sodcalculator

10 Tech How-To

iPhone Not Turning On: Fixes That Actually Work

Guide 10-57922 · Updated · Step by step

If your iPhone is not turning on, the fix is usually a forced restart, a charge, or a recovery mode restore. This guide walks you through each step in order, from the most likely fix to the last resort, so you can get your phone back on without losing data.

Why Your iPhone Won’t Turn On

An iPhone that appears dead can have several causes, ranging from a drained battery to a software crash to a hardware failure. The most common reasons include:

  • Battery completely drained – especially after a long period of disuse or extreme cold.
  • Software crash or frozen screen – the phone is on but the display is unresponsive.
  • Charging issue – a faulty cable, adapter, or dirty charging port.
  • Hardware failure – a damaged screen, logic board, or battery that needs repair.

Before assuming the worst, work through the steps below. Most dead iPhones are actually fixable at home with nothing more than the right button combination and a bit of patience.

Step 1: Force Restart Your iPhone

A force restart is different from a normal restart. It interrupts the power flow and can clear a software freeze without erasing any data. The button combination depends on your iPhone model.

  1. iPhone 8 or later (including SE 2nd gen and newer): Press and quickly release the Volume Up button, then press and quickly release the Volume Down button, then press and hold the Side button until the Apple logo appears. This can take up to 20 seconds.
  2. iPhone 7 / 7 Plus: Press and hold both the Side button and the Volume Down button until the Apple logo appears.
  3. iPhone 6s or earlier, and SE 1st gen: Press and hold both the Home button and the Top (or Side) button until the Apple logo appears.

If the Apple logo appears, your iPhone is working. If it stays on a black screen, move to the next step.

Step 2: Charge Your iPhone Properly

Sometimes the battery is so low that the screen won’t even show the low-battery icon. Plug your iPhone into a wall outlet (not a computer) using the cable that came with it, and let it charge for at least 15–30 minutes. If the battery was completely flat, it may take a few minutes before the charging icon appears.

While charging, check for these common issues:

  • Dirty charging port: Use a soft, dry toothbrush or a wooden toothpick to gently remove lint or debris. Do not use metal objects.
  • Faulty cable or adapter: Try a different Apple-certified cable and adapter. If the phone charges with another cable, the original was the problem.
  • Extreme temperatures: iPhones are designed to operate between 32°F and 95°F (0°C and 35°C). If the phone is too cold or too hot, it may refuse to charge temporarily.

If your iPhone still shows no sign of life after 30 minutes of charging, try a different outlet and a different cable. If it still doesn’t respond, move to recovery mode.

Step 3: Put Your iPhone in Recovery Mode

Recovery mode is a diagnostic state that allows your iPhone to connect to a computer even when the normal operating system won’t boot. It’s the standard fix for a software crash that prevents startup. You’ll need a computer with the latest version of iTunes (Windows) or Finder (macOS Catalina or later).

  1. Connect your iPhone to the computer with a cable.
  2. On your iPhone, perform the same button sequence as a force restart, but keep holding the buttons even after the Apple logo appears. Keep holding until you see the recovery mode screen – a computer icon with a cable.
  3. On your computer, a dialog will appear offering to Update or Restore. Choose Update first. This reinstalls iOS without erasing your data.
  4. If Update fails or your iPhone still won’t turn on, you may need to choose Restore, which erases all data and reinstalls iOS. Only do this if you have a backup or are prepared to lose data.

If recovery mode doesn’t work, or your iPhone doesn’t enter recovery mode at all, the problem is likely hardware-related.

Step 4: Check for Hardware Damage

If your iPhone has been dropped, exposed to water, or shows physical damage, the issue may be a broken screen, a damaged battery, or a failed logic board. Signs of hardware failure include:

  • Screen is cracked or black – the phone may be on, but the display is dead. Try connecting to a computer and see if it appears in Finder/iTunes. If it does, the screen needs replacement.
  • Phone gets warm but doesn’t turn on – this could indicate a short circuit or battery issue.
  • Water damage – the Liquid Contact Indicator (LCI) inside the SIM card slot turns red. If it’s red, the phone has been in contact with liquid.

In these cases, a professional repair is usually required. Apple or an authorized service provider can diagnose the issue. Avoid opening the phone yourself, as this can void warranty and cause further damage.

Step 5: When to Seek Professional Help

If you’ve tried all the steps above and your iPhone still won’t turn on, it’s time to contact Apple Support or an authorized repair center. Before you do, make sure you have your proof of purchase and any relevant warranty information. If your iPhone is under warranty (usually one year), the repair may be free. If not, you’ll need to pay for the repair, which can vary in cost depending on the model and the issue.

If you have an AppleCare+ plan, it covers accidental damage for a service fee, but not for lost or stolen devices. Always back up your iPhone regularly (via iCloud or a computer) so that even if the device is unrecoverable, your data isn’t lost.

Preventing Future Startup Issues

Once your iPhone is working again, take these steps to reduce the chance of it happening again:

  • Keep iOS updated – Apple regularly releases bug fixes and security patches.
  • Avoid extreme temperatures – don’t leave your iPhone in a hot car or in freezing weather.
  • Use quality charging accessories – cheap, uncertified cables can damage the battery or charging port.
  • Don’t let the battery fully drain often – lithium-ion batteries last longer when kept between 20% and 80%.
  • Back up regularly – so a dead phone doesn’t mean lost photos and contacts.

Frequently Asked Questions

Why is my iPhone showing the Apple logo but not turning on?

This usually means the software is corrupted or the phone is stuck in a boot loop. Try a force restart first. If that doesn’t work, put the iPhone in recovery mode and choose Update. If Update fails, you may need to Restore, which erases data.

How long should I charge a dead iPhone before it turns on?

If the battery is completely drained, it may take 15–30 minutes of charging before the screen shows any sign of life. If it still doesn’t respond after an hour, there’s likely another issue.

Can I fix a water-damaged iPhone that won’t turn on?

Water damage is tricky. Do not attempt to charge it or turn it on, as this can cause a short circuit. Place the iPhone in a dry, well-ventilated area (not in rice) and contact a professional. They can clean the internal components and assess the damage.

Will a factory reset fix my iPhone if it won’t turn on?

No, a factory reset requires the phone to be on and accessible. If your iPhone won’t turn on, you can’t perform a factory reset from the Settings app. Recovery mode’s Restore option is the closest equivalent, but it’s done from a computer.

How do I know if my iPhone is actually on but the screen is broken?

Connect your iPhone to a computer. If it appears in Finder or iTunes, the phone is on. You can also try calling your number – if it rings, the phone is on but the screen is likely broken. In that case, a screen replacement is needed.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →