A slow external drive in Windows 10 is usually caused by a bad USB cable or port, outdated drivers, or Windows power management throttling the drive. This guide walks you through the most effective fixes, from simple cable swaps to driver and power setting changes, so you can get your drive back to full speed.
Why Is My External Drive Slow?
Before you start troubleshooting, it helps to understand the common culprits. External drives connect via USB, and the speed is limited by the slowest link: the drive itself, the enclosure’s bridge board, the cable, or the port. A drive that’s suddenly slow often points to a connection issue, not a failing drive. Other frequent causes include:
- USB port or cable problems – a loose connection, a damaged cable, or using a charge-only cable.
- Power management – Windows may put the drive to sleep or reduce its power to save energy.
- Outdated or corrupted drivers – the generic Windows driver may not be optimal for your drive.
- Background processes – antivirus scans, Windows Search indexing, or backup software can hog the drive.
- File system fragmentation – especially on older HDDs, fragmentation slows read/write speeds.
Quick Checks: Cable, Port, and USB Standard
Start with the simplest fixes—they’re cheap and often solve the problem.
- Try a different USB port. Use a port directly on the computer (not a hub). If you have USB 3.0 ports (blue interior), use them—they’re much faster than USB 2.0 (black interior).
- Swap the cable. Use the cable that came with the drive, or a high-quality, short cable. Some cables are charge-only and don’t carry data at full speed.
- Check the connection. Unplug and re-plug the drive, and ensure the connector is fully seated.
- Test on another computer. If the drive is fast elsewhere, the problem is your PC’s port or drivers.
Update or Reinstall USB Drivers
Outdated or corrupted USB drivers can throttle your drive. Here’s how to update them:
- Right-click the Start button and select Device Manager.
- Expand Disk drives and Universal Serial Bus controllers.
- Right-click your external drive (under Disk drives) and select Update driver → Search automatically.
- Do the same for any USB controller devices (like “USB Root Hub” or “Intel USB 3.0 eXtensible Host Controller”).
- If Windows finds nothing, right-click the drive and select Uninstall device, then restart your PC. Windows will reinstall the driver.
If you know the drive’s manufacturer, you can also download the latest drivers from their support site—but the generic Microsoft driver often works just fine.
Change Power Management Settings
Windows 10 has a feature that puts USB devices to sleep to save power. This can make your drive appear slow when it wakes up, or even disconnect it. Disable this for your drive:
- Open Device Manager again.
- Expand Universal Serial Bus controllers.
- Double-click each USB Root Hub (and any “Host Controller”).
- Go to the Power Management tab and uncheck “Allow the computer to turn off this device to save power.”
- Click OK and repeat for all USB hubs.
Also, change your power plan: go to Control Panel → Hardware and Sound → Power Options. Click Change plan settings next to your active plan, then Change advanced power settings. Expand USB settings → USB selective suspend setting and set it to Disabled for both “On battery” and “Plugged in.”
Run Disk Error Checking and Optimize
File system errors or fragmentation can slow down a drive. Windows has built-in tools to fix both.
- Error checking: Open This PC, right-click your external drive, select Properties → Tools tab → Check under Error checking. Follow the prompts. This scans for bad sectors and file system issues.
- Optimize (defragment) HDDs: In the same Tools tab, click Optimize. For SSDs, it runs TRIM; for HDDs, it defragments. Run it, then check the drive’s status.
Note: If the drive is an SSD, don’t defragment it manually—Windows will use TRIM automatically. Defragmenting an SSD wears it out faster.
Disable Windows Search Indexing (If Needed)
Windows Search constantly indexes files on your drives, which can slow down an external drive, especially if it’s a large HDD. To exclude the drive from indexing:
- Open This PC, right-click your external drive → Properties.
- On the General tab, uncheck “Allow files on this drive to have contents indexed in addition to file properties.”
- Click OK. If a prompt asks to apply changes to subfolders, select “Apply changes to drive X:older, subfolders and files.”
This stops Windows from constantly scanning the drive, which can free up bandwidth.
When All Else Fails: Check Drive Health and Backup
If the drive is still slow, it might be failing. Run a health check:
- Use Error checking as above—if it finds bad sectors, back up your data immediately.
- Open Command Prompt as administrator and run
chkdsk X: /f /r(replace X with your drive letter). This will scan and attempt to repair errors. It can take hours on a large drive. - If the drive makes clicking noises or is extremely slow, back up your important files right away. A failing drive won’t get better with software fixes.
Also, consider the drive’s age and type. An old spinning HDD will be slower than a new SSD—that’s normal. If the drive is USB 2.0, the maximum speed is about 30 MB/s, so it will never be as fast as a USB 3.0 drive.
Frequently Asked Questions
Why is my external drive so slow when copying files?
Copying many small files is slower than copying one large file because each file requires overhead. If you’re copying thousands of small files, try zipping them first. Also, ensure you’re using a USB 3.0 port and cable—if the drive is connected to a USB 2.0 port, you’ll see speeds capped at around 30 MB/s.
Can a USB hub cause slow transfer speeds?
Yes. A non-powered hub or one that shares bandwidth among multiple devices can throttle your drive. Connect the drive directly to a port on your computer, preferably a USB 3.0 port. If you must use a hub, use a powered one.
Is it safe to unplug my external drive without ejecting?
No. Windows caches writes to the drive, so unplugging without ejecting can cause data loss or corruption. Always use the Safely Remove Hardware icon in the system tray, or select Eject in File Explorer.
How do I know if my drive is failing?
Common signs include unusual clicking or grinding noises, very slow speeds, files that won’t open, and frequent disconnections. Run a health check with chkdsk or a third-party tool like CrystalDiskInfo (free). If it reports bad sectors or reallocated sectors, back up your data immediately.
Does defragmenting an SSD help?
No. SSDs don’t need defragmentation—it actually reduces their lifespan. Windows 10 automatically uses TRIM for SSDs, which is sufficient. Defragmenting is only for traditional HDDs.
Why does my drive disconnect randomly?
This is often caused by power management (USB selective suspend) or a loose cable. Disable the USB power saving settings as described above, and try a different cable. If the drive has its own power supply, make sure it’s plugged in.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- iOS 18 Safari Not Working? Fixes That Help
- How to Check Your Linux Kernel for Spectre
- iPhone Safe Mode: How to Enable or Disable It
- Fix Slow Internet Lag on Samsung Galaxy Note
- How to Get iOS 17 on iPhone X (Safe Methods)
- Fix Gmail IMAP Error in Outlook: Step-by-Step