If your AirPods connect for music but go silent or drop out during phone calls, the fix is usually a quick reset of the Bluetooth connection, a check of your microphone settings, or a change to how calls are routed. Most call-related AirPod problems come from the microphone picking the wrong device, an outdated firmware, or a glitchy Bluetooth profile — not from broken hardware. Below are the exact steps to diagnose and fix the issue on both iPhone and Android, plus what to do if the problem persists.
Why AirPods Fail Specifically on Calls
AirPods use two separate audio paths: one for media (music, videos, games) and one for phone calls. During calls, your iPhone switches to a narrower bandwidth codec and activates the microphone array. If any part of that call-specific chain fails — the mic selection, the speech codec, or the call-routing setting — you’ll hear nothing or the other person won’t hear you, even though music plays fine.
Common culprits include:
- Microphone set to “Automatic” — the AirPods may keep switching between the left and right mic, causing cutouts.
- Bluetooth profile corruption — the Hands-Free Profile (HFP) that handles calls can get stuck after a firmware update or a failed connection.
- Low battery on one bud — calls drain the mic and speaker simultaneously, so one side may die mid-call.
- Software bugs — a recent iOS or AirPods firmware update can introduce call-specific glitches that are fixed by a reset.
Step-by-Step Fixes (Try in This Order)
- Check the microphone setting — On iPhone, go to Settings > Bluetooth, tap the “i” next to your AirPods, then tap Microphone. If it’s on “Automatic,” switch it to “Always Left” or “Always Right.” This stops the mic from switching mid-call.
- Disable automatic ear detection — In the same AirPods settings, turn off Automatic Ear Detection. This prevents the AirPods from pausing or rerouting audio when they think they’re not in your ears.
- Forget and re-pair — Go to Settings > Bluetooth, tap the “i” next to your AirPods, choose Forget This Device, then put the AirPods back in the case, hold the setup button on the back for 15 seconds until the LED flashes amber then white, and pair again.
- Reset network settings (iPhone) — If re-pairing doesn’t work, go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. This clears all saved Wi-Fi and Bluetooth connections, which often fixes stubborn call-routing issues.
- Update firmware — Keep your AirPods in the case, connected to power, and near your iPhone. They update automatically, but you can force it by leaving them plugged in overnight. Check the current firmware in Settings > Bluetooth > “i” > About.
- Clean the microphones — The tiny mesh holes at the bottom of each stem can clog with earwax or lint. Use a dry, soft-bristled brush (like a clean toothbrush) to gently remove debris. Never use water or sharp objects.
If You’re Using AirPods with Android or a PC
AirPods work with Android and Windows, but call quality is often worse because these devices use the generic Bluetooth Hands-Free Profile, which reduces audio quality to make room for the microphone. If calls sound robotic or cut out:
- Make sure the AirPods are set as both the “media” and “call” audio device in your system’s sound settings.
- On Android, go to Settings > Connected devices > Bluetooth, tap the gear icon next to your AirPods, and enable “Phone calls” (if available).
- On Windows, open Sound Settings and set both “Playback” and “Recording” to the AirPods Hands-Free device — not the stereo one.
- If the other person can’t hear you, check that the microphone input is set to “AirPods Hands-Free” and not the built-in laptop mic.
What to Do If Only One AirPod Works for Calls
If one side works for calls but the other doesn’t, the problem is likely hardware-related — maybe a clogged mic or a dead battery. First, try the cleaning step above. If that doesn’t help, check the battery levels of each bud (on iPhone, open the case lid near the phone). If one bud shows much lower charge, it may be draining faster because it’s the default mic. Change the microphone setting to “Always Left” or “Always Right” and see if the problem switches sides. If it does, the mic on the other bud is faulty and may need service.
When to Factory Reset vs. Replace
A factory reset (the forget-and-re-pair process) fixes most software-related call issues. But if you’ve done that and still have problems, consider:
- Battery health — AirPods batteries degrade over time; after about two years, they may not hold enough charge for a full call. Apple and other repair shops offer battery replacement for AirPods.
- Physical damage — Dropping an AirPod or exposing it to water can damage the mic or speaker. Check for visible cracks or water damage indicators.
- Compatibility — Very old AirPods (1st generation) may have issues with newer iOS versions. If you’re on an older device, check Apple’s compatibility list.
If none of the above works, contact Apple Support or visit an authorized service provider. They can run a diagnostic to determine if it’s a hardware fault.
Frequently Asked Questions
Why do my AirPods work for music but not calls?
This is almost always a Bluetooth profile issue. Music uses the A2DP profile, while calls use the Hands-Free Profile (HFP). If HFP fails to initialize, you get no call audio. Re-pairing or resetting network settings usually fixes it.
How do I force my AirPods to use a specific microphone?
On iPhone, go to Settings > Bluetooth, tap the “i” next to your AirPods, then tap Microphone and choose “Always Left” or “Always Right.” This prevents automatic switching that can cause cutouts.
Why can the other person not hear me on calls?
Check the microphone setting (as above), clean the mic mesh, and make sure the AirPods are selected as the input device on your phone or computer. If you’re on Android or Windows, the Hands-Free profile must be enabled.
Do AirPods work with Android for phone calls?
Yes, but call quality may be lower because Android uses the generic Hands-Free profile. You can still make and receive calls, but the audio may sound compressed. Some Android phones also have issues with mic selection — check the Bluetooth device settings.
How do I reset my AirPods to fix call issues?
Put both AirPods in the case, close the lid, wait 30 seconds, then open the lid and go to Settings > Bluetooth on your iPhone, tap “i” and choose Forget This Device. Then press and hold the setup button on the back of the case for 15 seconds until the LED flashes amber, then white. Re-pair as new.
Can a dead battery cause call problems?
Yes. If one AirPod has a significantly lower charge, it may shut off during a call, causing audio to drop or the mic to switch. Check battery levels and charge both buds fully before a call.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone