If your iPad won’t turn off, the fix is usually a forced restart or a Settings change, not a hardware failure. This guide walks you through the exact steps to power down any iPad model, plus what to do when the screen is frozen, the button is stuck, or the device keeps restarting on its own.
Why Your iPad Won’t Turn Off
An iPad that ignores the power button is almost always stuck in a software state, not broken. The most common causes are:
- Unresponsive app or system process – a background app can hang and block the shutdown dialog.
- Screen or digitizer glitch – the display registers touches incorrectly, so the “slide to power off” slider never gets a clean swipe.
- Stuck physical button – the top button may be mechanically pressed down, or a case is pressing it.
- Software update in progress – the iPad may be installing an update in the background and ignores shutdown requests until it finishes.
- Accessibility settings – features like Touch Accommodations or Switch Control can interfere with button presses.
None of these mean the iPad is permanently damaged. In nearly every case, a forced restart or a Settings toggle will bring the power menu back.
First, Try the Normal Shutdown (Again)
Before jumping to forced restarts, give the standard method one more careful attempt. On iPads with a Home button (iPad 6th gen and earlier, iPad mini 5 and earlier, iPad Air 2 and earlier), press and hold the top button until “slide to power off” appears. On Face ID iPads (iPad Pro 2018 and later, iPad Air 4th gen and later, iPad mini 6th gen), press and hold the top button and either volume button simultaneously until the slider appears.
If the slider appears but you can’t drag it, try these quick checks:
- Remove any case or screen protector that might be covering the edges.
- Clean the screen with a soft, dry cloth – oil or debris can make the slider unresponsive.
- Tap the slider instead of swiping – sometimes a tap works when a swipe doesn’t.
If the slider never appears, move to the forced restart below.
Force Restart: The Most Reliable Fix
A forced restart is different from a normal restart – it bypasses the software shutdown process and directly resets the hardware. It does not erase any data. The steps depend on your iPad model:
- iPads with a Home button: press and hold both the top button and the Home button simultaneously. Keep holding for at least 10 seconds until the Apple logo appears, then release.
- iPads with Face ID (no Home button): press and quickly release the volume-up button, then press and quickly release the volume-down button, then press and hold the top button. Keep holding until the Apple logo appears, then release.
After the Apple logo appears, the iPad will boot up normally. Then try the standard shutdown again – it should work now. If the iPad still won’t turn off after a forced restart, the problem is likely a Settings issue or a stuck button.
Check for a Stuck Button or Case Issue
A physically stuck top button is more common than you’d think. If the button feels mushy or doesn’t click when pressed, it may be held down internally. Try these steps:
- Remove the iPad from any case or folio – many cases have a rigid edge that can press the button.
- Gently tap the top button a few times to see if it springs back.
- If the button is visibly damaged or recessed, you may need service – but first, try the Settings-based shutdown below, which doesn’t require the button at all.
If the button is fine but the iPad still ignores shutdown, the next step is to use Settings to turn it off.
Shut Down from Settings (No Buttons Needed)
This method works on any iPad running iPadOS 15 or later and completely bypasses the physical buttons:
- Open Settings.
- Tap General.
- Scroll to the bottom and tap Shut Down.
- Drag the power-off slider that appears.
If the slider still doesn’t respond, try enabling AssistiveTouch (Settings → Accessibility → Touch → AssistiveTouch). Then go to Device → More → Restart from the AssistiveTouch menu. This sends a software restart command that often works when the physical button doesn’t.
What to Do If the iPad Keeps Turning Itself Back On
Sometimes the iPad does shut down, but immediately boots back up on its own. This usually points to one of these:
- Charging cable or accessory – unplug everything, including the charger and any connected accessories. A faulty cable can send a “wake” signal.
- Software update pending – go to Settings → General → Software Update and install any pending update. A partially downloaded update can cause boot loops.
- Battery health – if the battery is very low or degraded, the iPad may shut down and restart repeatedly. Try charging it to at least 50% for an hour, then attempt shutdown again.
If the iPad still won’t stay off after these checks, the next step is to restore the software via a computer.
Restore as a Last Resort
If none of the above works, a software restore will clear out whatever is blocking shutdown. This erases all data, so back up first if possible. You’ll need a computer with the latest version of iTunes (Windows) or Finder (macOS Catalina or later):
- Connect the iPad to the computer with a cable.
- Put the iPad into recovery mode: for Home-button iPads, hold top + Home; for Face ID iPads, press volume up, volume down, then hold top – keep holding until the recovery mode screen appears.
- On the computer, choose Restore when prompted.
If the iPad doesn’t enter recovery mode on the first try, repeat the button sequence. After the restore completes, set up the iPad as new and test the shutdown function. If it still fails after a clean restore, the issue is likely hardware – contact Apple Support or an authorized repair provider.
Frequently Asked Questions
Will a forced restart delete my data?
No. A forced restart is the same as pulling the plug on a desktop computer – it interrupts the current session but does not erase any files, apps, or settings. Your data remains intact.
Why does my iPad turn off but then turn back on immediately?
This is usually caused by a connected charger or accessory sending a wake signal, a pending software update, or a low battery. Unplug everything, charge to at least 50%, and try again. If it persists, restore via a computer.
Can I turn off an iPad with a broken power button?
Yes. Use Settings → General → Shut Down, or enable AssistiveTouch and use its Restart option. Both bypass the physical button entirely.
How long should I hold the buttons for a forced restart?
Hold for at least 10 seconds, but you may need up to 20 seconds on some models. Keep holding until the Apple logo appears – if you release too early, nothing happens.
My iPad is frozen and won’t respond to anything. What should I do?
Do a forced restart using the model-specific button sequence. This is the only reliable way to recover a completely frozen iPad. If it still doesn’t respond, connect to a computer and try recovery mode.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Enable Privacy Indicators on Chromebook
- How to Calculate Taxes on Overtime Pay
- VPN Not Working on iPhone? Fixes That Actually Work
- Hide & Unhide Apps on Samsung Phones
- Fix iOS 17 Keyboard Not Working Properly
- Fix DNS Server Unavailable Error in Windows 11