sodcalculator

10 Tech How-To

Fix Memory Integrity Is Off Error on Windows

Guide 10-45245 · Updated · Step by step

If Windows shows a “Memory integrity is off” warning in Windows Security, the fix is usually to turn the feature back on in the Core isolation settings, but the toggle may be grayed out or the system may fail to reboot with it enabled. This article walks through the exact steps to enable Memory integrity, what to do when it won’t turn on, and how to decide whether keeping it off is the right choice for your PC.

What Is Memory Integrity and Why Does Windows Warn You?

Memory integrity is a Windows security feature that runs the core of the operating system inside a virtualized environment, isolated from other processes. It is part of a larger group of protections called Core isolation, which uses hardware virtualization to create a secure boundary around critical kernel components. When Memory integrity is on, it prevents malicious code from injecting itself into high-integrity processes, which is a common technique used by rootkits and other advanced malware.

Windows displays a warning in the Windows Security app when the feature is off, because Microsoft considers it a baseline protection for modern devices. The warning appears as a yellow banner under Device security > Core isolation, and it may also show up in the Windows Security notification center. The system does not force you to enable it, but the repeated prompts are Microsoft’s way of nudging you to close a known security gap.

How to Enable Memory Integrity (Step-by-Step)

Enabling the feature takes less than a minute, but you will need to restart your PC for the change to take effect. Here is the exact path in Windows 10 and Windows 11:

  1. Open the Start menu and type Windows Security, then press Enter.
  2. Click Device security in the left sidebar (or the shield icon).
  3. Under Core isolation, click Core isolation details.
  4. Toggle Memory integrity to On.
  5. Restart your computer when prompted.

If the toggle is already on but the warning still appears, try toggling it off, restarting, then toggling it back on. A stale state can sometimes leave the warning visible even after a successful reboot.

Why the Toggle Is Grayed Out or Won’t Turn On

Several things can block Memory integrity from being enabled. The most common is an incompatible driver. Memory integrity requires all kernel-mode drivers to be compatible with the virtualization-based security (VBS) environment. If a driver is not compatible, Windows will refuse to turn the feature on, and the toggle may appear grayed out with a message like “This setting is managed by your administrator” or “Incompatible drivers found.”

Other causes include:

  • Outdated BIOS or firmware – Virtualization features must be enabled and up to date.
  • Virtualization disabled in BIOS – Memory integrity relies on Hyper-V and VT-x/AMD-V. If these are off, the feature cannot start.
  • Third-party antivirus or security software – Some security suites use kernel drivers that conflict with VBS.
  • Old or unsigned drivers – Especially common with older printers, network adapters, or gaming peripherals.
  • Group Policy or registry settings – On managed devices, an administrator may have disabled the feature deliberately.

How to Find and Fix Incompatible Drivers

When Memory integrity fails to turn on, Windows usually logs the offending driver in the Event Viewer. To see it:

  1. Press Win + X and select Event Viewer.
  2. Go to Windows Logs > System.
  3. Look for events with source Microsoft-Windows-CodeIntegrity or Hyper-V.
  4. Read the details – the driver name is often listed in the message.

Once you know the driver, you have three options:

  • Update the driver – Visit the hardware manufacturer’s website and download the latest version.
  • Uninstall the device – If the driver is for a device you no longer use, remove it via Device Manager.
  • Disable the driver – As a last resort, you can disable the driver in Device Manager, but that will disable the associated hardware.

After updating or removing the driver, restart and try enabling Memory integrity again. In some cases, you may need to uninstall the driver completely, reboot, and let Windows install a fresh copy.

What to Do If the PC Won’t Boot After Enabling It

Occasionally, enabling Memory integrity causes a boot loop or a blue screen, usually because a driver is incompatible but the system did not catch it in advance. If this happens, you need to turn the feature off from the Windows Recovery Environment:

  1. Force shutdown your PC by holding the power button for 10 seconds, then turn it on and off again two or three times until you see the Automatic Repair screen.
  2. Click Advanced options.
  3. Select Troubleshoot > Advanced options > Startup Settings.
  4. Click Restart, then press 4 or F4 to boot into Safe Mode.
  5. In Safe Mode, open Windows Security and turn Memory integrity off.
  6. Restart normally.

If you still cannot boot, you can use System Restore (if you have a restore point) or the command-line option to disable VBS via bcdedit /set hypervisorlaunchtype off from the Recovery Command Prompt. This is an advanced step, so only use it if you are comfortable with command-line tools.

Should You Leave It Off? Trade-offs and Performance Impact

Memory integrity is a security feature, but it is not free. Because it runs the kernel in a virtualized environment, it adds overhead to system calls and can reduce performance, particularly in scenarios that involve heavy I/O or gaming. Benchmarks and user reports show a typical impact of 5–10% in some workloads, though the effect varies widely by hardware and driver quality.

For most users, the security benefit outweighs the performance cost. The feature blocks a class of attacks that are otherwise difficult to detect. However, if you are using an older PC with limited resources, or if you rely on software that is incompatible (such as certain anti-cheat systems in games), leaving it off is a reasonable trade-off. The key is to make an informed choice: if you keep it off, ensure you have other protections in place, such as a reputable antivirus and regular Windows updates.

Frequently Asked Questions

Does Memory integrity affect gaming performance?

Yes, it can. The virtualization overhead can reduce frame rates by a small amount, especially on CPUs without strong virtualization support. Some anti-cheat software also conflicts with VBS, which is why some games may refuse to run with Memory integrity enabled. If you notice a significant performance drop or game compatibility issues, you may choose to disable it temporarily.

Why does my PC say “Memory integrity is off” even after I turn it on?

This usually means the toggle was turned on, but the system did not fully apply it. Try toggling it off, restarting, then toggling it back on. If the warning persists, check for incompatible drivers or group policy restrictions. You can also run the msinfo32 command and look at “Virtualization-based security” to see if it is actually running.

Is it safe to ignore the Memory integrity warning?

It is safe in the sense that your PC will continue to work normally, but you are missing a security layer. The warning is not an indication that your system is already compromised; it is a recommendation to enable a feature that is off. If you ignore it, just be aware that you have a higher risk of certain kernel-level attacks.

Can I enable Memory integrity if I use VirtualBox or VMware?

Yes, but you may need to disable Hyper-V or the hypervisor launcher, because Memory integrity relies on the same virtualization technology. Some virtualization tools have conflicts with VBS. You can try enabling it and see if your VM software still works; if not, you may need to choose between Memory integrity and running VMs.

Does Memory integrity work on all Windows versions?

Memory integrity is available on Windows 10 and Windows 11, but only on devices that support virtualization and have compatible drivers. It is not available on Windows 10 Home for older CPUs that lack SLAT (Second Level Address Translation). You can check your CPU’s compatibility by running systeminfo and looking at the “Hyper-V Requirements” section.

What is the difference between Core isolation and Memory integrity?

Core isolation is the umbrella term for a set of virtualization-based security features. Memory integrity is one of those features, specifically the one that protects kernel processes. Other Core isolation features include Credential Guard and HVCI (Hypervisor-protected Code Integrity). When you see “Core isolation” in Windows Security, Memory integrity is the main toggle you can control.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →