If you’re stuck on the “Select operating system” screen during a clean Windows 10 install and can’t click or choose any edition, the fix is usually to disconnect all extra USB drives and remove the installation media’s USB 3.0 port, or to replace the ISO with a fresh download. This problem typically appears when the installer fails to read the edition list from the ei.cfg or pid.txt file, or when a corrupted or incomplete ISO is used. Below, we’ll walk through the exact steps to resolve it, plus what causes it and how to avoid it in the future.
Why the Edition Selection Screen Freezes or Won’t Respond
The Windows 10 setup program reads a small file called ei.cfg (or pid.txt) from the sources folder on the installation media. This file tells the installer which editions (Home, Pro, Education, etc.) to display and which one to install by default. When that file is missing, corrupted, or the media is unreadable, the selection screen can appear blank, greyed out, or simply unresponsive. Another common cause is a conflict with the USB controller—especially on newer systems where the installer’s driver set doesn’t recognize the USB 3.0 port, so it can’t read the media at all. In that case, the screen may show the list but clicking does nothing.
Quick Fix: Disconnect Extra Drives and Switch USB Ports
Before you re-download anything, try these two simple steps—they solve a surprising number of cases:
- Unplug all USB drives (external hard drives, card readers, even your mouse if you have a PS/2 port) except the installation USB.
- Move the installation USB to a different port—preferably a USB 2.0 port (often black) rather than USB 3.0 (blue). If you only have USB 3.0 ports, try a different one.
- Restart the installation and see if the edition list appears correctly.
If that doesn’t work, the problem is almost certainly the media itself.
Recreate the Installation Media with the Media Creation Tool
The most reliable fix is to create a fresh USB drive using Microsoft’s Media Creation Tool. This tool downloads the latest Windows 10 ISO and writes it to a USB drive with the correct file structure. Here’s how:
- On a working PC, go to Microsoft’s official Windows 10 download page and download the Media Creation Tool.
- Run it and choose “Create installation media (USB flash drive, DVD, or ISO file) for another PC.”
- Select the language, edition, and architecture (64-bit or 32-bit) that matches your license.
- Choose “USB flash drive” and select your USB (it will be erased).
- Wait for the download and creation to finish, then try the install again.
This method ensures the ei.cfg file is present and correctly formatted, which eliminates most edition-selection issues.
Manually Add or Edit the ei.cfg File
If you’re using an ISO you downloaded elsewhere or a custom image, you can manually add the ei.cfg file to the sources folder. This forces the installer to show only the edition you specify. Create a plain text file named ei.cfg with these three lines:
[EditionID] Professional [Channel] Retail [VL] 0
Replace Professional with the edition you want (e.g., Home, Education). Save the file and copy it to the sources folder on your USB drive. This is a common workaround for custom ISOs that lack the file. Note that if the file already exists, you can edit it with Notepad, but be careful to keep the correct format.
Check for Corrupted Downloads and Verify the ISO
If you downloaded an ISO from a third-party site, it might be truncated or corrupted. You can verify the integrity by checking the SHA-1 hash against the official value (Microsoft publishes these). But the easiest path is to just re-download using the Media Creation Tool, which does its own checksum. Also, if you’re using an older ISO (e.g., from 2015), it may not support newer hardware, causing the installer to hang. Always use the latest version.
Use the Installation Media on a Different PC to Test
To isolate whether the problem is the media or your PC, try booting the same USB on another computer. If the edition selection works there, the issue is your hardware—possibly a USB controller driver or a BIOS setting. If it fails on both, the media is bad. This quick test saves you from troubleshooting your BIOS unnecessarily.
BIOS/UEFI Settings That Can Interfere
In some cases, the installer can’t read the USB because of UEFI vs. Legacy boot mode mismatches. If your system uses UEFI, ensure the USB is formatted as FAT32 and that Secure Boot is enabled (Windows 10 supports it). If you’re in Legacy/CSM mode, the USB should be NTFS. The Media Creation Tool handles this automatically, but if you manually copied files, you might have the wrong file system. Also, disabling “Fast Boot” in BIOS can help the installer recognize the drive.
Frequently Asked Questions
Why does my Windows 10 install only show one edition?
That’s normal if your ei.cfg file specifies a single edition. Many OEM and volume-license ISOs are configured that way. If you need to choose between Home and Pro, remove the ei.cfg file from the sources folder, which makes the installer scan the install.wim file and list all available editions.
Can I install Windows 10 without selecting an edition?
No, the installer requires you to select an edition to proceed. If the screen is unresponsive, you can’t skip it. You must fix the media or the hardware issue.
What is the difference between ei.cfg and pid.txt?
Both are configuration files in the sources folder. ei.cfg controls edition selection and channel (Retail, OEM, Volume). pid.txt contains a product key that can pre-select an edition and skip the key entry screen. If either is malformed, the setup may behave unexpectedly.
Does the edition selection screen appear if I use a product key?
If you enter a product key during setup (or it’s embedded in the firmware), the installer may skip the edition selection entirely and go straight to the appropriate edition. But if you’re doing a clean install without a key, you’ll see the selection screen.
My USB drive is new and works on other computers—why won’t it work here?
It could be a USB 3.0 driver issue. The Windows 10 setup environment lacks drivers for some USB 3.0 controllers, especially on older installers. Try a USB 2.0 port, or use a tool like Rufus to create the USB with the latest Windows 10 ISO, which includes more drivers.
Is there a way to bypass the edition selection screen?
You can create an answer file (autounattend.xml) that specifies the edition and other settings, which automates the entire setup. But that’s advanced and not recommended for most users—fixing the media is simpler.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Multi-Cloud GPU Failover Design Guide
- Error Code Currant Destiny? Meaning & Fixes
- Spotify Jam Not Working on Mobile? Fixes That Work
- Windows 10 No Internet Secured WiFi Error Fix
- AirPlay with Roku Multi-Device Setup: A How-To
- How to Set a Timer on iPhone (iOS 18 & 17)