The 0x800703ee error on Windows 10 usually appears when you try to copy, move, or delete files on an external drive, and it means the device is not ready or the connection was interrupted. The fix is to safely reconnect the drive, run the built-in troubleshooting tools, and if needed, format the drive after backing up your data. Below are the exact steps and background to resolve it for good.
What Causes Error 0x800703ee
Windows returns error 0x800703ee (ERROR_DEVICE_NOT_AVAILABLE) when a file operation cannot reach the storage device. On external drives, the most common triggers are:
- A loose USB cable or port that loses connection mid-transfer.
- The drive’s power management settings letting Windows turn it off to save power.
- Outdated or corrupted USB and storage drivers.
- File system corruption on the drive (often from unsafe removal).
- Third-party security software blocking access to the drive.
The error can also appear on internal drives, but on externals it is almost always a connection or power issue. If the drive is brand new, it might also be uninitialized or have an unsupported file system.
Before You Start: Back Up and Check the Drive
If you can still access some files, copy them to another location immediately. If the drive is not recognized at all, do not format it yet – there may be recoverable data. Use a different USB port (preferably a USB 3.0 port directly on the motherboard, not a hub) and a known-good cable. If the drive has its own power adapter, make sure it is plugged in and the LED is lit.
Step-by-Step Fixes
Try these in order. Most users resolve the error with steps 1–3.
- Reconnect the drive safely. Click the Safely Remove Hardware icon in the taskbar, eject the drive, unplug it, wait 10 seconds, then plug it back in. If the drive is not in the tray, shut down Windows, disconnect the drive, boot up, and reconnect it.
- Run the Hardware and Devices troubleshooter. Go to Settings > Update & Security > Troubleshoot > Additional troubleshooters, select Hardware and Devices, and run it. This scans for driver and connection issues.
- Disable USB power saving. Open Device Manager (right-click the Start button), expand Universal Serial Bus controllers, right-click each USB Root Hub and Generic USB Hub, select Properties > Power Management, and uncheck Allow the computer to turn off this device to save power. Do this for all hubs and restart.
- Update or reinstall the drive driver. In Device Manager, expand Disk drives, right-click your external drive, select Update driver > Search automatically. If that fails, right-click and choose Uninstall device, then restart – Windows will reinstall the driver automatically.
- Run CHKDSK to repair file system errors. Open Command Prompt as administrator (type cmd in Start, right-click, Run as administrator) and run:
chkdsk X: /f(replace X with your drive letter). If the drive is in use, you may need to close all programs or run it after a restart. - Check the drive’s file system. If the drive is formatted as exFAT or FAT32, consider converting to NTFS (after backup) for better reliability with large files. Right-click the drive in File Explorer, select Format, choose NTFS, and perform a full format (not quick). This erases all data, so only do it after backing up.
- Scan for malware. Some malware can lock storage devices. Run a full scan with Windows Defender or your trusted antivirus.
When to Try a Different Approach
If the error persists, the drive may have physical issues. Check the drive’s health using WMIC in Command Prompt: wmic diskdrive get status. If it shows “Error” or “Unknown”, the drive may be failing. Also, try the drive on another computer – if it works there, the problem is your USB controller or Windows installation. If it fails on all computers, the drive’s enclosure or the drive itself is likely defective.
Common Misconceptions
One common misconception is that error 0x800703ee means your files are lost. It does not – it only means Windows cannot access the drive at that moment. Another is that formatting always fixes the problem. Formatting only helps if the issue is file system corruption; if the drive is physically failing, formatting can make it worse. Also, some users think that using a USB hub is fine – but hubs often provide insufficient power, causing this exact error. Always connect high-power drives directly to the PC.
Frequently Asked Questions
Will I lose my data if I run CHKDSK?
CHKDSK can repair file system errors without deleting your files, but in rare cases it may move corrupted files to a folder like found.000. It is always wise to back up before running it, even though it usually does not delete anything.
Can this error occur on a new external drive?
Yes, especially if the drive is not initialized or has an unsupported file system. Right-click the Start button, go to Disk Management, and check if the drive shows as “Unallocated”. If so, initialize it as GPT and create a new volume.
Does the error affect both USB and Thunderbolt drives?
It can happen on any external interface, but it is most common on USB due to power and driver issues. Thunderbolt drives rarely have this problem unless the cable is faulty.
Should I disable write caching on the drive?
Disabling write caching can prevent data loss if the drive disconnects unexpectedly, but it slows down transfers. It is not a fix for the error, but it can reduce the risk of corruption. Find the drive in Device Manager, go to Policies, and select “Quick removal”.
Is it safe to use a USB hub with an external drive?
If the hub is powered (has its own AC adapter), it is generally safe. Unpowered hubs often cannot supply enough power, leading to disconnects and the 0x800703ee error. For large drives, always use a direct port.
What if the error appears when copying from the drive to the PC?
The same fixes apply. The error is not direction-specific. If copying to the PC fails, try copying to a different folder or use a different USB port. Also, check if the drive is set to “read-only” – right-click the drive, select Properties, and uncheck “Read-only” if it is enabled.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Show User Library in macOS High Sierra & Sierra
- Device Manager Shortcut: Windows 10 Desktop
- How to Remove Forgotten Passcode from iPhone
- Fix Slow Wi-Fi Problem iPhone X: 9 Steps
- How to Check if a Candidate Accepts Crypto Donations
- How to Listen to Deleted Voicemails on iPhone