Fix Destiny Error Code Termite: Step-by-Step Guide

Destiny 2’s error code Termite is a network error that typically appears when your connection to Bungie’s servers is unstable or blocked, often related to NAT type or port forwarding issues. The fix usually involves restarting your router, checking your NAT type, and forwarding specific ports. Below is a detailed breakdown of what Termite means, why it happens, and how to resolve it.

What Is Error Code Termite?

Error code Termite is one of many network-related error codes in Destiny 2, named after insects as part of Bungie’s naming convention. It generally indicates a connectivity problem between your console or PC and Bungie’s servers, often caused by an unstable connection, a strict NAT type, or a temporary server hiccup. Unlike some errors that point to a specific in-game activity, Termite is a general network error that can appear during any online activity, including matchmaking, loading into a destination, or even while in orbit.

Why Does Termite Occur?

Termite is almost always a networking issue rather than a problem with your game files or hardware. The most common causes include:

Strict or moderate NAT type – Your router may be blocking the necessary ports, preventing a stable connection to Bungie’s servers.
ISP or regional network congestion – High traffic or maintenance by your internet service provider can cause packet loss or high latency.
Wi-Fi interference – Wireless connections are more prone to drops and instability than wired Ethernet connections.
Bungie server issues – Occasionally, Bungie’s servers themselves may be experiencing problems, leading to widespread Termite errors.
Outdated network drivers or firmware – On PC, outdated network drivers can cause intermittent connectivity issues.

How to Fix Error Code Termite

Follow these steps in order, testing your connection after each one. Most players find that the first or second step resolves the issue.

Restart your router and modem – Unplug both devices, wait 30 seconds, then plug them back in. This clears temporary network glitches.
Use a wired connection – Connect your console or PC directly to the router with an Ethernet cable. This eliminates Wi-Fi interference and often stabilizes the connection.
Check your NAT type – On PlayStation, go to Settings > Network > View Connection Status. On Xbox, go to Settings > General > Network settings. On PC, you can check via the Xbox Game Bar (Windows key + G) or the network settings. Your NAT type should be Open (Type 1 on PlayStation, Open on Xbox). If it’s Strict or Moderate, proceed to step 4.
Enable UPnP (Universal Plug and Play) – Log into your router’s admin page (usually via a browser at an IP like 192.168.1.1) and find the UPnP setting. Enable it, save, and restart your router. UPnP automatically opens the necessary ports for Destiny 2.
Manually forward ports – If UPnP doesn’t work or is unavailable, manually forward the following ports to your console’s or PC’s local IP address. For PC, the ports are: TCP 3074, UDP 3074, TCP 27015-27016, UDP 27015-27016, TCP 27017-27018, UDP 27017-27018, TCP 27019-27020, UDP 27019-27020, TCP 27021-27022, UDP 27021-27022, TCP 27023-27024, UDP 27023-27024, TCP 27025-27026, UDP 27025-27026, TCP 27027-27028, UDP 27027-27028, TCP 27029-27030, UDP 27029-27030, TCP 27031-27032, UDP 27031-27032, TCP 27033-27034, UDP 27033-27034, TCP 27035-27036, UDP 27035-27036, TCP 27037-27038, UDP 27037-27038, TCP 27039-27040, UDP 27039-27040, TCP 27041-27042, UDP 27041-27042, TCP 27043-27044, UDP 27043-27044, TCP 27045-27046, UDP 27045-27046, TCP 27047-27048, UDP 27047-27048, TCP 27049-27050, UDP 27049-27050, TCP 27051-27052, UDP 27051-27052, TCP 27053-27054, UDP 27053-27054, TCP 27055-27056, UDP 27055-27056, TCP 27057-27058, UDP 27057-27058, TCP 27059-27060, UDP 27059-27060, TCP 27061-27062, UDP 27061-27062, TCP 27063-27064, UDP 27063-27064, TCP 27065-27066, UDP 27065-27066, TCP 27067-27068, UDP 27067-27068, TCP 27069-27070, UDP 27069-27070, TCP 27071-27072, UDP 27071-27072, TCP 27073-27074, UDP 27073-27074, TCP 27075-27076, UDP 27075-27076, TCP 27077-27078, UDP 27077-27078, TCP 27079-27080, UDP 27079-27080, TCP 27081-27082, UDP 27081-27082, TCP 27083-27084, UDP 27083-27084, TCP 27085-27086, UDP 27085-27086, TCP 27087-27088, UDP 27087-27088, TCP 27089-27090, UDP 27089-27090, TCP 27091-27092, UDP 27091-27092, TCP 27093-27094, UDP 27093-27094, TCP 27095-27096, UDP 27095-27096, TCP 27097-27098, UDP 27097-27098, TCP 27099-27100, UDP 27099-27100. For PlayStation and Xbox, the required ports are: TCP 1935, UDP 3074, TCP 3074, UDP 3075, TCP 3478-3480, UDP 3478-3480. Note that port forwarding requires a static IP address for your device – check your router’s DHCP settings to assign one.
Update network drivers (PC only) – Go to your motherboard or network adapter manufacturer’s website and download the latest drivers. Alternatively, use Windows Update to check for driver updates.
Check Bungie’s server status – Visit Bungie’s official Help page or their @BungieHelp Twitter account to see if there are any ongoing server issues. If servers are down, wait until they’re back up.
Reset your console’s network settings – On PlayStation, go to Settings > Network > Set Up Internet Connection and set up your connection again. On Xbox, go to Settings > Network > Network settings > Advanced settings > Alternate MAC address > Clear, then restart your console.

Common Misconceptions About Termite

One common misconception is that error code Termite means your account is banned or that your game files are corrupted. This is not the case – Termite is purely a network error. Another misconception is that a VPN will fix it. While a VPN might help in rare cases, it often makes things worse by increasing latency and causing additional routing issues. Stick to the steps above first.

How to Prevent Future Occurrences

Once you’ve fixed Termite, you can take steps to avoid it in the future:

Keep your router’s firmware updated.
Use a wired connection whenever possible.
Avoid playing during peak hours if you have a slow or unstable connection.
If you’re on Wi-Fi, place your console/PC closer to the router or use a mesh network.
Periodically restart your router (e.g., once a week) to clear memory and refresh connections.
Monitor your network for packet loss using tools like ping or a network monitoring app.

Alternatives to Port Forwarding

If port forwarding seems too technical or you can’t access your router settings, there are alternatives. Some routers support a “gaming mode” that automatically optimizes traffic. You can also try setting your console’s IP address as a DMZ (Demilitarized Zone) host in the router – this exposes it fully to the internet, which often resolves NAT issues, but it’s less secure, so only do this temporarily. Another option is to use a different DNS server (like Google’s 8.8.8.8), though this won’t fix NAT issues directly.

Frequently Asked Questions

Does error code Termite mean I’m banned?

No, Termite is a network error, not a ban. Bans are usually accompanied by a different error code (like the “Marionberry” error) and a message from Bungie. Termite simply means the game couldn’t maintain a stable connection to the server.

Will a VPN fix error code Termite?

Usually not. A VPN changes your IP address and routing path, which can sometimes bypass ISP-level throttling, but it more often adds latency and can trigger anti-cheat measures. Try the standard fixes first before considering a VPN.

Why do I get Termite on PC but not on console?

This could be due to different network configurations. On PC, your firewall or antivirus software might be blocking Destiny 2’s connection. Make sure Destiny 2 is allowed through Windows Firewall. Also, check that your PC’s network drivers are up to date.

How do I check my NAT type on PC?

You can check your NAT type by opening the Xbox Game Bar (Windows key + G) and looking at the network status, or by going to Settings > Network & Internet > Status and clicking “View your network properties.” It will show your NAT type under the name of your connection.

I’ve forwarded ports but still get Termite. What else can I do?

First, double-check that you’ve assigned a static IP to your device and that the ports are correctly forwarded to that IP. Also, ensure your router’s firewall isn’t blocking the ports. If it still fails, try resetting your router to factory defaults and reconfiguring, or contact your ISP to check if they’re blocking the ports.

Is error code Termite related to my internet speed?

Not directly. Termite is more about connection stability and NAT type than raw speed. Even a fast connection can produce Termite if there’s packet loss or a strict NAT. A stable 10 Mbps connection can work fine, while a 100 Mbps connection with high jitter might not.

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →