sodcalculator

10 Tech How-To

Fix Spatial Audio Not Working on AirPods Pro

Guide 10-45314 · Updated · Step by step

Spatial Audio on AirPods Pro can stop working for a few common reasons, and most of them are quick to fix. Start by checking that Spatial Audio is enabled in Control Center, your device is updated, and the audio source supports it; if it still doesn’t work, a reset of your AirPods Pro usually resolves the issue. Below is a step-by-step guide covering every likely cause and fix.

What Spatial Audio Does and Why It Stops

Spatial Audio creates a surround-sound experience by using the gyroscope and accelerometers inside your AirPods Pro to track your head movement. It keeps the sound anchored to your device, so when you turn your head, the audio stays fixed in space. This works with Dolby Atmos content, certain Apple Music tracks, and movies or shows in supported apps. When it stops working, the sound collapses back to ordinary stereo, and you lose the immersive effect.

The most common reasons for failure are:

  • Spatial Audio is turned off in Control Center or Settings.
  • The connected device is not updated to a recent iOS, iPadOS, or macOS version.
  • The audio source (app or file) does not support Spatial Audio or Dolby Atmos.
  • Head Tracking is disabled or the AirPods Pro firmware is outdated.
  • Bluetooth interference or a temporary software glitch.

Quick Checklist Before You Troubleshoot

Before diving into deeper fixes, verify these basics:

  1. Make sure both AirPods Pro are in your ears and you are not using only one. Spatial Audio requires both earbuds.
  2. Check that your iPhone or iPad is running the latest iOS. Go to Settings > General > Software Update.
  3. Confirm the app you are using actually supports Spatial Audio. Apple Music, Netflix, Disney+, and Apple TV+ are common examples, but not all content is mixed in Dolby Atmos.
  4. Turn off Low Power Mode on your iPhone or iPad, as it can disable some audio processing features.

How to Turn On Spatial Audio and Head Tracking

The most direct way to enable Spatial Audio is through Control Center:

  1. With your AirPods Pro connected, open Control Center on your iPhone or iPad (swipe down from the top-right corner on Face ID models, or up from the bottom on older models).
  2. Press and hold the volume slider until you see the AirPods controls.
  3. Tap the Spatial Audio icon (it looks like a circle with a person inside).
  4. Choose Fixed or Head Tracked. Fixed keeps the sound anchored to your device; Head Tracked makes it follow your head movement.

If the icon is grayed out, the current audio source does not support Spatial Audio. Try a different song or video. You can also check in Settings > Bluetooth > tap the “i” next to your AirPods Pro to see if Spatial Audio is listed and toggled on.

Update AirPods Pro Firmware

AirPods Pro firmware updates install automatically when your AirPods are connected to your iPhone and charging. To check the current firmware:

  1. Go to Settings > Bluetooth and tap the “i” next to your AirPods Pro.
  2. Look at the Firmware Version field. Compare it to the latest version listed on Apple’s support page (search “AirPods firmware version” on Apple’s site).
  3. If it’s outdated, place your AirPods Pro back in the case, plug the case into power, and keep your iPhone nearby. The update usually happens within a few minutes to an hour.

If the firmware won’t update, forget the device and pair it again, then repeat the charging process.

Reset Your AirPods Pro

A reset clears minor software glitches and re-syncs the sensors. Here’s how:

  1. Put your AirPods Pro in the charging case and close the lid. Wait 30 seconds.
  2. On your iPhone, go to Settings > Bluetooth, tap the “i” next to your AirPods Pro, then tap Forget This Device.
  3. With the case lid open, press and hold the button on the back of the case for about 15 seconds until the status light flashes amber, then white.
  4. Reconnect your AirPods Pro to your iPhone by holding the case near the phone and following the on-screen setup.
  5. After pairing, re-enable Spatial Audio from Control Center.

This reset does not erase any settings on your iPhone; it only resets the AirPods Pro themselves.

Check Audio Source and App Compatibility

Not all audio is created equal. Spatial Audio only works with content that has surround sound or Dolby Atmos metadata. For example:

  • Apple Music: Look for songs or albums labeled “Dolby Atmos” in the description. You can also go to Settings > Music > Audio and ensure “Dolby Atmos” is set to “Automatic” or “Always On.”
  • Movies and TV: Apps like Apple TV+, Netflix, and Disney+ offer Atmos on select titles. Check the show’s details page for an Atmos badge.
  • Podcasts and audiobooks: These are usually stereo and will not use Spatial Audio unless the producer specifically mixes them that way.
  • Phone calls and video calls: Spatial Audio does not apply to standard phone calls or FaceTime audio.

If you are playing a file from a third-party app that doesn’t support Spatial Audio, the feature will simply not activate. Try a known Atmos track from Apple Music to test.

Other Common Issues and Fixes

If the above steps don’t work, try these additional checks:

  • Bluetooth interference: Move away from Wi-Fi routers, microwaves, or other Bluetooth devices. Turn Bluetooth off and on again on your iPhone.
  • Ear tip fit: Spatial Audio uses the inward-facing microphone to adjust sound. If the ear tips are loose, the AirPods Pro may not detect a proper seal. Try a different size ear tip from the box.
  • Volume level: Some users report Spatial Audio sounds weaker at very low volumes. Increase the volume and see if the effect becomes noticeable.
  • Restart your device: A simple restart of your iPhone or iPad can clear temporary audio glitches.
  • Check for a stuck setting: Go to Settings > Accessibility > Audio/Visual and make sure “Headphone Accommodations” is not overriding Spatial Audio. If it is, turn it off or adjust the settings.

Frequently Asked Questions

Why is Spatial Audio grayed out on my AirPods Pro?

The most common reason is that the current audio source does not support Spatial Audio. Try playing a Dolby Atmos track from Apple Music or a supported movie. Also, make sure you are wearing both AirPods Pro; the feature is disabled when only one is in your ear.

Does Spatial Audio work with Android or Windows?

No. Spatial Audio on AirPods Pro requires Apple devices (iPhone, iPad, Mac, or Apple TV) because it relies on the device’s software and the AirPods’ sensors. On Android or Windows, you will get standard stereo audio only.

How do I know if my AirPods Pro firmware is up to date?

Check the firmware version in Settings > Bluetooth > tap the “i” next to your AirPods Pro. Compare it to the latest version listed on Apple’s support website. If it’s older, place your AirPods in the case, connect to power, and keep them near your iPhone until the update completes.

Can I use Spatial Audio with non-Apple apps like Spotify?

Spotify does not currently support Dolby Atmos or Spatial Audio on AirPods Pro. The feature works only with apps that deliver Dolby Atmos or surround sound content, such as Apple Music, Netflix, Disney+, and Apple TV+.

Why does Spatial Audio sound like it’s not working even when it’s on?

Sometimes the effect is subtle, especially with music. Try a movie or a dedicated demo track. Also, ensure Head Tracking is enabled—if it’s set to “Fixed,” the sound won’t move with your head, which can make it seem inactive.

Will resetting my AirPods Pro fix all issues?

Resetting clears most software glitches, but if the problem persists after a reset and a firmware update, it could be a hardware issue. In that case, contact Apple Support or visit an Apple Store for diagnostic testing.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →