sodcalculator

10 Tech How-To

iPhone X Boot Loop: How to Fix It

Guide 10-53770 · Updated · Step by step

If your iPhone X is stuck in a boot loop—showing the Apple logo, turning off, and restarting repeatedly—the fix usually involves a force restart, a recovery mode restore, or updating iOS via a computer. This guide walks you through each step in order, from the simplest to the most involved, so you can get your phone working again.

What a Boot Loop Looks Like and Why It Happens

A boot loop is when the iPhone powers on, displays the Apple logo for a few seconds, then shuts down or restarts, over and over. You may never reach the lock screen, or the phone may work for a minute before crashing again. Common causes include a failed iOS update, corrupted system files, a faulty app that launches at startup, low storage, or a hardware issue like a damaged battery or logic board. In many cases, the problem is software-related and can be resolved without replacing the phone.

Before You Start: What You Need

To perform the fixes below, you’ll need:

  • A computer with the latest version of macOS or Windows.
  • The latest version of Finder (on macOS Catalina or later) or iTunes (on Windows or older macOS).
  • A lightning cable that you know works—ideally the one that came with the phone.
  • A stable internet connection, because restoring or updating iOS downloads software from Apple.
  • Your Apple ID password if you plan to restore from a backup or disable Find My iPhone.

Fix 1: Force Restart the iPhone X

A force restart is the first thing to try because it’s quick and often clears a temporary software glitch. Unlike a normal restart, it doesn’t require the screen to be responsive. On the iPhone X, do this:

  1. Press and quickly release the Volume Up button.
  2. Press and quickly release the Volume Down button.
  3. Press and hold the Side button (the one on the right) until you see the Apple logo, then release.

If the phone is in a boot loop, you may need to hold the Side button for longer than usual—up to 20 seconds. If the loop was caused by a minor software hiccup, the phone should boot normally after this. If it doesn’t, move to the next step.

Fix 2: Put the iPhone in Recovery Mode and Restore

If a force restart doesn’t work, the next step is to put the iPhone in recovery mode and restore it. This erases the phone and reinstalls iOS, which fixes most software-related boot loops. Here’s how:

  1. Connect your iPhone to your computer with the lightning cable.
  2. Open Finder (macOS Catalina or later) or iTunes (Windows or older macOS). If you’re asked to trust the computer, do so—but if the phone is in a boot loop, you may not see that prompt.
  3. Force restart your iPhone X using the same button sequence as above, but this time, when you see the Apple logo, keep holding the Side button until you see the recovery mode screen—a computer icon with a lightning cable.
  4. On your computer, a pop-up will appear saying there’s a problem with the iPhone and offering to Update or Restore. Choose Update first. This keeps your data and just reinstalls iOS. If that fails, choose Restore, which erases everything.
  5. Wait for the process to finish. The phone will restart, and you’ll see the “Hello” screen if you restored.

If the phone stays in recovery mode and the restore fails, try a different cable or USB port, and make sure your computer’s software is up to date. If it still fails, you may need to use DFU mode (below).

Fix 3: DFU Mode (Last Software Resort)

DFU (Device Firmware Update) mode is a deeper recovery state that allows your computer to communicate with the iPhone’s hardware without loading the operating system. It’s the last software-level fix before hardware repair. To enter DFU mode on an iPhone X:

  1. Connect the iPhone to your computer and open Finder/iTunes.
  2. Press and quickly release the Volume Up button.
  3. Press and quickly release the Volume Down button.
  4. Press and hold the Side button for 10 seconds.
  5. While still holding the Side button, press and hold the Volume Down button for 5 seconds.
  6. Release the Side button but keep holding Volume Down for another 10 seconds.
  7. If the screen stays completely black, you’re in DFU mode. If you see the Apple logo or the recovery mode screen, you missed it and need to try again.

Once in DFU mode, your computer will show a pop-up. Choose Restore to reinstall iOS. This will erase your phone. If the restore succeeds, your phone should boot normally. If it fails or the phone still loops, the issue is likely hardware-related.

Fix 4: Check for Hardware Issues

If none of the software fixes work, the boot loop may be caused by a hardware problem. Common culprits include:

  • Battery: A severely degraded battery can cause the phone to shut down under load, creating a loop. If your iPhone is older and the battery health was below 80%, this is a possibility.
  • Logic board: A faulty logic board, often due to water damage or physical impact, can prevent the phone from completing its boot sequence.
  • Buttons or sensors: A stuck button or a faulty Face ID sensor can sometimes cause boot issues.

If you suspect hardware, contact Apple Support or visit an authorized service provider. They can run diagnostics and, if needed, replace the faulty part. Be aware that if the phone has water damage, the repair may not be covered by warranty.

What to Do If You Can’t Restore

If restore attempts fail repeatedly, you still have options:

  • Try a different computer—sometimes USB drivers or security software interfere.
  • Try a different lightning cable, preferably an Apple-certified one.
  • Update your computer’s operating system and Finder/iTunes to the latest version.
  • If you have access to another iPhone, you can use the Quick Start feature to set up a new phone and transfer data (if the old phone is still functional enough to use).

Frequently Asked Questions

Will I lose my data if I restore my iPhone?
Yes, restoring erases all data on the iPhone. If you have a recent iCloud or computer backup, you can restore your data after the phone boots normally. If you don’t have a backup, you may lose photos, messages, and other files. That’s why it’s important to try the Update option first, which preserves data.

How long does a boot loop last?
A boot loop can last indefinitely until you intervene. It’s not a temporary state that resolves on its own. The phone will keep restarting until the underlying issue is fixed, so you need to take action.

Can a boot loop be caused by a bad app?
Yes, an app that crashes on launch can sometimes cause a boot loop, especially if it’s a system app or one that runs at startup. However, you usually can’t uninstall the app while the phone is looping, so you’d need to restore the phone and then avoid reinstalling that app.

Is there a way to back up data before restoring?
If your phone is stuck in a boot loop, it’s unlikely you can back it up normally. However, if the phone occasionally boots to the lock screen, you can try to quickly back up to iCloud or your computer before it crashes again. If you can’t, you may need to use third-party data recovery software, but that’s not guaranteed to work.

What’s the difference between recovery mode and DFU mode?
Recovery mode loads a minimal version of iOS that allows your computer to restore or update the phone. DFU mode doesn’t load any software—it just puts the hardware in a state where it can receive a firmware update. DFU is more powerful and can fix issues that recovery mode can’t, but it’s also easier to get wrong.

Why does my iPhone X keep restarting after the Apple logo?
This is the classic boot loop symptom. It usually means iOS is failing to load completely. The cause could be a corrupted update, a software conflict, or hardware failure. Following the steps above—force restart, recovery mode, DFU—will help you determine which.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →