The “Let’s connect you to network” screen appears during Windows 11 installation (or after a reset) and blocks setup until you connect to the internet. This guide explains why it happens and gives you several working fixes, including the built-in command-line bypass and hardware checks.
Why This Screen Appears
Windows 11 Home and Pro editions require an internet connection during the out-of-box experience (OOBE) to verify your Microsoft account and download updates. The setup process checks for a working network interface with internet access. If it can’t find one, or if the network requires a login page (like a hotel or dorm Wi-Fi), the “Let’s connect you to network” screen can get stuck or loop.
Common triggers include:
- Wi-Fi driver not loaded during setup (especially on new PCs or after a clean install).
- Ethernet cable unplugged or faulty.
- Router or modem offline.
- Windows setup bug where the “I don’t have internet” button is missing.
Quick Fix: Use the Command-Line Bypass
This is the most reliable method for skipping the network requirement during setup. It works on current Windows 11 versions (22H2 and later).
- At the “Let’s connect you to network” screen, press Shift + F10 (or Shift + Fn + F10 on some laptops) to open a Command Prompt window.
- Type
oobe\bypassnroand press Enter. The PC will restart and return to the setup screen. - Click I don’t have internet (or Continue with limited setup) when it appears.
- Proceed with a local account instead of a Microsoft account.
If the command doesn’t work, try start ms-cxh:localonly (without quotes) in the same Command Prompt. This opens a local account creation dialog directly.
Check Your Network Hardware
Before assuming it’s a software issue, verify the basics:
- If using Wi-Fi, confirm the router is broadcasting and other devices can connect.
- If using Ethernet, check that the cable is firmly plugged into both the PC and the router.
- Try a different Ethernet port on the router or a different cable.
- Restart the router by unplugging it for 30 seconds, then plugging it back in.
If you’re in a hotel or office, the network might require a captive portal (a browser login page). Windows setup usually can’t handle that, so use the bypass command above and connect later.
Update or Reinstall Network Drivers
If the bypass command works but you still can’t connect after setup, the issue is likely a missing or outdated network driver.
- After finishing setup, open Device Manager (right-click the Start button and select it).
- Expand Network adapters.
- Look for any device with a yellow exclamation mark.
- Right-click the adapter and select Update driver > Search automatically for drivers.
- If Windows doesn’t find one, go to your PC manufacturer’s support website and download the Wi-Fi or Ethernet driver for your exact model.
You can also download the driver on another device, transfer it via USB, and run the installer.
Use Ethernet Instead of Wi-Fi
Wired connections are more stable during setup. If you have a laptop without an Ethernet port, you can use a USB-to-Ethernet adapter. Many users report that plugging in a cable at the “Let’s connect you to network” screen instantly resolves the issue because Windows detects the wired connection automatically.
When the Bypass Command Doesn’t Work
In rare cases, oobe\bypassnro is disabled or doesn’t appear because of a bug. Try these alternatives:
- Press Alt + F4 to close the network window – sometimes this reveals the “I don’t have internet” option.
- Disconnect the Ethernet cable and disable Wi-Fi (via airplane mode or a physical switch) before the setup checks for a network. Then click the back arrow and try again – Windows may show the skip option.
- If you’re reinstalling Windows, create the installation USB again using the official Media Creation Tool. A corrupted USB can cause setup to hang on this screen.
Frequently Asked Questions
Is it safe to skip the internet connection during Windows 11 setup?
Yes. You can finish setup offline and connect later. Windows will still install updates and let you sign in with a Microsoft account afterward. The only downside is that you’ll use a local account during setup, but you can link it later.
Why doesn’t my Wi-Fi show up during setup?
Most likely the Wi-Fi driver isn’t loaded because Windows doesn’t have it in its basic driver set. This is common on new laptops with the latest Wi-Fi 6 or 6E chips. Use the bypass command, finish setup, then install the driver from the manufacturer’s website.
Can I use my phone’s hotspot to get past this screen?
Yes. If your phone has a mobile hotspot, turn it on and connect to it like any Wi-Fi network. This often works when a router is out of range or the main network has issues. Just make sure your phone has a data plan that allows tethering.
What if I don’t have a Microsoft account?
You don’t need one. Use the bypass command and choose “I don’t have internet” to create a local account. You can add a Microsoft account later in Settings > Accounts > Your info.
Will this bypass affect Windows activation?
No. Skipping the network requirement during setup doesn’t affect activation. You still need a valid product key or digital license, but that can be entered after setup.
Does this work on Windows 10 as well?
Yes, the same command (oobe\bypassnro) works on Windows 10 setup. Windows 10 also has a visible “I don’t have internet” button on the network screen, so the bypass is less often needed.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- PowerPoint vs Keynote: Key Differences
- How to Sign Out of OneDrive in Windows 10
- Reduce Memory Use in Windows When RAM Is Low
- How to Set Up and Use Credential Manager on Windows 10
- Fix Microsoft Edge Battery Drain on Windows 11
- Type to Siri Instead of Talking on iPhone (iOS 11)