sodcalculator

10 Tech How-To

Fix HP LaserJet Pro 400 Driver Issues in Windows

Guide 10-56601 · Updated · Step by step

If your HP LaserJet Pro 400 printer is showing errors, not printing, or disappearing from Windows, the problem is almost always a corrupted, outdated, or incompatible driver. The fix is to reinstall the driver cleanly—either through Windows Update or by downloading the full driver package from HP’s support site—and then ensure the print spooler service is running correctly.

Why Driver Issues Happen

Windows 10 and Windows 11 push driver updates automatically, but that convenience has a downside. A Windows Update–delivered driver can overwrite the HP-specific software you installed, breaking features like duplex printing, scan-to-PC, or the status monitor. Other common triggers include:

  • Interrupted installation (power loss, USB cable pulled mid-setup)
  • Leftover files from a previous printer driver that conflict with the new one
  • Corrupted print spooler data after a crash or forced shutdown
  • Windows feature updates that reset printer settings

The HP LaserJet Pro 400 series includes the M401 and M402 models, which share the same basic driver architecture. HP provides two driver types: a “basic” driver that works with Windows’ built-in printing system, and a “full feature” driver that adds the HP Toolbox, scan utilities, and fax support. Most driver issues stem from mixing these two or from Windows replacing one with the other.

Step 1: Run the HP Print and Scan Doctor

Before manually uninstalling anything, use HP’s free diagnostic tool. It automates the most common repairs and can often fix the problem in one pass.

  1. Go to HP’s support website and search for “HP Print and Scan Doctor” (it works for all HP printers, not just the 400 series).
  2. Download and run the tool. It will detect your printer, check the driver, and attempt repairs.
  3. If it finds an issue, follow the on-screen prompts. It may reinstall the driver or reset the spooler.
  4. After it finishes, try printing a test page.

If the tool says everything is fine but the printer still won’t print, move to the manual uninstall.

Step 2: Uninstall the Driver Completely

A partial uninstall leaves behind registry entries and driver files that cause the same error to return. You need to remove every trace.

  1. Open Settings > Devices > Printers & scanners.
  2. Click your HP LaserJet Pro 400, then click Remove device.
  3. Open Control Panel > Programs and Features. Look for any HP LaserJet Pro 400 entries (like “HP LaserJet Pro M401 Driver”) and uninstall them.
  4. Restart your PC. This clears the print spooler’s cached files.

If you want to be extra thorough, you can also stop the print spooler service manually:

  1. Press Win + R, type services.msc, and press Enter.
  2. Find Print Spooler, right-click it, and choose Stop.
  3. Open File Explorer and delete everything in C:\Windows\System32\spool\PRINTERS.
  4. Go back to services.msc, right-click Print Spooler, and choose Start.

This clears stuck print jobs that can make the driver appear broken even when it isn’t.

Step 3: Reinstall the Correct Driver

You have two reliable options. For most people, the full driver from HP is best because it includes all the printer’s features.

  • Windows Update driver: Go to Settings > Devices > Printers & scanners, click Add a printer, and let Windows search. It will install a basic driver automatically. This works if you only need basic printing.
  • HP full driver: Visit HP’s support website, search for “LaserJet Pro 400,” and download the “Full Feature Software” for your exact model (M401 or M402) and your Windows version (10 or 11, 32-bit or 64-bit). Run the installer and choose USB or Network connection when prompted.

If you choose the full driver, make sure your printer is connected and turned on before starting the installer. The installer will detect it and set up the port automatically. For network printers, you may need to enter the printer’s IP address—find it by printing a configuration page from the printer’s control panel (usually under “Reports” or “Information”).

Step 4: Check the Port and Printer Status

Sometimes the driver is fine, but Windows is sending jobs to the wrong port. This happens often after a network change (new router, new Wi-Fi password) or if you switch from USB to network.

  1. Open Settings > Devices > Printers & scanners.
  2. Click your printer, then click Manage > Printer properties.
  3. Click the Ports tab. Look for a checkmark next to a port that matches your connection:
    • USB: something like “USB001” or “DOT4_001”
    • Network: a “Standard TCP/IP Port” with your printer’s IP address
  4. If the wrong port is selected, click the correct one and click Apply.

Also check the printer’s status. In the same Printers & scanners window, your printer should say “Ready.” If it says “Offline” or “Paused,” click Open queue and clear any stuck jobs, then right-click the printer and uncheck “Pause printing” and “Use Printer Offline” if they’re enabled.

Common Problems and Their Specific Fixes

Here are the exact error messages you might see and what to do for each:

  • “Driver is unavailable” – This means Windows lost the driver files. Reinstall using the full HP driver, not the Windows Update one.
  • “Printer offline” – Check the printer’s display for errors (paper jam, open door). Then run the Print and Scan Doctor, which will reset the offline status.
  • “Cannot communicate with printer” – For USB, try a different cable or port. For network, verify the printer’s IP address hasn’t changed by printing a network configuration page.
  • Print jobs stuck in queue – Clear the spooler as described in Step 2. If jobs keep getting stuck, your driver may be corrupted—reinstall it.
  • Scanning not working – The scan function uses a separate driver. Reinstall the full feature software, and make sure you’re using the HP Scan application, not Windows Fax and Scan.

Preventing Future Driver Issues

Once you have a working driver, you can reduce the chances of it breaking again:

  • Don’t install both the basic and full driver – They conflict. Stick with one.
  • Pause Windows driver updates for printers – In Windows Update settings, you can choose to pause updates for a few weeks, but you can’t permanently block a specific driver. If a Windows Update breaks your printer, uninstall the update via Settings > Update & Security > View update history.
  • Keep the printer’s firmware updated – HP occasionally releases firmware fixes that improve Windows compatibility. Check HP’s support site for firmware updates.
  • Use a static IP address for network printers – If your printer uses DHCP, its IP can change, which breaks the port. Set a reserved IP in your router’s settings or assign a static IP on the printer itself.

Frequently Asked Questions

Why does my HP LaserJet Pro 400 keep going offline?

This is usually a communication issue. For network printers, the IP address may have changed or the printer’s sleep mode is too aggressive. Try disabling sleep mode in the printer’s energy settings, or assign a static IP. For USB printers, try a different USB port and make sure the cable is firmly connected.

Can I use the Windows built-in driver instead of HP’s?

Yes, the basic Windows driver will print, but you lose features like duplex printing, scan-to-PC, and the HP Toolbox. If you only need plain printing, the Windows driver is fine and less likely to cause conflicts. If you need scanning or advanced print settings, install the full HP driver.

Will reinstalling the driver erase my printer settings?

No. Your printer’s internal settings (like network configuration and default paper size) are stored on the printer itself, not in the driver. Reinstalling the driver only affects how Windows communicates with the printer. You may need to reconfigure your default print preferences (like duplex or color) in Windows after reinstalling.

My printer worked before a Windows update. How do I roll back the driver?

Go to Settings > Devices > Printers & scanners, click your printer, then Manage > Printer properties > Advanced tab. Click New Driver to reinstall, or use Device Manager: right-click the printer under “Print queues,” choose Properties > Driver tab, and click Roll Back Driver if the option is available. If not, uninstall the update from Settings > Update & Security > View update history > Uninstall updates.

Why does the HP driver installer fail halfway through?

This often happens because a previous HP installation is still running in the background. Restart your PC, make sure no HP programs are open, and run the installer as administrator (right-click > Run as administrator). Also, temporarily disable your antivirus during installation—it can block driver files it mistakenly flags.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →