Error 0xc0290122 on Windows 11 is a Windows Update–related failure that usually appears when the system cannot install a cumulative update, often because of corrupted update cache files or a service that has stopped responding. The fix is to stop the Windows Update service, clear the SoftwareDistribution and catroot2 folders, then restart the service and run the update again. Below is the full troubleshooting path, plus what causes the error and how to avoid it recurring.
What Is Error 0xc0290122?
This error code is part of the Windows Update component’s internal error set. It typically occurs during the download or installation phase of a monthly cumulative update, a driver update, or a .NET Framework update. The code itself does not point to a single failing file; instead, it signals that the update process could not complete because a required component was locked, missing, or corrupted.
Users most often see it in the Windows Update settings page as “Something went wrong” with the code, or in the Update History next to a failed update. The error can affect both Home and Pro editions of Windows 11, and it is not tied to a specific hardware configuration. It is more common after a previous update was interrupted (for example, by a forced shutdown) or when third-party security software interferes with the update process.
Why Does This Error Happen?
The underlying causes fall into a few categories:
- Corrupted update cache: The
SoftwareDistributionfolder stores downloaded update files. If these files are incomplete or damaged, the installer cannot verify them and aborts with 0xc0290122. - Stuck Windows Update service: The
wuauservservice may be in a “stopping” or “starting” state, leaving the update pipeline locked. - Third-party antivirus or firewall: Some security suites quarantine or block update payloads, causing the installer to fail mid-process.
- Disk space or permissions: If the system drive is nearly full, or the
catroot2folder (which stores update signatures) has incorrect permissions, the update cannot finalize. - Pending reboot: A previous update may still be in the “pending” state, and the new update cannot start until the system restarts.
How to Fix It: Step-by-Step
Start with the least invasive fix and move down the list. The most reliable method is resetting the update components manually.
Step 1: Run the Windows Update Troubleshooter
- Open Settings (Win + I) → System → Troubleshoot → Other troubleshooters.
- Select Windows Update and click Run.
- Follow the prompts. The tool will attempt to detect and fix common issues like stuck services or corrupted cache.
If the troubleshooter finds nothing, proceed to the manual reset.
Step 2: Clear the Update Cache Manually
This is the core fix. You need to stop the update services, delete the cache folders, and restart the services.
- Open Command Prompt as administrator (right-click Start → Terminal (Admin)).
- Type the following commands, pressing Enter after each:
net stop wuauservnet stop cryptSvcnet stop bitsnet stop msiserver - Rename the cache folders (do not delete them yet, in case you need to roll back):
ren C:\Windows\SoftwareDistribution SoftwareDistribution.oldren C:\Windows\System32\catroot2 catroot2.old - Restart the services:
net start wuauservnet start cryptSvcnet start bitsnet start msiserver - Close the command prompt and try Windows Update again.
If the update installs successfully, you can delete the .old folders later to reclaim disk space. If it still fails, move to the next step.
Step 3: Check Disk Space and Permissions
Ensure your system drive has at least 20 GB free (more if you are installing a feature update). If space is low, use Storage Sense (Settings → System → Storage) to clear temporary files. Also verify that the C:\Windows\SoftwareDistribution folder is not set to “Read-only” (right-click → Properties → uncheck Read-only if it is checked).
Step 4: Temporarily Disable Third-Party Antivirus
If you use a third-party antivirus, disable its real-time protection temporarily (do not turn off Windows Defender permanently). Then retry the update. If it works, add an exception for the Windows Update folders or contact the antivirus vendor for guidance. Re-enable protection immediately after the update.
Step 5: Perform a Repair Upgrade
If none of the above works, a repair upgrade (also called in-place upgrade) reinstalls Windows 11 while keeping your files and installed apps. Download the Windows 11 Installation Assistant from Microsoft’s official site, run it, and follow the prompts. This process replaces system files without wiping your data. It often resolves persistent update errors.
Common Mistakes to Avoid
- Deleting the cache folders without stopping services: This will fail because files are in use, or it can leave the update service in a broken state.
- Skipping the reboot after clearing cache: Always restart your PC after resetting update components before trying again.
- Using “disk cleanup” to remove the .old folders prematurely: Wait until the update succeeds, otherwise you lose the ability to roll back.
- Assuming it is a driver issue: While driver updates can trigger this error, the cache reset works for most cases. Do not jump to reinstalling drivers first.
How to Prevent This Error in the Future
- Always shut down properly: Avoid force power-off during updates. Let the system finish its cycle.
- Keep at least 15-20% of your system drive free: Updates need room to stage files.
- Do not pause updates for long periods: When you resume, the system may have multiple pending updates, increasing the chance of conflicts.
- Run the Windows Update Troubleshooter periodically: It can catch small issues before they become errors.
- If you use third-party security software, keep it updated: Outdated antivirus can block new update mechanisms.
Frequently Asked Questions
Will I lose my files if I clear the SoftwareDistribution folder?
No. The SoftwareDistribution folder only contains temporary update files. Deleting or renaming it does not affect your personal files, documents, or installed programs. Windows will simply re-download the update files needed.
Is error 0xc0290122 the same as 0x800f0922?
No, they are different codes. 0x800f0922 is often related to .NET Framework updates or system partition size. 0xc0290122 is more generic and typically points to update cache corruption or service issues. The fix steps overlap, but the root cause may differ.
Can I use System Restore to fix this error?
Yes, if you have a restore point from before the error started, you can try System Restore. It reverts system files and settings to that earlier state. However, it may not help if the error is caused by a recent update that is already installed. The cache reset method is usually more effective.
Why does the error keep coming back after I clear the cache?
If the error recurs, the problem is likely not just the cache. Check for a third-party antivirus conflict, insufficient disk space, or a pending reboot. Also, run the System File Checker (sfc /scannow) and DISM (DISM /Online /Cleanup-Image /RestoreHealth) from an admin command prompt to repair system file corruption that may be causing the update to fail repeatedly.
Should I download the update manually from the Microsoft Update Catalog?
You can, but it is a last resort. Find the KB number of the failing update in your Update History, search it on the Microsoft Update Catalog, and download the standalone installer. Run it manually. This bypasses the Windows Update client, but you must ensure you download the correct version (x64 vs. ARM64) and that the update is compatible with your build.
Does this error affect Windows 10 as well?
Yes, the same error code can appear on Windows 10. The fix steps are identical, though the exact menu names may differ slightly (e.g., “Update & Security” instead of “Windows Update”). The troubleshooting logic applies to both versions.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Enable Privacy Indicators on Chromebook
- How to Calculate Taxes on Overtime Pay
- VPN Not Working on iPhone? Fixes That Actually Work
- Hide & Unhide Apps on Samsung Phones
- Fix DNS Server Unavailable Error in Windows 11
- Fix iOS 17 Keyboard Not Working Properly