sodcalculator

10 Tech How-To

Fix Network Issues After Windows 11 25H2 Upgrade

Guide 10-45565 · Updated · Step by step

If your Wi-Fi or Ethernet stops working right after upgrading to Windows 11 25H2, the fix usually involves updating your network driver, resetting the network stack, or disabling the new energy-saving feature. This article walks you through the most effective solutions, from quick checks to deeper resets, so you can get back online without reinstalling Windows.

Why Network Issues Happen After a Feature Update

Windows feature updates like 25H2 replace core system files and sometimes change how network drivers interact with the operating system. A driver that worked fine on 23H2 or 24H2 may not be compatible with the new build, causing the adapter to show a yellow exclamation mark in Device Manager or simply not connect. Another common trigger is the update resetting your network settings to defaults, which can disable custom IP configurations or VPN adapters.

Additionally, Microsoft occasionally introduces new power management defaults in feature updates. On 25H2, some users report that the “Allow the computer to turn off this device to save power” option gets re-enabled on their Wi-Fi adapter, which can drop the connection during idle periods. The steps below address both driver and settings issues.

Quick Checks Before You Dive In

Before running any commands, confirm the problem is isolated to your PC and not your router or ISP. Try connecting another device to the same network. If that works, the issue is on your Windows machine.

  • Restart your router and modem – unplug for 30 seconds, then plug back in.
  • Check if airplane mode is on – click the network icon in the system tray and toggle it off.
  • Run the Windows Network Troubleshooter – go to Settings > System > Troubleshoot > Other troubleshooters, then click “Run” next to “Network Adapter” and “Internet Connections.”
  • Look for the Wi-Fi button – some laptops have a physical switch or Fn key combo that disables the radio.

If these don’t help, move on to the driver and command-line fixes below.

Update or Roll Back Your Network Driver

The most common culprit is an outdated or incompatible driver. Windows Update usually installs drivers automatically, but the 25H2 upgrade can miss a critical update.

  1. Right-click the Start button and select Device Manager.
  2. Expand Network adapters. Look for your Wi-Fi or Ethernet adapter – it may have a small yellow triangle.
  3. Right-click the adapter and choose Update driver > Search automatically for drivers.
  4. If Windows finds nothing, go to your laptop or motherboard manufacturer’s website and download the latest driver for your exact model. Install it, then restart.

If the issue started immediately after the upgrade and you had a working driver before, try rolling back: in Device Manager, right-click the adapter, select Properties > Driver tab, and click Roll Back Driver. This option is only available if a previous driver is stored.

If you don’t know your adapter model, open Device Manager, expand Network adapters, and note the name (e.g., “Intel Wi-Fi 6 AX201” or “Realtek PCIe GbE Family Controller”). Search for that exact model plus your Windows version.

Reset the Network Stack with Command Prompt

When drivers aren’t the issue, the network configuration itself may be corrupted. Resetting the TCP/IP stack and flushing the DNS cache often clears up connection problems after a feature update.

  1. Right-click the Start button and choose Terminal (Admin) or Command Prompt (Admin).
  2. Run these commands one at a time, pressing Enter after each:
  • netsh winsock reset
  • netsh int ip reset
  • ipconfig /release
  • ipconfig /renew
  • ipconfig /flushdns

After the first two commands, restart your PC. The winsock reset rebuilds the Windows network API, and the IP reset restores default TCP/IP settings. The ipconfig commands force your adapter to get a fresh IP address from the router.

If you’re on a static IP configuration, you’ll need to re-enter it after the reset. Most home users use DHCP, so this won’t be an issue.

Disable the Power Saving Feature on Your Adapter

Windows 25H2 may re-enable a power management option that lets the system turn off your network adapter to save battery. This can cause intermittent disconnects, especially on laptops.

  1. Open Device Manager and expand Network adapters.
  2. Right-click your Wi-Fi or Ethernet adapter and select Properties.
  3. Go to the Power Management tab.
  4. Uncheck “Allow the computer to turn off this device to save power.”
  5. Click OK and restart your PC.

If you don’t see that tab, your driver may not support it, or the option is hidden. In that case, try the next fix.

Run Network Commands in Safe Mode

If you can’t connect at all, boot into Safe Mode with Networking. This loads only essential drivers and services, which can help you determine if a third-party security suite or VPN is blocking the connection.

  1. Hold Shift while clicking Restart in the Start menu.
  2. Choose Troubleshoot > Advanced options > Startup Settings > Restart.
  3. Press 5 or F5 for Safe Mode with Networking.

If you can connect in Safe Mode, the problem is likely a third-party app. Temporarily disable your antivirus firewall, VPN client, or proxy software, then restart normally. If you can’t connect even in Safe Mode, the issue is deeper – try the network reset in the next section.

Use the Built-in Network Reset

Windows 25H2 includes a “Network reset” feature that removes all network adapters and reinstalls them, and resets many network components to their default state. This is more thorough than the command-line reset.

  1. Go to Settings > Network & internet > Advanced network settings.
  2. Click Network reset.
  3. Click Reset now and confirm.

Your PC will restart, and Windows will forget all saved Wi-Fi networks, VPN connections, and custom IP settings. You’ll need to reconnect to your Wi-Fi and re-enter the password. This is often the final step before a clean install, but it resolves most persistent issues.

Frequently Asked Questions

Why did my Wi-Fi stop working after the 25H2 update?

Most often it’s a driver compatibility issue. The update may have replaced your driver with a generic one, or your existing driver isn’t fully compatible with the new build. Updating or rolling back the driver fixes it in the majority of cases.

Will a system restore undo the 25H2 upgrade?

Yes, but only if you have a restore point from before the upgrade. System Restore can roll back Windows system files and settings, but it won’t remove the 25H2 feature update itself – that requires uninstalling the update from Settings > Windows Update > Update history.

How do I uninstall the 25H2 update if nothing else works?

Go to Settings > Windows Update > Update history > Uninstall updates. Look for the entry that says “Feature Update to Windows 11, version 25H2” and uninstall it. This will revert to your previous version, but you’ll have to reinstall the update later after Microsoft fixes the issues.

Can a VPN cause network problems after the upgrade?

Yes. VPN drivers and virtual adapters can conflict with the new network stack. Try uninstalling your VPN software temporarily, or disable its virtual adapter in Device Manager, then test your connection.

Why does my Ethernet work but Wi-Fi doesn’t?

This usually points to a Wi-Fi-specific driver or power management issue. Try updating the Wi-Fi driver, disabling power saving on the adapter, and forgetting/reconnecting to your network.

Is there a way to prevent this in future updates?

Keep your drivers updated before installing feature updates, and consider pausing updates for a few weeks after a major release. You can also create a system restore point before updating – that gives you a quick way back if something breaks.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →