If Windows 10 shows “No WiFi networks found” in the network list, the fix usually involves restarting the Wi-Fi adapter, updating its driver, or resetting the network stack. This guide walks through the most common causes and step-by-step solutions, from quick checks to deeper resets.
Why Windows 10 Loses Sight of Wi-Fi Networks
Windows 10 relies on a wireless adapter (a small chip inside your laptop or a USB dongle) to scan for nearby networks. When the adapter stops responding, or when the software that controls it (the driver) becomes corrupted, the system reports “No WiFi networks found” even though other devices can see your router. This can happen after a Windows update, after waking from sleep, or when airplane mode gets stuck on.
Other common triggers include:
- Driver corruption – the most frequent cause after a system update.
- Power saving – Windows may turn off the adapter to save battery and fail to turn it back on.
- Airplane mode – sometimes the toggle doesn’t clear properly.
- Network stack issues – corrupted IP or DNS settings can prevent scanning.
- Physical switch – many laptops have a side switch or function key that disables Wi-Fi.
Quick Checks Before You Troubleshoot
Start with these simple steps, as they often solve the problem instantly:
- Toggle Airplane mode – Click the network icon in the taskbar, turn Airplane mode on, wait 10 seconds, then turn it off.
- Restart your PC – A full restart (not shutdown + boot, but restart) reloads the adapter driver.
- Check the physical Wi-Fi switch – Look for a switch on the side or front of the laptop, or a function key like F12 with an antenna icon. Make sure it’s on.
- Verify other devices – If your phone also can’t see the network, the issue is with the router, not your PC.
If none of these work, move on to the deeper fixes below.
Restart the Wi-Fi Adapter
Sometimes the adapter just needs a fresh start. Here’s how to restart it manually:
- Press Windows + X and select Device Manager.
- Expand Network adapters.
- Right-click your Wi-Fi adapter (it often has “Wireless”, “Wi-Fi”, or “802.11” in the name) and select Disable device.
- Wait 10 seconds, then right-click again and select Enable device.
This forces Windows to reload the driver. If the adapter doesn’t appear in Device Manager at all, it may be hidden – click View and select Show hidden devices.
Update or Reinstall the Wireless Driver
An outdated or corrupted driver is the #1 cause of “No WiFi networks found.” To update it:
- Open Device Manager again.
- Right-click the Wi-Fi adapter and choose Update driver.
- Select Search automatically for updated driver software.
- If Windows finds nothing, go to your laptop manufacturer’s support site, download the latest Wi-Fi driver for your exact model, and install it manually.
If updating doesn’t help, try uninstalling the driver:
- Right-click the adapter and select Uninstall device.
- Check the box “Delete the driver software for this device” if it appears.
- Restart your PC. Windows will automatically reinstall the driver.
Run the Windows Network Troubleshooter
Windows 10 has a built-in troubleshooter that can automatically detect and fix common network problems.
- Go to Settings > Network & Internet > Status.
- Click Network troubleshooter (or “Network and Internet troubleshooter”).
- Follow the on-screen steps. It may reset the adapter or clear the DNS cache.
This doesn’t fix every issue, but it’s worth trying before more drastic steps.
Reset the Network Stack
If the Wi-Fi adapter works but can’t scan, the network configuration may be corrupted. Resetting the network stack clears all IP and DNS settings:
- Open Command Prompt as administrator (type “cmd” in the Start menu, right-click, select “Run as administrator”).
- Run these commands one by one, pressing Enter after each:
netsh winsock resetnetsh int ip resetipconfig /releaseipconfig /renewipconfig /flushdns
- Restart your PC.
Note: You need an internet connection for ipconfig /renew to get a new IP, but the reset commands work offline. If you’re using Ethernet, plug in a cable temporarily.
Use Network Reset (Windows 10 Feature)
Windows 10 includes a “Network reset” option that reinstalls all network adapters and resets everything to default.
- Go to Settings > Network & Internet > Status.
- Click Network reset.
- Click Reset now and confirm.
This will remove all saved Wi-Fi networks and VPN connections, so you’ll need to reconnect to your Wi-Fi after the restart. It’s a last resort before reinstalling Windows.
When to Suspect Hardware Failure
If none of the above works, the adapter itself may be failing. Signs include:
- The Wi-Fi adapter disappears from Device Manager even after showing hidden devices.
- The adapter has a yellow warning icon in Device Manager.
- Other devices connect fine, but your PC never sees any network.
In that case, try an external USB Wi-Fi adapter. If that works, your internal adapter is faulty and may need replacement. Also check if your laptop is still under warranty.
Frequently Asked Questions
Why does my Wi-Fi show “No networks found” but my phone can see them?
This almost always means your PC’s Wi-Fi adapter or driver is the problem, not the router. Other devices seeing networks proves the router is broadcasting. Focus on restarting the adapter, updating the driver, or resetting the network stack.
Will resetting Windows 10 fix Wi-Fi issues?
Resetting Windows (Settings > Update & Security > Recovery > Reset this PC) reinstalls the operating system and all drivers, which can fix stubborn driver corruption. However, it’s a drastic step – try the less invasive fixes first. It also removes your installed apps, so back up your files.
How do I know if my Wi-Fi adapter is dead?
If the adapter doesn’t appear in Device Manager at all (even with hidden devices shown), or if it shows an error code like “Code 10” or “Code 43”, it’s likely dead. Try booting into a live Linux USB – if the adapter still isn’t detected, hardware failure is almost certain.
Can a Windows update cause “No WiFi networks found”?
Yes. Windows updates sometimes install incompatible drivers or change settings. If the problem started after an update, roll back the driver (Device Manager > adapter > Properties > Driver > Roll Back Driver) or uninstall the latest update (Settings > Update & Security > Windows Update > View update history > Uninstall updates).
Is there a command to force a Wi-Fi rescan?
You can refresh the network list by clicking the network icon in the taskbar and selecting “Refresh” (if available), or by running netsh wlan show networks in Command Prompt. But if the adapter is stuck, a rescan won’t help – you need to restart the adapter first.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Apps Not Downloading From Play Store
- Secure a Samsung Galaxy After a Zero-Day Disclosure
- What to Check Before Installing Linux Alongside Windows
- Fix OEM Activation Error 0xc004c060 in Windows 10
- Why Does My App Run One Query for the List and One per Item?
- Fix Google Chrome Has Stopped Working