If you see “Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory” (Code 39) or “Windows has stopped this device because it has reported problems” (Code 41), the fix usually involves clearing the driver cache, updating the USB controller driver, or removing the ghost device from Device Manager. Below are the exact steps to resolve both errors on Windows 10 and Windows 11, followed by background on why they happen and how to prevent them.
What Do Error Code 39 and Code 41 Mean?
Both codes appear in Device Manager under the device’s Properties > General tab. They are not unique to USB devices—they can affect any hardware—but they are very common with USB flash drives, external hard drives, printers, and webcams.
- Code 39: “Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.” This usually means the driver file is missing, corrupted, or a leftover driver instance is conflicting with the new one.
- Code 41: “Windows has stopped this device because it has reported problems. (Code 41)” This is a generic message that appears when a device fails to start, often due to a driver problem, a power management issue, or a hardware failure.
Why Do These Errors Happen on USB Devices?
USB devices are hot-pluggable, meaning you can connect and disconnect them while the PC is running. Every time you plug one in, Windows loads a driver stack. If the previous driver instance doesn’t unload cleanly—due to a crash, a forced shutdown, or a faulty driver update—the next connection can trigger Code 39. Code 41 often occurs when the USB device draws more power than the port can supply, or when the device’s firmware sends an error that Windows interprets as a hardware failure.
How to Fix Error Code 39 (Driver in Memory)
Follow these steps in order. Stop after each one and check if the error is gone.
- Restart your PC. This clears the memory and unloads any stuck driver instances. It sounds trivial but resolves many Code 39 cases.
- Uninstall the device driver: Open Device Manager (right-click Start > Device Manager), expand “Universal Serial Bus controllers,” right-click the problematic device (or the USB controller), select Uninstall device, and check “Delete the driver software for this device” if the option appears. Then restart. Windows will reinstall the driver automatically.
- Use the Hardware and Devices troubleshooter: Go to Settings > System > Troubleshoot > Other troubleshooters (Windows 11) or Control Panel > Troubleshooting > Hardware and Sound (Windows 10). Run it and follow the prompts.
- Clear the driver cache manually: Open Command Prompt as Administrator and run
pnputil /enum-driversto list all third-party drivers. Find the one related to your USB device (look for the manufacturer name), then runpnputil /delete-driver oemXX.inf /uninstall(replace oemXX.inf with the actual filename). This removes the corrupted driver package. - Update the USB controller driver: In Device Manager, right-click each entry under “Universal Serial Bus controllers” and select Update driver > Search automatically. Repeat for all of them, including “USB Root Hub” and “Host Controller.”
How to Fix Error Code 41 (Device Reported Problems)
Code 41 is often trickier because it can indicate a hardware issue. Try these steps:
- Reinstall the device driver: Same as above—uninstall the device from Device Manager and restart.
- Check the physical connection: Try a different USB port, preferably a rear port on a desktop. If you’re using a hub, connect directly to the PC. A loose connection or a failing port can cause Code 41.
- Disable USB selective suspend: Go to Control Panel > Power Options > Change plan settings > Change advanced power settings. Expand “USB settings” > “USB selective suspend setting” and set it to Disabled for both battery and plugged in. This prevents Windows from cutting power to the device, which can trigger Code 41.
- Check for hardware failure: Test the USB device on another computer. If it fails there too, the device itself is likely faulty. For external drives, listen for clicking sounds—that’s a mechanical failure.
- Update the chipset drivers: Visit your motherboard or PC manufacturer’s website and download the latest chipset drivers. These control the USB controllers and can fix compatibility issues.
Common Mistakes and Misconceptions
One common mistake is assuming that updating the device driver from the manufacturer’s website is always better than the generic Windows driver. For USB devices, the generic Microsoft driver often works fine; a manufacturer’s driver may be outdated or buggy. Another misconception is that Code 41 always means the device is dead. In many cases, it’s a power management issue that can be fixed by disabling USB selective suspend. Also, don’t forget to check for Windows updates—Microsoft frequently ships USB driver fixes via Windows Update.
When to Replace the Hardware
If you’ve tried all the software fixes and the error persists on multiple computers, the hardware is likely faulty. USB flash drives and cables are cheap—try a different cable first. For external hard drives, data recovery may be needed before discarding the drive. If the device is under warranty, contact the manufacturer for a replacement. There is no software fix for a physically damaged USB port or a dead controller chip.
Frequently Asked Questions
Can I fix Code 39 or 41 without restarting my PC?
Sometimes. You can try uninstalling and reinstalling the driver from Device Manager without a restart, but a restart is often necessary to fully clear the driver memory. If the error returns immediately after reconnecting the device, a restart is the most reliable fix.
Why does the error only happen with one specific USB port?
That suggests the port itself is faulty or has a power delivery issue. Try cleaning the port with compressed air, and if it’s a laptop, check if the port is physically damaged. If the port is part of a hub, replace the hub.
Will these steps work for Bluetooth or Wi-Fi adapters with Code 39?
Yes, the same driver uninstall/reinstall steps apply to any device showing Code 39. The process is identical for Bluetooth, Wi-Fi, and other internal or external devices.
Is it safe to delete all USB drivers from Device Manager?
It’s safe to uninstall the USB controllers and hubs—Windows will reinstall them on restart. You may temporarily lose USB functionality until the restart, but that’s normal. Do not uninstall the chipset driver or the USB controller if you’re not comfortable with the process.
What if the error is on a USB device that has no driver listed in Device Manager?
Check under “Universal Serial Bus controllers” for a device with a yellow exclamation mark. If you don’t see it, plug the device in and watch Device Manager for a new entry that appears briefly. You can also use the “Scan for hardware changes” button to force Windows to detect it.
Can a BIOS setting cause Code 41?
Yes, if the USB legacy support or XHCI hand-off is disabled in BIOS, it can cause USB devices to fail to initialize. Enter BIOS (usually by pressing F2 or Del during boot), look for USB configuration settings, and enable “USB Legacy Support” and “XHCI Hand-off.” Save and exit.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Set a Google Play Budget & Stop Accidental Purchases
- Destiny 2 Error Code Anteater: Fixes & Causes
- View Android Photos on Chromebook: Step-by-Step
- Fix Windows Could Not Prepare the Computer to Boot
- Windows 11 Security Settings: Best Config Guide
- Install Custom Recovery on Samsung Galaxy Trend