sodcalculator

10 Tech How-To

Fix Mouse Not Working on Windows 10

Guide 10-48478 · Updated · Step by step

If your mouse cursor is frozen, jumping erratically, or not responding at all on Windows 10, the fix usually starts with checking the USB port or Bluetooth connection, then restarting the driver. This guide walks through the most common causes and step-by-step solutions, from simple physical checks to advanced driver resets, so you can get back to work quickly.

First Steps: Physical and Connection Checks

Before diving into software, rule out the simplest issues. A dead battery, a loose cable, or a faulty USB port can mimic a driver problem. Try these in order:

  • If wired, unplug the mouse and plug it into a different USB port (preferably a rear port on a desktop).
  • If wireless, replace the batteries with fresh ones, even if the LED still lights up—low voltage can cause intermittent drops.
  • For Bluetooth mice, remove the device from Windows Settings > Devices > Bluetooth & other devices, then pair it again.
  • For RF wireless mice (with a USB dongle), try a different USB port and ensure the dongle is within a few feet of the mouse.
  • Check the sensor on the bottom for dust or debris; clean it gently with a dry cloth.

If the mouse works in the BIOS or on another computer, the issue is almost certainly Windows or a driver conflict, not the hardware itself.

Restart the Mouse Driver

The most common software fix is to reset the mouse driver without a full system restart. This clears temporary glitches where the driver stops responding.

  1. Press Ctrl + Alt + Delete and select Task Manager.
  2. If your mouse is completely dead, use the keyboard: press Tab and arrow keys to navigate to More details at the bottom, then find the File menu (Alt + F) and select Run new task.
  3. Type devmgmt.msc and press Enter to open Device Manager.
  4. Expand Mice and other pointing devices.
  5. Right-click your mouse (usually “HID-compliant mouse”) and select Uninstall device. Do not check “Delete the driver software for this device.”
  6. Restart your computer. Windows will automatically reinstall the driver on boot.

If you cannot open Device Manager, you can also force a driver reload by disconnecting the mouse and reconnecting it after 10 seconds—Windows often reloads the driver on reconnect.

Check Windows Update and Driver Settings

Sometimes a recent Windows update or a corrupted driver file causes the issue. Here are the key places to check:

  • Windows Update: Go to Settings > Update & Security > Windows Update and click Check for updates. Install any pending updates, then restart.
  • Driver update: In Device Manager, right-click your mouse and select Update driver > Search automatically for drivers. If none are found, try Browse my computer > Let me pick from a list and select the “HID-compliant mouse” option.
  • Roll back driver: If the mouse worked before a recent update, right-click the mouse in Device Manager, select Properties > Driver tab, and click Roll Back Driver if available.
  • Disable Fast Startup: This Windows feature can sometimes cause hardware not to initialize properly. Go to Control Panel > Power Options > Choose what the power buttons do > Change settings that are currently unavailable, then uncheck Turn on fast startup.

Use Keyboard-Only Navigation to Access Settings

If the mouse is completely unresponsive, you can still navigate Windows using only the keyboard. This is essential for applying fixes when you cannot click anything.

  • Press the Windows key to open the Start menu, then type your search (e.g., “Device Manager”) and press Enter.
  • Use Tab, Shift + Tab, and arrow keys to move between buttons and options.
  • Press Spacebar or Enter to activate the selected item.
  • Use Alt + Tab to switch between open windows.
  • To right-click without a mouse, select the item and press Shift + F10 (or the context-menu key if your keyboard has one).

This keyboard method is also useful if your touchpad is broken on a laptop—you can still operate the system until you fix the driver.

Wireless and Bluetooth Specific Issues

Wireless mice have additional failure points beyond drivers. Here are the most common ones:

  • Interference: Move the USB dongle to a port on the front of the PC or use a USB extension cable to get it closer to the mouse. Other 2.4GHz devices (Wi-Fi routers, cordless phones) can cause dropouts.
  • Bluetooth pairing: Open Settings > Devices > Bluetooth & other devices. If the mouse shows as “Paired” but is not working, click it and select Remove device, then pair again.
  • Battery contact: Check the metal contacts inside the battery compartment; they can corrode or bend. Clean with a dry cloth if needed.
  • Power management: In Device Manager, expand Universal Serial Bus controllers, right-click each USB Root Hub and select Properties > Power Management, then uncheck Allow the computer to turn off this device to save power. This prevents Windows from cutting power to the USB port.

When to Suspect Hardware Failure

If you have tried all the above and the mouse still does not work, it may be a hardware failure. Signs include:

  • The mouse works on another computer but not on yours (points to a Windows issue, not hardware).
  • The mouse does not work on any computer (points to the mouse itself).
  • The cursor moves but clicks do nothing (could be a button failure, or a software issue like a stuck modifier key).
  • The cursor disappears entirely (try pressing Ctrl to make it appear if “hide pointer while typing” is enabled).

If you suspect hardware, try a different mouse. If that works, the original mouse is likely faulty. If no mouse works, the problem is in the computer’s USB controller or Windows installation—try a system restore to a point before the issue started.

Advanced Troubleshooting: System Restore and Safe Mode

When standard driver fixes fail, deeper Windows issues may be at play. Two powerful options are:

  • System Restore: If you have restore points, boot into Advanced Startup (hold Shift while clicking Restart from the login screen, or press F8 during boot if enabled). Then go to Troubleshoot > Advanced options > System Restore. Choose a point before the mouse stopped working.
  • Safe Mode: Boot into Safe Mode (from Advanced Startup > Startup Settings > Restart, then press 4). If the mouse works in Safe Mode, a third-party driver or startup program is interfering. You can then use System Configuration (msconfig) to disable suspicious startup items.

These methods are more time-consuming but often resolve issues caused by recent software changes.

Frequently Asked Questions

Why does my mouse freeze randomly but then work again?

Intermittent freezing is often caused by USB power management (Windows turning off the port to save power) or wireless interference. Disable the “Allow the computer to turn off this device” option on all USB Root Hubs, and for wireless mice, try a different USB port or a USB extension cable to reduce interference.

My mouse works after a restart but stops after a few minutes. What causes that?

This pattern often points to a driver conflict or a failing battery. First, replace the battery. If that doesn’t help, uninstall the mouse driver and let Windows reinstall it. Also check if the issue started after a Windows update—rolling back the driver may help.

Can a Windows update break my mouse?

Yes, Windows updates can introduce driver incompatibilities, especially for older mice or those with custom drivers. If the problem started after an update, check for a newer driver from the manufacturer, or use Device Manager to roll back to the previous driver version.

How do I use my keyboard as a mouse?

Windows has built-in Mouse Keys: press Left Alt + Left Shift + Num Lock to toggle it on. Then use the numeric keypad to move the cursor (8/2 for up/down, 4/6 for left/right), and 5 to click, + for double-click, and 0 to hold a button. This works even without a mouse.

Is there a way to reset all USB drivers at once?

Yes, you can uninstall all devices under “Universal Serial Bus controllers” in Device Manager, then restart. Windows will reinstall them all automatically. This can fix multiple USB devices not working, but it will temporarily disconnect all USB devices (keyboard, mouse, external drives) until the restart.

My mouse is new but doesn’t work. What should I do?

New mice usually need no drivers, but some gaming mice require software. First, try a different USB port. If it still doesn’t work, check the manufacturer’s website for a driver or firmware update. Also ensure the mouse is compatible with Windows 10—most are, but very old models may lack support.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →