sodcalculator

10 Tech How-To

Fix iPad Constantly Rebooting: Step-by-Step Guide

Guide 10-57917 · Updated · Step by step

If your iPad is stuck in a reboot loop, the fix usually involves a forced restart, updating iOS, or restoring via a computer. This guide walks you through the most effective troubleshooting steps, from simple restarts to a full system restore, so you can get your device stable again.

Why Your iPad Keeps Rebooting

An iPad that repeatedly turns off and on is often caused by a software glitch, a problematic app, or a failing battery. Less commonly, it can be a hardware fault. The reboot loop happens when iOS crashes during startup, tries to recover, and crashes again. Understanding the root cause helps you choose the right fix.

Common triggers include:

  • A recent iOS update that didn’t install correctly.
  • An app that is incompatible with your current iOS version.
  • Low storage space, which can cause system instability.
  • A corrupted settings file or cache.
  • Battery health degradation, especially on older iPads.

Start with a Forced Restart

A forced restart is different from a normal restart and can clear temporary glitches without erasing data. It’s the first thing to try because it’s quick and safe.

  1. For iPads with Face ID or Touch ID on the top button: Press and quickly release the Volume Up button, then the Volume Down button. Next, press and hold the top (or side) button until the Apple logo appears, then release.
  2. For iPads with a Home button: Press and hold both the Home button and the top (or side) button simultaneously until the Apple logo appears, then release.

If the forced restart works, your iPad should boot normally. If it still reboots, move on to the next steps.

Update iOS or Restore via Computer

If a forced restart doesn’t help, the issue is likely deeper in the software. Updating iOS can replace corrupted system files, while restoring wipes the device and installs a fresh copy.

  1. Update without erasing: Connect your iPad to a computer with the latest version of Finder (macOS Catalina or later) or iTunes (Windows or older macOS). Select your device, then choose “Check for Update.” If an update is available, install it. This keeps your data intact.
  2. Restore (erases all data): If updating fails or doesn’t fix the loop, put your iPad into Recovery Mode (see below) and choose “Restore” in Finder or iTunes. This will download the latest iOS and install it cleanly.
  3. Use Recovery Mode: With your iPad connected, force restart it but keep holding the button after the Apple logo appears until you see the “Connect to computer” screen. Then follow the prompts in Finder/iTunes.

Make sure you have a recent backup before restoring, as this process erases all content and settings.

Check for Problematic Apps and Storage

Sometimes a single app can cause the reboot loop, especially if it’s poorly optimized or conflicts with iOS. Also, low storage can prevent the system from writing necessary temporary files.

  • Boot into Safe Mode (if possible): On iPads, there is no easy safe mode, but you can try uninstalling recently installed apps. If the reboots started after installing a specific app, delete that app first.
  • Free up storage: Go to Settings > General > iPad Storage. If the bar is nearly full, delete unused apps, photos, or videos. Aim for at least 2-3 GB of free space.
  • Reset all settings: Go to Settings > General > Transfer or Reset iPad > Reset > Reset All Settings. This doesn’t delete your data but resets Wi-Fi passwords, wallpapers, and other preferences.

Battery and Hardware Issues

If software fixes don’t stop the rebooting, the battery may be failing. A degraded battery can cause sudden power drops, leading to a loop. You can check battery health in Settings > Battery > Battery Health (on supported models). If it’s below 80% or shows “Service,” the battery may need replacement.

Other hardware issues, like a loose internal connection or damaged logic board, are less common but possible. If your iPad is under warranty, contact Apple Support. If not, consider a reputable repair service. Avoid opening the device yourself unless you have experience, as it can cause further damage.

When to Restore as New

If you’ve tried updating, resetting settings, and checking storage, but the loop persists, a full restore as new (without restoring from backup) is the last software resort. This eliminates any corrupted data that might be carried over from a backup.

  1. Back up any important data to iCloud or a computer (if possible).
  2. Connect your iPad to a computer and put it in Recovery Mode.
  3. Choose “Restore” and wait for the process to complete.
  4. Set up your iPad as new, then test if the rebooting stops.
  5. If it works, restore your data from the backup. If the loop returns after restoring, the backup itself is corrupted, and you’ll need to set up as new and manually re-add data.

Frequently Asked Questions

Will I lose my data if I force restart my iPad?

No, a forced restart is safe and does not erase any data. It only interrupts the current power cycle, similar to pulling the plug on a desktop computer. Your apps, photos, and settings remain intact.

How do I put my iPad in Recovery Mode?

Connect your iPad to a computer, then force restart it but keep holding the button after the Apple logo appears. Keep holding until you see the “Connect to computer” screen. Then, in Finder or iTunes, you’ll see options to Update or Restore.

What if my iPad is too old to update to the latest iOS?

If your iPad doesn’t support the latest iOS, you can still try restoring it to the newest version it supports. If that doesn’t fix the loop, the hardware may be too old or failing, and a replacement might be more cost-effective.

Can a faulty charging cable cause rebooting?

Yes, a damaged cable or charger can cause power fluctuations, which might trigger reboots. Try using a different Apple-certified cable and charger to rule this out. Also, check the charging port for debris.

Should I try a third-party repair shop?

Only after exhausting all software options and if the device is out of warranty. Look for a shop with good reviews and ask about their warranty on repairs. For battery or logic board issues, Apple’s official service is generally more reliable.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →