If your iPhone X shows “Face ID is not available” on iOS 12, the fix usually involves restarting the phone, resetting Face ID, or cleaning the TrueDepth camera. In most cases, a simple restart or re-enrolling your face resolves the error, but if it persists, it may indicate a hardware issue that requires Apple support.
Why the Error Appears
Face ID relies on the TrueDepth camera system at the top of the iPhone X screen. This system projects over 30,000 invisible infrared dots onto your face and reads the pattern to create a mathematical model. When the phone cannot verify the integrity of that hardware, it disables Face ID entirely and shows “Face ID is not available” instead of just failing to recognize you.
On iOS 12, this error commonly appears after a software update, a restore from backup, or a physical drop. It can also happen if the front camera or the dot projector gets blocked by dirt, a screen protector, or a damaged display. The phone deliberately shuts down Face ID to prevent security issues, so the error is a safety feature, not just a glitch.
First Steps: Restart and Reset
- Restart your iPhone X – Press and hold the side button and either volume button until the “slide to power off” appears. Slide to turn off, wait 30 seconds, then turn it back on.
- Check for updates – Go to Settings > General > Software Update. If iOS 12.1 or later is available, install it. Apple fixed several Face ID bugs in later iOS 12 updates.
- Reset Face ID – Go to Settings > Face ID & Passcode, enter your passcode, tap “Reset Face ID,” then set up Face ID again.
- Clean the top of the screen – Use a soft, lint-free cloth to wipe the TrueDepth camera area. Do not use water or cleaning products directly on the screen.
If the error disappears after a restart, it was likely a temporary software lock. If it returns, move to the next steps.
What to Do If Reset Doesn’t Work
If Face ID still says “not available” after a reset, try restoring your iPhone X from a backup or as a new phone. Connect to a computer, open Finder (macOS Catalina or later) or iTunes (Windows or older macOS), and select “Restore.” This reinstalls iOS 12 completely and can clear corrupted system files that block Face ID.
Before restoring, back up your data to iCloud or the computer. Note that restoring as a new phone is more thorough than restoring from a backup, because a backup might carry over the corrupted settings that caused the problem.
If the error persists after a full restore, it is almost certainly a hardware fault. The TrueDepth camera or its flex cable may have been damaged, even if you don’t see any physical damage.
Common Causes and Misconceptions
One common misconception is that Face ID stops working because the phone “forgot” your face after a reboot. That is not true – Face ID data is stored in the Secure Enclave and survives restarts. The “not available” error means the system cannot communicate with the hardware at all.
Another misconception is that a screen protector or a thick case can cause this error. While a protector can block the camera lens and cause recognition failures, it rarely causes the “not available” message. That message usually means the hardware itself is not responding.
Physical damage is the leading cause of a persistent “not available” error. A drop can loosen the ribbon cable connecting the TrueDepth camera to the logic board. Even if the front camera still works for photos, the dot projector or infrared camera may have failed.
Hardware Repair Options
If you have ruled out software issues, the next step is professional repair. Apple’s official service can diagnose the TrueDepth camera and replace it if needed. Third-party repair shops may offer lower prices, but they often cannot restore Face ID functionality because the dot projector is paired to the original logic board. On iPhone X, replacing the front camera or dot projector without the original pairing usually leaves Face ID permanently disabled.
If your iPhone X is still under AppleCare+ or within the one-year warranty, the repair may be covered. If not, you will pay for the part and labor. Before approving any repair, ask the technician whether Face ID will work after the replacement. Some shops will tell you upfront that they cannot fix Face ID, only the camera.
Alternatives When Face ID Is Unavailable
While Face ID is disabled, you can still use your iPhone X with a passcode. Go to Settings > Face ID & Passcode and make sure “Require Passcode” is set to a short interval, like “Immediately,” so you don’t have to enter it constantly. You can also disable Face ID for specific features like Apple Pay or App Store purchases, but those features will simply ask for your passcode instead.
If you rely on Face ID for password autofill, you can turn on Settings > Passwords & Accounts > AutoFill Passwords and use a third-party password manager that supports fingerprint or passcode unlock. This is a workaround, not a fix, but it keeps your phone usable.
How to Prevent Future Face ID Errors
- Always use a case that has a proper cutout for the TrueDepth camera area.
- Avoid exposing the phone to extreme heat or cold, which can damage the infrared components.
- Do not clean the top of the screen with abrasive materials or alcohol wipes.
- Keep the phone away from water and dust, even though the iPhone X is IP67 rated.
- Install iOS updates promptly – Apple frequently patches Face ID software bugs.
If you drop the phone, check Face ID immediately. If it works, fine. If it shows the error, do not try to open the phone yourself – the TrueDepth camera is delicate and easy to damage further.
Frequently Asked Questions
Will a factory reset fix Face ID?
Sometimes. A factory reset (erase all content and settings) reinstalls iOS and clears corrupted system files. If the error is software-related, it will fix it. If the error persists after a clean restore, the hardware is the problem.
Can I replace the front camera myself to fix Face ID?
No. The TrueDepth camera is paired to the logic board, and replacing it without the original pairing will leave Face ID disabled. Even if you install a genuine Apple part, the phone will not activate Face ID unless the part is programmed by Apple’s service system.
Does a cracked screen cause Face ID to stop working?
Yes, it can. The display assembly includes the front camera and dot projector. If the screen is cracked, the flex cables may be damaged, or the dot projector may be misaligned. A screen replacement can sometimes restore Face ID if the original TrueDepth camera is reused, but not always.
Why does Face ID work after a restart but fail later?
If Face ID works right after a restart but then shows “not available” later, it usually means the hardware is failing intermittently. The phone detects a hardware error and disables Face ID for security. This often gets worse over time, so you should schedule a repair.
Is there a way to bypass Face ID without a passcode?
No. If Face ID is unavailable, you must use your passcode. There is no legitimate way to bypass it, and attempting to do so would compromise the security of the device.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Schedule Tweets on X (Twitter) Web App
- macOS Sierra USB Installer: How to Make One
- Fix System PTE Misuse BSOD on Windows
- PlayStation Games Still Physical After Store Closures
- Fix Standby Mode Not Working on iPhone
- Madden 19 Crashing on PC: Fixed