
It means Windows found a corrupted or missing system file during the boot process and refused to load. Think of it as a guard checking a passport – if the file’s signature doesn’t match, Windows stops.
Is this error caused by a virus?
It can be. Some malware deliberately corrupts boot files to prevent security software from running. If you suspect malware, run a full scan with Windows Defender or a bootable antivirus tool after you manage to boot.
How long does chkdsk take?
It depends on the drive size and speed. A 1TB hard drive can take several hours, while an SSD might finish in 30 minutes. Let it run overnight if needed. Do not interrupt it – that can cause more corruption.
Do I need to reinstall Windows if nothing works?
Not necessarily. If the drive is physically failing, you need a new drive. If the drive is fine but Windows is too corrupted, a reset might work. A clean reinstall is the most reliable fix but requires reinstalling all your programs.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Disable Autocorrect on iPhone or iPad: Quick Guide
- Custom Keyboard Shortcuts on Windows 11 & macOS
- Restore Windows 11 Display Scaling to Recommended
- Semiconductor Cycle: How Investors Track It0.0
- Microsoft Store Error 0x80073d12: Fixes That Work
- View Notification Count on iPhone: Full Guide