sodcalculator

10 Tech How-To

Fix Corrupt Drivers in Windows 10

Guide 10-45385 · Updated · Step by step

Corrupt or outdated drivers can cause crashes, blue screens, poor performance, and hardware that stops working in Windows 10. This guide explains how to identify, repair, and prevent driver corruption using built-in tools and safe manual methods.

What Causes Driver Corruption?

Drivers are software that lets Windows communicate with hardware like graphics cards, network adapters, and printers. Corruption can happen for several reasons:

  • Interrupted updates: Power loss or a forced shutdown during a driver update can leave files half-written.
  • Conflicting software: Installing a new driver over an older one without removing the old version can cause conflicts.
  • Malware or viruses: Some malware targets driver files to gain deep system access.
  • Disk errors: Bad sectors or file system corruption can damage driver files stored on the hard drive.
  • Overclocking or unstable hardware: Memory errors can corrupt data being written to disk.

Sometimes the issue isn’t the driver file itself but the Windows registry entries that tell the system how to load it. A corrupted registry key can make a perfectly good driver fail to start.

Signs Your Drivers Are Corrupt

Common symptoms include:

  • Blue Screen of Death (BSOD) errors like DRIVER_IRQL_NOT_LESS_OR_EQUAL or SYSTEM_THREAD_EXCEPTION_NOT_HANDLED.
  • Hardware stops working or isn’t detected at all (e.g., Wi-Fi disappears, printer not found).
  • Random freezes, stutters, or performance dips, especially during graphics-heavy tasks.
  • Device Manager shows a yellow warning triangle with an error code (e.g., Code 39, Code 43).
  • System event logs show repeated driver-related errors.

If you see these signs, the steps below will help you fix the problem.

Step-by-Step Fixes

Work through these in order, from least to most invasive. Stop when the problem is resolved.

1. Run Windows Update

Windows Update often includes driver updates that Microsoft has tested. Go to Settings > Update & Security > Windows Update and click Check for updates. Install any pending updates, then restart your PC. This can replace a corrupt driver with a fresh, signed version.

2. Use Device Manager to Reinstall the Driver

  1. Right-click the Start button and select Device Manager.
  2. Find the device with the problem (look for the yellow triangle).
  3. Right-click it and choose Uninstall device. Check the box Delete the driver software for this device if available.
  4. Restart your PC. Windows will automatically reinstall the driver.

If Windows doesn’t reinstall it, go to Action > Scan for hardware changes in Device Manager.

3. Roll Back the Driver

If the corruption started after a recent driver update, roll back to the previous version:

  1. In Device Manager, right-click the device and select Properties.
  2. Go to the Driver tab and click Roll Back Driver.
  3. Follow the prompts and restart.

This option is only available if a previous driver is stored on the system.

4. Use System File Checker (SFC) and DISM

These built-in tools scan and repair system files, including drivers.

  1. Open Command Prompt as administrator (type cmd in the search box, right-click, and select Run as administrator).
  2. Type sfc /scannow and press Enter. Wait for the scan to finish.
  3. If SFC finds issues it can’t fix, run DISM /Online /Cleanup-Image /RestoreHealth and then run SFC again.

5. Check Disk for Errors

Run chkdsk /f /r from an elevated Command Prompt. You’ll need to restart to let it run. This repairs bad sectors and file system issues that can corrupt drivers.

6. Restore from a System Restore Point

If the problem started recently, use System Restore to revert your PC to a state before the issue. Search for Create a restore point, click System Restore, and follow the wizard.

7. Reset Windows (Last Resort)

If nothing else works, you can reset Windows 10 while keeping your personal files. Go to Settings > Update & Security > Recovery and choose Get started under Reset this PC. This reinstalls Windows and all drivers, which will eliminate any corruption.

Preventing Future Corruption

  • Keep Windows updated – automatic updates include driver fixes.
  • Download drivers only from the hardware manufacturer’s official site or use Windows Update. Avoid third-party driver updater tools that may install wrong or bundled software.
  • Use a surge protector – power surges can corrupt data on disk.
  • Run regular malware scans with Windows Defender or a trusted antivirus.
  • Check your disk health with tools like WMIC diskdrive get status in Command Prompt. If the status isn’t OK, consider replacing the drive.

Common Misconceptions

“I need a third-party driver updater to fix corruption.” Not true. Windows built-in tools can handle most cases. Third-party tools often cause more problems by installing incorrect drivers.

“Reinstalling Windows is the only fix.” That’s a last resort. The steps above resolve the majority of driver corruption issues without a full reset.

“If the driver is corrupt, the hardware is broken.” Usually not. Corruption is a software issue. Only if the hardware itself is failing (e.g., a dying GPU) would you see persistent issues even after reinstalling drivers.

Frequently Asked Questions

How do I know which driver is corrupt?

Open Device Manager and look for devices with a yellow exclamation mark. Right-click and select Properties – the error code and message will usually point to the driver issue. You can also check Event Viewer under Windows Logs > System for errors mentioning a specific driver file.

Can I fix corrupt drivers without reinstalling Windows?

Yes, in most cases. Use Device Manager to uninstall and reinstall the driver, run SFC and DISM, or roll back to a previous driver. These methods don’t touch your personal files.

What is the difference between SFC and DISM?

SFC (System File Checker) scans and repairs protected system files, including drivers. DISM (Deployment Imaging Service and Management Tool) repairs the Windows system image that SFC relies on. If SFC fails, running DISM first can fix the underlying image, then SFC can do its job.

Is it safe to use a driver updater tool?

Generally, no. These tools often claim to find “outdated” drivers but may install incorrect or even malicious software. It’s safer to get drivers directly from the hardware manufacturer or through Windows Update.

Why does my driver keep getting corrupted?

Recurring corruption often points to a deeper issue: failing hard drive, faulty RAM, malware, or a power supply problem. Run a memory diagnostic (Windows Memory Diagnostic tool) and check disk health. If the problem persists, consider hardware testing.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →