sodcalculator

10 Tech How-To

Fix Huawei P10 Bluetooth Problems: Step-by-Step

Guide 10-58664 · Updated · Step by step

Bluetooth problems on the Huawei P10—like dropped connections, poor audio, or failure to pair—are usually caused by software glitches, cached data, or interference, and most can be fixed in a few minutes without any special tools. This guide walks you through the most effective fixes in order, from quick toggles to deeper resets, so you can get your earbuds, speaker, or car kit working reliably again.

Why Bluetooth Fails on the P10

The P10 runs Android with Huawei’s EMUI skin, which has its own power management and Bluetooth stack. Most connection problems trace back to one of these:

  • Stale cache: The Bluetooth app and system cache accumulate corrupted data over time.
  • Power saving: EMUI aggressively kills background processes, which can disconnect Bluetooth when the screen is off.
  • Interference: Wi-Fi on 2.4 GHz, USB 3.0 ports, or crowded environments can disrupt the 2.4 GHz Bluetooth signal.
  • Outdated software: Older EMUI builds had known Bluetooth bugs that were fixed in later patches.
  • Device-specific glitches: Some car kits and older speakers have compatibility quirks with the P10’s Bluetooth 4.1 chip.

Before diving into fixes, check the basics: make sure Bluetooth is on (swipe down from the top and tap the Bluetooth icon), the other device is in pairing mode, and both are within 10 meters (33 feet) of each other.

Quick Fixes to Try First

These take less than a minute and solve the majority of temporary glitches.

  1. Toggle Bluetooth off and on: Go to Settings > Bluetooth and switch it off, wait 10 seconds, then switch it back on.
  2. Restart the P10: Hold the power button, tap Restart. This clears most software hiccups.
  3. Turn the other device off and on: Power-cycle your earbuds, speaker, or car stereo.
  4. Forget and re-pair: In Settings > Bluetooth, tap the gear icon next to the problematic device, select “Forget,” then pair again from scratch.

If the issue persists, move to the deeper fixes below.

Clear the Bluetooth Cache and Data

Corrupted cache files are a common culprit. Clearing them forces the system to rebuild fresh data.

  1. Go to Settings > Apps > Apps (or “App management”).
  2. Tap the three-dot menu and select Show system processes.
  3. Find Bluetooth (and also Bluetooth MIDI Service if present) and tap it.
  4. Tap Storage, then Clear cache. (Do not tap “Clear data” yet—that will wipe all paired devices.)
  5. Restart the phone and test.

If that doesn’t help, you can also clear the system cache partition (this does not delete personal data):

  1. Power off the phone.
  2. Press and hold Volume Up + Power until the Huawei logo appears, then release.
  3. Use the volume keys to navigate to Wipe cache partition and press Power to select.
  4. Confirm, then choose Reboot system now.

Note: The exact key combo can vary slightly by P10 model (e.g., VTR-L09 vs. VTR-AL00), but Volume Up + Power is standard.

Check Power Settings and App Permissions

EMUI’s battery optimization is a leading cause of Bluetooth disconnects, especially with fitness trackers and smartwatches.

  • Disable battery optimization for Bluetooth-related apps: Go to Settings > Battery > Launch, find the app you use with the Bluetooth device (e.g., Spotify, your watch’s app), and set it to Manage manually with all toggles on (Allow auto-launch, Allow secondary launch, Allow background activity).
  • Turn off “Bluetooth scanning” restrictions: Settings > Security & privacy > Location > Advanced > Bluetooth scanning. Keep it on for stable connections.
  • Disable “Smart battery” or “Ultra power saving” modes: These can throttle Bluetooth. Set the phone to normal performance mode.

Reset Network Settings (and When to Do a Factory Reset)

If cache clears and power tweaks don’t work, resetting network settings is the next step. This clears Wi-Fi, mobile data, and Bluetooth pairings, so you’ll need to re-pair devices afterward.

  1. Go to Settings > System > Reset > Reset network settings.
  2. Enter your PIN/password if prompted, and confirm.
  3. After the reset, re-pair your Bluetooth devices and test.

If the problem persists after a network reset, a full factory reset may be needed. Back up your data first (Settings > System > Backup & reset > Back up). Factory reset is a last resort, but it often resolves stubborn Bluetooth issues that survive other fixes.

Common Bluetooth Problems and Specific Fixes

Dropped Audio or Stuttering

  • Move the phone closer to the device—walls and pockets cause dropouts.
  • Switch Wi-Fi to 5 GHz if your router supports it, or turn off Wi-Fi while using Bluetooth.
  • Disable “HD audio” (AAC) in Bluetooth settings for the device—some P10 units have issues with high-bitrate codecs.

Won’t Pair at All

  • Make sure the other device is in pairing mode (usually holding the power button for 5–10 seconds).
  • Delete the device from the P10’s list and also delete the P10 from the other device’s list if possible.
  • Try pairing while both devices are charging—some devices disable pairing when low on battery.

Car Kit Connects but No Sound

  • Check the car stereo’s audio source—it may be on a different input.
  • In the P10’s Bluetooth settings for the car, make sure both “Phone audio” and “Media audio” are enabled.
  • Some older cars need the phone to be set as the “audio source” in the car’s menu.

Software Updates and Compatibility

Huawei released several EMUI updates for the P10 that fixed Bluetooth bugs. To check for updates: Settings > System > Software update. If an update is available, install it and test Bluetooth afterward.

Also, some Bluetooth devices (especially cheap earbuds) use outdated firmware that conflicts with the P10. Check the manufacturer’s site for firmware updates for the accessory. If you’ve tried everything and the issue only occurs with one specific device, it’s likely a compatibility issue rather than a phone-wide problem.

Frequently Asked Questions

Why does my Huawei P10 keep disconnecting from my car?

This is often due to EMUI’s power management killing the Bluetooth service when the screen is off. Disable battery optimization for the Bluetooth app and the app you use for calls (like Phone or your music app). Also, try resetting network settings, as car kits can be sensitive to corrupted pairing data.

How do I clear the Bluetooth cache on Huawei P10?

Go to Settings > Apps > Apps > tap the three-dot menu > Show system processes > find Bluetooth > Storage > Clear cache. Do not clear data unless you want to remove all paired devices. Then restart the phone.

Will a factory reset fix Bluetooth on my P10?

It can, if the issue is caused by a corrupted system file or app conflict that persists through other resets. Back up your data first, then go to Settings > System > Reset > Factory data reset. After the reset, test Bluetooth before restoring apps—if it works, reinstall apps gradually to find the culprit.

Can I use Bluetooth and Wi-Fi at the same time on the P10?

Yes, but both use the 2.4 GHz band, so interference is possible. If you experience dropouts, switch your Wi-Fi router to 5 GHz (if available) or turn off Wi-Fi when using Bluetooth. The P10 supports dual-band Wi-Fi, so 5 GHz is the better choice for streaming while using Bluetooth.

Why is my P10 Bluetooth audio low volume?

This is often caused by the “Absolute volume” setting. In Settings > Bluetooth, tap the gear next to your device and enable “Media audio sync” if available. Also, check if the device has its own volume control that’s set low. Some users report that disabling HD audio (AAC) increases volume on certain speakers.

Is the Huawei P10 Bluetooth 5.0?

No, the P10 uses Bluetooth 4.1. It supports basic audio and data profiles but lacks the range and bandwidth of Bluetooth 5.0. This means you may experience more dropouts at longer distances, but it should still work reliably within 10 meters.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →