If you see the error “Failed to load hardware monitor driver,” it usually means your system monitoring software cannot access the low-level drivers it needs to read temperatures, fan speeds, or voltages. The fix is to reinstall the monitoring tool with administrator rights, update or replace the driver, or disable conflicting security software that blocks it.
What Causes This Error
Hardware monitoring programs like HWiNFO, SpeedFan, or motherboard vendor utilities rely on a kernel-level driver to communicate with the system’s Super I/O chip or embedded controller. When that driver fails to load, the program cannot read sensor data. Common triggers include:
- Outdated or corrupted driver files after a Windows update
- Security software (antivirus, anti-ransomware) blocking the driver as suspicious
- Running the monitoring tool without administrator privileges
- Conflicts with another monitoring utility that already loaded a driver for the same hardware
- Driver signature enforcement rejecting an unsigned or self-signed driver
Step-by-Step Fix
- Run the program as administrator. Right-click the monitoring tool’s shortcut and select Run as administrator. Many monitoring drivers require elevated privileges to load.
- Reinstall the monitoring software. Uninstall the program completely, restart your PC, then download the latest version from the official website and install it with administrator rights.
- Check your antivirus quarantine. Open your security software’s quarantine or blocked history and restore any files related to the monitoring tool or its driver (often named
NtDriver.sys,HWiNFO64A.SYS, or similar). - Update or reinstall the chipset driver. Go to your motherboard manufacturer’s support page, download the latest chipset drivers, and install them. A stale chipset driver can prevent the monitoring driver from accessing the Super I/O chip.
- Disable driver signature enforcement temporarily. If you are using an older tool that has an unsigned driver, you can boot into Advanced Startup, choose Disable driver signature enforcement, and then load the driver. This is not a permanent fix—you will need to repeat it each boot or replace the tool.
- Remove conflicting monitoring tools. If you have more than one hardware monitor installed, uninstall all but one. Two tools trying to access the same sensor chip can cause the driver load failure.
Why the Driver Fails on Windows 10 and 11
Modern Windows versions enforce driver signature requirements and Memory Integrity (a core isolation feature) that can block drivers that do not meet Microsoft’s standards. If your monitoring tool is older and its driver is not properly signed, Windows may silently refuse to load it. Additionally, Microsoft’s Vulnerable Driver Blocklist, enabled by default on Windows 11, can block drivers that are known to be exploitable. In such cases, updating the monitoring software is the only reliable fix—older versions may never work again on current Windows builds.
What to Do If the Error Persists
If you still see the error after reinstalling and checking security settings, try these advanced steps:
- Use Device Manager to check for hidden devices. Open Device Manager, click View > Show hidden devices, expand Non-Plug and Play Drivers, and look for the monitoring driver. If it is marked with a yellow warning, uninstall it and restart.
- Run a system file check. Open Command Prompt as administrator and run
sfc /scannowto repair corrupted Windows system files that might interfere with driver loading. - Check the Windows Event Viewer. Look under Windows Logs > System for errors with source Kernel-PnP or Service Control Manager around the time the error appears. The event details often name the specific driver file that failed.
- Try a portable version of the monitoring tool. Some tools offer a portable (no-install) version that loads the driver in a different way and may bypass the issue.
Common Misconception: The Driver Is a Hardware Problem
Many users assume the error means their motherboard’s sensor chip is broken. In reality, the driver load failure is almost always a software conflict or permission issue. The hardware itself rarely fails. If you can read sensors in your BIOS/UEFI setup screen (press Del or F2 during boot), the chip is working fine. The problem is entirely in the Windows environment.
Alternatives to Third-Party Monitoring Tools
If you cannot get a third-party tool to work, you still have options:
- BIOS/UEFI hardware monitor. Most motherboards show CPU temperature, fan speeds, and voltages in the BIOS. This is the most reliable source, though not accessible while the OS is running.
- Windows Task Manager. It shows CPU and GPU usage, but not temperatures or fan speeds.
- Windows Performance Monitor. You can add counters for temperature if your hardware exposes them, but this is rare and requires configuration.
- Manufacturer-specific software. If your motherboard vendor provides its own monitoring utility, try that instead of a generic tool. It is more likely to have a signed driver that works with your specific hardware.
Frequently Asked Questions
Why does the error appear only after a Windows update?
Windows updates can change driver signature policies, update the vulnerable driver blocklist, or reset security settings. If the monitoring tool’s driver was already marginal, the update can tip it into failure. Reinstalling the latest version of the monitoring software usually resolves it.
Can I ignore this error and still use the program?
No. Without the driver, the program cannot read any sensor data. You will see zeros or stale values. Ignoring it means you are not actually monitoring your hardware, which defeats the purpose.
Is it safe to disable driver signature enforcement to fix this?
Disabling driver signature enforcement weakens Windows security and makes your system more vulnerable to malicious drivers. Only do this temporarily for a trusted, well-known tool. If the tool needs this workaround, consider switching to a modern alternative that has a properly signed driver.
Does this error affect gaming performance?
No. The driver only reads sensor data; it does not affect CPU or GPU performance. You can continue gaming, but you will not have real-time temperature or fan speed monitoring until the issue is fixed.
Why does my antivirus flag the monitoring driver as a threat?
Monitoring drivers access low-level hardware, which is behavior that malware also exhibits. Antivirus programs often use heuristics to flag such drivers as suspicious. Always download monitoring tools from the official vendor website to reduce the risk of false positives.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Record Audio on Mac or PC
- Install LibreOffice 5 on Ubuntu: Step-by-Step
- Ways to Open Task Manager in Windows 11
- How to Fix a Slow and Lagging Windows 10 System
- Fix Dual Boot Option Not Showing on Windows
- Using Third-Party Navigation Apps on iPhone