iPhone Shortcuts automations can stop running silently—no notification, no action, just nothing. This guide covers the most common causes and the exact settings to check to get them working again, from toggling “Ask Before Running” to re-creating the automation.
Why Automations Stop Working
Shortcuts automations are event-triggered actions that run when a condition is met (time of day, location, Wi-Fi connection, battery level, etc.). They differ from regular shortcuts because they require the Shortcuts app to be installed and, for many triggers, your iPhone to be awake and unlocked. A single misconfigured toggle or a stale automation can cause the whole thing to fail silently.
Quick Checklist Before You Dig In
- Make sure Shortcuts is updated in the App Store.
- Confirm your iPhone is running a recent iOS version (automations changed a lot in iOS 16 and 17).
- Ensure you’re signed into iCloud with the same Apple ID on all devices where the automation might run.
- Restart your iPhone—it clears temporary glitches that can block automation triggers.
Fix 1: Turn Off “Ask Before Running”
The most common reason an automation appears “broken” is that it’s waiting for your confirmation. When you create an automation, the toggle Ask Before Running is on by default for many triggers. If you don’t tap the notification when it appears, the automation never runs.
- Open the Shortcuts app.
- Tap the Automation tab at the bottom.
- Tap the automation that isn’t working.
- Turn off Ask Before Running.
- Tap Done.
Note: Some triggers (like certain location-based ones) may force this toggle on for security reasons—if it’s grayed out, you’ll need to tap the notification manually.
Fix 2: Check the Trigger Conditions
Automations are literal. If your time-based automation is set to “8:00 AM” but your iPhone is in Low Power Mode or the trigger time passes while the phone is locked, it may not fire. Review the trigger settings:
- Time of Day: Make sure AM/PM is correct and the “Repeat” schedule is what you expect.
- Location: Location-based automations require Location Services to be on for Shortcuts (Settings → Privacy & Security → Location Services → Shortcuts). They also only work when the phone is awake enough to detect the region change.
- Wi-Fi/Bluetooth: The phone must actually connect to the network/device. If the network is 5 GHz and the phone connects to a different band, the automation may not trigger.
- Battery Level: If you set “Battery Level Equals 50%” and the phone jumps from 51% to 49% without hitting exactly 50%, it won’t fire. Use “Rises Above 50%” or “Falls Below 50%” instead.
Fix 3: Recreate the Automation
Sometimes an automation becomes corrupted—especially after an iOS update. The fastest fix is to delete it and rebuild it from scratch.
- In the Automation tab, tap the broken automation.
- Scroll to the bottom and tap Delete Automation.
- Tap the + in the top-right to create a new one.
- Choose the same trigger and actions, but this time test it immediately.
If the new one works, the old one was corrupted. If the new one also fails, the problem is likely a system setting (see next).
Fix 4: Allow Notifications for Shortcuts
If you don’t see the “Running” notification, the automation may be running but you can’t tell. Go to Settings → Notifications → Shortcuts and make sure Allow Notifications is on. Also check that the notification style isn’t set to “Deliver Quietly” or “Off” for the Shortcuts app.
Fix 5: Disable Low Power Mode and Focus Modes
Low Power Mode can delay or block background tasks, including automation triggers. If you have a battery-level automation that turns on Low Power Mode, it can create a loop that stops other automations from running. Similarly, Focus modes (Do Not Disturb, Sleep, etc.) can suppress notifications that automations need to confirm or show progress. Temporarily turn off all Focus modes and Low Power Mode to test.
Fix 6: Update iOS and the Shortcuts App
Apple frequently patches automation bugs in iOS updates. Go to Settings → General → Software Update and install any pending update. Also check the App Store for a Shortcuts update—the app is separate from iOS and sometimes gets fixes independently.
Fix 7: Reset All Settings (Last Resort)
If nothing else works, you can reset all settings without losing your data. This will reset Wi-Fi passwords, wallpaper, and notification preferences, but it often clears the underlying glitch that blocks automations.
- Go to Settings → General → Transfer or Reset iPhone → Reset.
- Choose Reset All Settings.
- Enter your passcode and confirm.
After the reset, you’ll need to re-enable Location Services for Shortcuts and re-enter Wi-Fi passwords, but your automations should remain.
Frequently Asked Questions
Why does my automation only work when the phone is unlocked?
Many automations (especially location-based and some network triggers) require the iPhone to be awake and unlocked to evaluate the condition. If the phone is locked and the trigger happens, the automation may be delayed until you unlock it, or it may not run at all. This is a security feature—Apple doesn’t want automations to run silently in the background without your knowledge.
Can I make an automation run without any notification?
Yes, but only for certain triggers. When you turn off Ask Before Running, the automation runs automatically without a confirmation prompt. However, you’ll still see a brief notification in the notification center that it ran. There’s no way to suppress that completely.
Why does my automation run on my iPad but not my iPhone?
Automations are stored per device, not synced via iCloud. If you created an automation on your iPad, it won’t automatically appear on your iPhone. You need to recreate it on each device. Also, some triggers (like cellular data) are iPhone-only.
Do automations work in the background or only when the app is open?
Automations run in the background, but the Shortcuts app doesn’t need to be open. However, the automation engine runs as a system process, so it can be delayed if the phone is heavily loaded or in Low Power Mode. For time-based automations, they generally run on time, but location-based ones may take a few minutes to detect the change.
Why did my automation stop working after an iOS update?
iOS updates can change how automations are handled. Sometimes the update resets permissions or changes the behavior of certain triggers. The most common fix is to toggle the automation off and on, or delete and recreate it. If that doesn’t work, try resetting all settings as described above.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Apps Not Downloading From Play Store
- Secure a Samsung Galaxy After a Zero-Day Disclosure
- What to Check Before Installing Linux Alongside Windows
- Fix OEM Activation Error 0xc004c060 in Windows 10
- Why Does My App Run One Query for the List and One per Item?
- Fix Google Chrome Has Stopped Working