If Face ID stops working on your iPhone, the fix is usually simple: clean the TrueDepth camera, restart the phone, or re-enroll your face. When those don’t work, a software update or a reset of Face ID settings usually resolves it. This guide walks through every likely cause and the exact steps to try, from quick checks to more involved fixes.
How Face ID Works
Face ID uses the TrueDepth camera system at the top of your iPhone to project over 30,000 invisible infrared dots onto your face and read the pattern. It captures a depth map and an infrared image, then compares that data to the mathematical representation stored in the Secure Enclave. The Secure Enclave is a dedicated security processor that keeps your face data encrypted and on-device—nothing is sent to Apple’s servers.
Because Face ID relies on infrared and depth, it works in the dark, with hats, glasses, and most sunglasses. It also adapts over time as your appearance changes, like growing a beard or wearing makeup. However, the system is sensitive to physical obstructions, extreme angles, and certain environmental conditions.
Quick Checks Before You Panic
Before diving into resets, try these three things—they solve a surprising number of Face ID failures:
- Clean the lens and sensor area. Dirt, oil, or a smudge on the TrueDepth camera can block the infrared projector. Wipe the top of the screen with a soft, dry, lint-free cloth.
- Remove any screen protector or case. Some screen protectors have a cutout that covers the sensor, and cases can partially block it. Test Face ID with the case off.
- Restart your iPhone. A temporary software glitch can disable Face ID. Press and hold the side button and either volume button until the power slider appears, then slide to power off. Wait 30 seconds, then turn it back on.
If Face ID still doesn’t work, move on to the next steps.
Check Face ID Settings
Face ID can be turned off for specific uses, or entirely, in Settings. Go to Settings > Face ID & Passcode and enter your passcode. Make sure the toggles for iPhone Unlock, Apple Pay, iTunes & App Store, and Password AutoFill are on as needed. If you see “Face ID is turned off” at the top, tap Set Up Face ID to re-enroll.
Also check Settings > Screen Time > Content & Privacy Restrictions—if Face ID is restricted there, it will be grayed out in Settings. If you can’t toggle it, the restriction is the cause.
Reset Face ID and Re-Enroll
If settings look fine, reset Face ID and set it up again. This clears any corrupted face data and gives you a fresh start.
- Go to Settings > Face ID & Passcode.
- Tap Reset Face ID.
- Tap Set Up Face ID and follow the prompts. Hold the phone at eye level, about an arm’s length away, and slowly rotate your head in a circle twice.
When re-enrolling, make sure your face is well-lit (though Face ID works in the dark, the setup screen needs light to guide you), and remove any masks or heavy scarves. If you wear glasses daily, keep them on during setup so Face ID learns your baseline with them.
Software Updates and Restore
iOS bugs can break Face ID. Check for updates: Settings > General > Software Update. If an update is available, install it and test Face ID again.
If you’re already on the latest version, try a force restart (different from a normal restart): press and release Volume Up, then Volume Down, then hold the side button until the Apple logo appears. This clears deeper system caches without erasing data.
If Face ID still fails, the next step is a backup and restore. Use a computer to back up your iPhone, then restore it to factory settings. After the restore, set up as new (not from a backup) to rule out a corrupt settings file. If Face ID works after that, restore your data from the backup. If it still doesn’t work, the issue is likely hardware.
Hardware Damage and Apple Support
Face ID can stop working after physical damage, even if the screen looks fine. A cracked screen, liquid exposure, or a drop can misalign the TrueDepth camera or damage its components. Also, if you’ve had a third-party screen replacement, Face ID often stops working because the sensor is paired to the original display. Apple’s repair policy requires genuine Apple parts for Face ID to function.
If you’ve tried all software fixes and Face ID still doesn’t work, contact Apple Support or visit an Apple Store or authorized service provider. They can run diagnostics to confirm whether the sensor is faulty. If your iPhone is under warranty or AppleCare+, the repair may be covered. If not, you’ll receive a cost estimate. Never attempt to open the phone yourself—the TrueDepth camera is delicate and you could cause further damage.
Common Face ID Misconceptions
Many people think Face ID is broken when it’s actually working as designed. Here are a few myths:
- “Face ID doesn’t work in the dark.” It does—the infrared projector doesn’t need visible light.
- “It won’t work with a mask.” On iPhones with Face ID, you can set up “Face ID with a Mask” (iOS 15.4 and later) that uses the area around your eyes. It’s less secure but works.
- “It’s less secure than Touch ID.” Apple states Face ID has a 1 in 1,000,000 false positive rate, compared to 1 in 50,000 for Touch ID.
- “It only works with one face.” You can set up an “Alternate Appearance” in Face ID settings to recognize a second face, like a partner or a different look (e.g., with and without glasses).
Frequently Asked Questions
Why does Face ID stop working after a screen replacement?
Face ID components are paired to the original display. If a third-party screen is installed, the phone may not recognize the TrueDepth camera, disabling Face ID. Apple’s repair program uses genuine parts that maintain the pairing. If you’ve had a third-party repair, you’ll need to go to Apple or an authorized provider to restore Face ID.
Can I use Face ID with sunglasses?
Most sunglasses work, but some with infrared-blocking coatings can interfere. If Face ID fails with your sunglasses, the phone will ask for your passcode. You can try a different pair or remove them. The “Require Attention” setting (in Face ID & Passcode) can also be turned off to improve compatibility, but it reduces security.
Does Face ID work if I change my hairstyle or grow a beard?
Yes. Face ID uses a depth map and adapts to gradual changes. If you make a drastic change (like shaving a full beard), Face ID may ask for your passcode once, then update its stored data. You can also set up an Alternate Appearance to handle two distinct looks.
Why does Face ID say “Face ID is not available”?
This message appears when the TrueDepth camera is damaged or disconnected. It’s a hardware issue, not a settings problem. Try a force restart first, but if the message persists, contact Apple Support for repair.
What should I do if Face ID works but is slow?
Slow Face ID is usually due to a dirty sensor, poor lighting (though it works in the dark, low light can slow it), or holding the phone too far away. Clean the sensor, hold the phone at arm’s length, and ensure your face is centered. If it’s still slow, reset Face ID and re-enroll.
Can I use Face ID with a mask?
On iPhones with Face ID, you can enable “Face ID with a Mask” in Settings > Face ID & Passcode. This works with iOS 15.4 or later and uses the unique area around your eyes. It’s less secure, so Apple requires you to set it up separately. Without this feature, Face ID won’t recognize a masked face.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- PowerPoint vs Keynote: Key Differences
- How to Sign Out of OneDrive in Windows 10
- Reduce Memory Use in Windows When RAM Is Low
- How to Set Up and Use Credential Manager on Windows 10
- Fix Microsoft Edge Battery Drain on Windows 11
- Type to Siri Instead of Talking on iPhone (iOS 11)