sodcalculator

10 Tech How-To

Fix Microsoft Store Error 0x80131500 in Windows 10

Guide 10-53271 · Updated · Step by step

Microsoft Store error 0x80131500 stops apps from downloading or updating on Windows 10, usually caused by corrupted cache files, incorrect date/time settings, or a blocked network connection. You can fix it by clearing the Store cache, checking your system clock, and running the built-in Windows Store Apps troubleshooter. Below are the exact steps, the likely causes, and what to try if the first fix does not work.

What Error 0x80131500 Means

The code 0x80131500 is a generic .NET Framework error that the Store displays when it cannot reach its own servers or when a background service fails to respond. It often appears as a pop-up when you open the Store, or as a banner on the app’s download page. The error is not specific to one app; it can block updates for any Store application, including built-in ones like Mail or Photos.

Because the code is shared across many Microsoft services, the fix is usually the same regardless of which app triggered it. The root cause is almost always one of three things: a corrupted Store cache, a system clock that is out of sync, or a network setting that blocks secure connections.

Before You Start: Quick Checks

Run these three checks first because they are fast and solve a surprising number of cases:

  • Check the date and time: Right-click the clock in the taskbar, select Adjust date/time, and turn on Set time automatically and Set time zone automatically. If they are already on, turn them off, restart, then turn them back on.
  • Restart the PC: A full restart clears temporary network state that the Store depends on. Use Start > Power > Restart, not Shut Down, because Windows 10’s fast startup can skip the reset.
  • Check for a VPN or proxy: If you use a VPN or a manual proxy, turn it off temporarily. The Store requires a direct connection to Microsoft’s servers, and some VPN configurations block the required ports.

Fix 1: Clear the Microsoft Store Cache

The most common cause of 0x80131500 is a damaged cache. Windows 10 includes a built-in tool for this:

  1. Press Windows Key + R to open the Run dialog.
  2. Type wsreset.exe and press Enter.
  3. A blank Command Prompt window will appear. Wait for it to finish; it may take a minute or two.
  4. The Store will open automatically when the process completes.

If the Store still shows the error, try clearing the cache manually. Open File Explorer, go to C:\Users\[YourUsername]\AppData\Local\Packages\Microsoft.WindowsStore_8wekyb3d8bbwe\LocalCache, and delete everything inside that folder. You may need to enable View > Hidden items to see the AppData folder.

Fix 2: Run the Windows Store Apps Troubleshooter

Windows 10 has a dedicated troubleshooter that automatically detects and repairs Store problems:

  1. Open Settings > Update & Security > Troubleshoot.
  2. Click Additional troubleshooters.
  3. Select Windows Store Apps and click Run the troubleshooter.
  4. Follow the on-screen instructions. It will check for corrupted files and reset the Store’s configuration if needed.

If the troubleshooter finds nothing, move on to the next fix. It is worth running even if you suspect the cause is elsewhere, because it also resets the Store’s internal database.

Fix 3: Reset the Store App via PowerShell

When the cache reset and the troubleshooter fail, a deeper reset often works. This removes the Store’s settings and re-registers it with Windows:

  1. Right-click the Start button and select Windows PowerShell (Admin).
  2. Type the following command and press Enter:
Get-AppxPackage -AllUsers Microsoft.WindowsStore | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
  1. Wait for the command to complete. It may take several minutes.
  2. Restart the PC and open the Store again.

This command is safe; it only re-registers the Store app with Windows and does not delete your account or installed apps.

Fix 4: Check Network and Proxy Settings

If the error persists, the problem is likely network-related. The Store uses HTTPS on port 443, and any filtering software or a misconfigured proxy can block it.

  • Disable the proxy: Go to Settings > Network & Internet > Proxy. Turn off Use a proxy server if it is on.
  • Flush DNS: Open Command Prompt as Administrator and run ipconfig /flushdns.
  • Reset Winsock: In the same Command Prompt, run netsh winsock reset, then restart the PC.
  • Temporarily disable third-party antivirus: Some security suites block the Store’s background processes. Disable the real-time protection for a few minutes to test; re-enable it immediately after.

If you are on a corporate network or a school Wi-Fi, the administrator may block Microsoft Store traffic. In that case, contact the IT department rather than trying to bypass the block.

Fix 5: Repair Windows System Files

Corrupted system files can also cause this error. Windows 10 includes two tools to check and repair them:

  1. Open Command Prompt as Administrator.
  2. Run sfc /scannow and wait for it to finish.
  3. Then run DISM /Online /Cleanup-Image /RestoreHealth.
  4. Restart the PC after both complete.

These tools scan the Windows installation and replace damaged files. The DISM command may take 10-20 minutes; do not close the window while it runs.

Frequently Asked Questions

Will I lose my installed apps if I reset the Store?

No. Resetting the Store cache or re-registering the app does not uninstall your apps. It only clears the Store’s own data, like its download history and settings. Your installed programs remain untouched.

Why does the error only happen on one user account?

If the error appears on one account but not another, the problem is likely a corrupted profile or a per-user network setting. Try creating a new local administrator account and testing the Store there. If it works, you can migrate your files to the new account or repair the old profile.

Can I update apps using the command line instead?

Yes. You can use PowerShell to update Store apps without opening the Store. Run Get-AppxPackage | Select Name, PackageFullName to list apps, then use the Add-AppxPackage command with the -Update flag. However, this only works if the Store’s backend is reachable; it will not fix the underlying network issue.

Is error 0x80131500 a sign of malware?

Not usually. The error is a standard Windows failure code, not a security alert. However, if you also notice unusual pop-ups or slow performance, run a full Windows Defender scan to rule out infection.

What if none of these fixes work?

If you have tried all the steps above, the issue may be with your Microsoft account or the Store service itself. Sign out of the Store (click your profile icon > Sign out), restart, and sign back in. As a last resort, check the Microsoft Service Status page online; occasionally the Store’s backend is down for maintenance.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →