If Windows shows “No speakers or headphones are plugged in” even when your audio device is connected, the fix is usually a driver reset, a disabled device, or a Windows audio service restart. This guide walks through the most common causes and step-by-step solutions, from quick checks to deeper driver and service repairs.
Why Windows Shows This Error
Windows displays this message when the audio subsystem cannot detect an active output device. The system relies on a chain of components: the physical connection, the audio driver, the Windows audio services, and the playback device settings. A break in any link produces the error, even if the hardware is fine. Common triggers include:
- Outdated or corrupted audio drivers after a Windows update.
- A device disabled in Sound settings or Device Manager.
- Windows Audio service stopped or hung.
- Front panel audio jack not connected to the motherboard header.
- HDMI or DisplayPort audio selected when no monitor speakers exist.
Quick Checks Before Diving In
Before reinstalling drivers, rule out simple issues. Test the headphones or speakers on another device to confirm they work. Check the jack type: most PCs use a 3.5mm TRS connector, but some phones use TRRS with a microphone ring, which may not seat fully. If using USB headphones, try a different USB port. Also verify the device is not muted or set to zero volume in the volume mixer (right-click the speaker icon and open Volume Mixer).
Enable the Playback Device
Windows sometimes disables a device after a driver update or a power event. To re-enable it:
- Right-click the speaker icon in the system tray and select “Sounds” (or “Open Sound settings” then “Sound Control Panel”).
- Go to the “Playback” tab.
- Right-click an empty area and check “Show Disabled Devices” and “Show Disconnected Devices”.
- If your device appears grayed out, right-click it and choose “Enable”.
- Select the device and click “Set Default”, then “OK”.
If the device is listed as “Not plugged in”, the jack detection may be stuck. Try unplugging and replugging the cable while the window is open.
Restart Windows Audio Services
The Windows Audio service manages all audio devices. If it stops, no device appears. Restart it:
- Press Win + R, type
services.msc, and press Enter. - Scroll to “Windows Audio”. Right-click and select “Restart”.
- Also restart “Windows Audio Endpoint Builder”.
- If the service is stopped, set its Startup type to “Automatic” and start it.
After restarting, test audio. If the error persists, the service may be crashing due to a driver conflict.
Update or Reinstall Audio Drivers
Driver corruption is the most frequent cause. To update:
- Press Win + X and select “Device Manager”.
- Expand “Sound, video and game controllers”.
- Right-click your audio device (e.g., Realtek High Definition Audio) and choose “Update driver”.
- Select “Search automatically for drivers”. If Windows finds none, try “Browse my computer” then “Let me pick from a list” and choose “High Definition Audio Device” (the generic Microsoft driver).
- If updating fails, right-click and choose “Uninstall device”, check “Delete the driver software for this device”, then restart. Windows will reinstall the driver automatically.
For laptops, also check the chipset and BIOS updates from the manufacturer, as audio can depend on those.
Run the Built-in Audio Troubleshooter
Windows includes a troubleshooter that automatically detects and fixes common audio issues:
- Open Settings (Win + I) > System > Sound.
- Click “Troubleshoot” under “Output” or “Input”.
- Follow the prompts. It may reset the default device or restart services.
This often resolves the issue if the problem is a misconfigured setting rather than a driver fault.
Check Jack Detection and Front Panel Connections
Desktop PCs with front panel audio jacks rely on a cable connected to the motherboard header (usually labeled HD_AUDIO or FP_AUDIO). If that cable is loose or disconnected, the front jack will not work, and Windows may show the “No speakers” error even when headphones are plugged into the front. Open the case, reseat the cable, and ensure it is oriented correctly (the missing pin on the header matches the missing hole on the connector). Also, some cases have an AC’97 vs HD Audio jumper; modern boards use HD Audio, so set the jumper accordingly.
If the rear jack works but the front does not, the issue is physical, not software.
Frequently Asked Questions
Why does Windows say “No speakers or headphones are plugged in” when they are?
This usually means the audio device is disabled, the driver is corrupted, or the Windows Audio service is not running. Follow the steps above: enable the device in Sound settings, restart the service, and reinstall the driver.
My headphones work on my phone but not on my PC. What’s wrong?
The headphones are fine, so the issue is the PC’s audio output. Check the jack type (TRS vs TRRS), try a different port, and verify the driver is not set to a different device. Also, some PCs have separate jacks for mic and headphones; make sure you’re using the headphone jack (usually green).
How do I force Windows to detect my headphones?
Unplug the headphones, wait 10 seconds, and plug them back in while the Sound Control Panel is open. If that fails, disable and re-enable the audio device in Device Manager, or run the audio troubleshooter.
Will updating BIOS help with audio issues?
Sometimes. BIOS updates can improve compatibility with audio hardware, especially on laptops. Check your manufacturer’s support page for the latest BIOS and chipset drivers. Only update BIOS if you are comfortable with the process, as an interrupted update can damage the system.
Why does my HDMI monitor show as “Not plugged in”?
That is normal if the monitor does not have speakers or is turned off. If you want to use HDMI audio, ensure the monitor has built-in speakers and is set as the default playback device. If not, disable it in Sound settings to avoid confusion.
Can a Windows update cause this error?
Yes. Windows updates can replace or break audio drivers. If the error started after an update, roll back the driver (Device Manager > Driver tab > Roll Back Driver) or install the latest driver from the manufacturer’s website.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Disable Autocorrect on iPhone or iPad: Quick Guide
- Custom Keyboard Shortcuts on Windows 11 & macOS
- Restore Windows 11 Display Scaling to Recommended
- Semiconductor Cycle: How Investors Track It0.0
- Microsoft Store Error 0x80073d12: Fixes That Work
- View Notification Count on iPhone: Full Guide