sodcalculator

10 Tech How-To

Fix High CPU and Memory Usage by mrt.exe

Guide 10-52111 · Updated · Step by step

If you see mrt.exe (Microsoft Windows Malicious Software Removal Tool) consuming high CPU or memory, the fix is usually to let it finish its one-time scan, run it manually with a specific scope, or remove it if it runs repeatedly. This article explains why mrt.exe spikes, how to control it, and when to take action.

What Is mrt.exe?

mrt.exe is the executable for the Microsoft Windows Malicious Software Removal Tool (MSRT). It is a standalone malware scanner that Microsoft distributes through Windows Update, typically on the second Tuesday of each month (Patch Tuesday). Unlike Microsoft Defender, MSRT is not a real-time protection agent; it runs once after installation, checks for a specific list of prevalent malware families, and then exits. The tool is signed by Microsoft and is generally safe, but its scanning process can briefly use significant CPU and memory, especially on older hardware or large drives.

Why Does mrt.exe Use High CPU and Memory?

High resource usage from mrt.exe is usually temporary and tied to the scanning job. The tool loads a large signature database into memory, enumerates all files and running processes, and performs pattern matching. On a typical modern PC, this takes 10–30 minutes and may show CPU usage of 50–100% on one core, plus 200–500 MB of RAM. If you see mrt.exe running for hours or constantly, something else is likely wrong: a corrupted update, a conflicting security tool, or a scheduled task that is misconfigured.

How to Check if mrt.exe Is Legitimate

Before killing or deleting anything, verify the file is the real Microsoft tool. Malware sometimes disguises itself with a similar name (e.g., mrt.exe in a non-standard folder). Check the file location and signature:

  • Open Task Manager (Ctrl+Shift+Esc) and find the mrt.exe process.
  • Right-click it and select “Open file location.” The legitimate file is in C:\Windows\System32\mrt.exe (or C:\Windows\SysWOW64\ on 64-bit systems for the 32-bit version).
  • If it is anywhere else (e.g., C:\Users\...\AppData), treat it as suspicious.
  • Right-click the file in Explorer, go to Properties → Digital Signatures, and confirm it is signed by “Microsoft Corporation.”

If the file is not in System32 or lacks a valid Microsoft signature, run a full scan with Microsoft Defender or another reputable antivirus and remove the file.

How to Stop mrt.exe From Using Too Many Resources

If the file is legitimate and the spike is temporary, the simplest fix is to wait. However, if you need to reduce the impact or stop it from running repeatedly, use one of these methods:

  1. Let it finish: Do not force-kill it during a scan unless the system is unresponsive. Interrupting can leave the tool in a bad state and cause it to re-run on next boot.
  2. Run it manually with a narrow scope: Open an elevated Command Prompt (Run as administrator) and type mrt.exe /Q for a quick scan, or mrt.exe /F for a full scan. The /Q option uses less CPU and memory because it checks only running processes and common locations, not the entire disk.
  3. Uninstall the tool via Windows Update: MSRT is delivered as a Windows Update (KB number varies). If you do not want it to install automatically, you can hide the update in Windows Update settings, but note that Microsoft recommends keeping it for protection.
  4. Disable the scheduled task (advanced): The tool is often triggered by a scheduled task named “​Microsoft Windows Malicious Software Removal Tool”. You can disable it in Task Scheduler, but this is not recommended because it removes an extra layer of scanning.

What to Do If mrt.exe Runs Constantly

If mrt.exe appears every day or stays active for hours, try these steps in order:

  • Run sfc /scannow in an elevated Command Prompt to repair system files.
  • Check for pending Windows Updates; a failed MSRT update can cause repeated attempts.
  • Run a full Microsoft Defender scan to rule out an infection that mrt.exe is repeatedly detecting and trying to clean.
  • Check if you have a third-party antivirus. Some security suites conflict with MSRT and cause it to loop.
  • If the issue persists, download the latest MSRT from Microsoft’s official download center and run it manually. This replaces the old version.

Comparison: mrt.exe vs. Microsoft Defender

Many users confuse mrt.exe with Microsoft Defender (MsMpEng.exe). They are separate tools:

  • mrt.exe – on-demand scanner, runs once after installation, focuses on a specific list of prevalent malware, no real-time protection.
  • MsMpEng.exe – the Defender service, runs continuously, provides real-time protection, automatic updates, and uses a more sophisticated engine.

If you see high CPU from MsMpEng.exe instead, the fix is different: you can adjust Defender’s scan schedule, exclude large files, or add exclusions for trusted folders.

Is It Safe to Delete mrt.exe?

Deleting mrt.exe from System32 is not recommended. The file is a legitimate Microsoft component, and removing it may cause Windows Update to reinstall it repeatedly. If you want to stop it from running, the proper method is to uninstall the specific update via Control Panel → Programs → View Installed Updates, or to disable the scheduled task. However, keep in mind that MSRT is an extra safety net; removing it reduces your protection against a small set of malware families.

Frequently Asked Questions

Why does mrt.exe run every time I start Windows?

MSRT is designed to run once after installation, but if the update is not fully applied or the tool detects an issue, it may re-run on subsequent boots. Check Windows Update for errors, and run the tool manually to see if it completes successfully.

Can I stop mrt.exe from running in the background?

Yes, you can disable the scheduled task or uninstall the update, but it is not advisable. The tool runs infrequently and uses resources only during the scan. If it is causing problems, try running a quick scan manually first.

Is mrt.exe a virus?

No, the legitimate mrt.exe is a Microsoft-signed tool. However, malware can use the same filename. Always check the file path and digital signature before assuming it is safe.

How long does mrt.exe take to finish?

On a typical system, a quick scan takes 5–15 minutes, and a full scan can take 30 minutes to an hour or more, depending on drive size and speed. If it runs for hours, something is wrong.

What happens if I kill mrt.exe during a scan?

You may interrupt the scan, and the tool might not clean a detected infection. In some cases, it may re-run on next boot. It is better to let it finish or restart the system and run it again.

Does mrt.exe need to be updated separately?

No, it updates automatically via Windows Update. You can also download the latest version manually from Microsoft’s website if you suspect the installed version is outdated.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →