If Windows shows “Unknown USB Device” in Device Manager, the fix is usually a driver reinstall, a power management change, or a USB port/controller reset. This guide walks through the most common causes and step-by-step fixes that work for current versions of Windows 10 and 11.
What “Unknown USB Device” Means
When you plug in a USB device, Windows tries to identify it by reading a descriptor (a small data packet) that tells the system what the device is and which driver to load. If that handshake fails, Windows labels it “Unknown USB Device (Device Descriptor Request Failed)” or “Unknown USB Device (Set Address Failed)” in Device Manager under “Universal Serial Bus controllers.” The device may not work at all, or it may work intermittently.
This error usually points to a hardware or power problem, not a corrupted driver. However, the first thing most people try—reinstalling the driver—is still a valid step because it resets the device’s enumeration process.
Before You Start: Quick Checks
- Try a different USB port, preferably on the back of the computer (directly on the motherboard).
- Use a different cable, especially if it’s a phone or external drive—cables fail more often than you’d think.
- Test the device on another computer. If it works there, the problem is your PC’s port or settings.
- Unplug all other USB devices except the one that’s failing. Too many devices can cause power or bandwidth issues.
If the device works elsewhere, move on to the software fixes below. If it doesn’t work anywhere, the device itself is likely faulty.
How to Fix It: Step-by-Step
1. Reinstall the USB Driver in Device Manager
- Press Windows + X and select Device Manager.
- Expand Universal Serial Bus controllers.
- Right-click the “Unknown USB Device” entry and select Uninstall device.
- Restart your computer. Windows will re-detect the hardware and reinstall the driver automatically.
If the error persists, try uninstalling all entries under “Universal Serial Bus controllers” (including the ones that look like “USB Root Hub” or “Host Controller”) and restart. Windows will rebuild the entire USB stack.
2. Disable USB Selective Suspend
Windows can put individual USB ports to sleep to save power, which sometimes causes devices to fail to wake properly.
- Open Control Panel → Power Options.
- Click Change plan settings next to your active plan, then Change advanced power settings.
- Expand USB settings → USB selective suspend setting and set it to Disabled for both “On battery” and “Plugged in.”
- Click Apply and restart.
3. Update the USB Controller Driver
- In Device Manager, right-click the “Unknown USB Device” and select Update driver.
- Choose Search automatically for drivers. If Windows finds nothing, try Browse my computer → Let me pick from a list → select USB Composite Device or USB Device and click Next.
- If that works, the device will show up correctly. If not, move on.
4. Check for Windows Updates
Microsoft frequently ships USB fixes via Windows Update. Go to Settings → Windows Update → Check for updates. Install any pending updates, especially “driver updates” under “Optional updates.”
5. Use the Hardware and Devices Troubleshooter
- Open Settings → System → Troubleshoot → Other troubleshooters.
- Run the Hardware and Devices troubleshooter (or “USB” if listed).
- Follow the prompts; it may automatically detect and fix issues.
6. Reset the USB Controller (Power Drain)
Sometimes the USB controller gets stuck. For a desktop, shut down, unplug the power cord, hold the power button for 10 seconds, then plug back in and boot. For a laptop, shut down, remove the battery (if removable), hold the power button for 10 seconds, then reassemble and boot.
7. Disable Fast Startup
Fast Startup can cause USB drivers to load incorrectly on boot.
- Open Control Panel → Power Options → Choose what the power buttons do.
- Click Change settings that are currently unavailable.
- Uncheck Turn on fast startup and save changes.
When It’s a Hardware Problem
If none of the above works, the issue is likely physical. Common culprits include:
- Faulty cable – try a high-quality, shorter cable.
- Damaged USB port – inspect for bent pins or debris.
- Underpowered device – some external drives need more power than a single port provides. Use a powered hub or a Y-cable.
- Device itself is dead – if it fails on every computer, it’s time to replace it.
For a desktop, you can also try a PCIe USB expansion card if the motherboard’s USB controller is failing.
USB-C and Thunderbolt Considerations
If your device uses USB-C, the error can also be caused by a lack of alternate mode support (e.g., DisplayPort over USB-C) or a missing Thunderbolt driver. Check if your laptop’s USB-C port supports the device’s protocol. For Thunderbolt devices, install the Intel Thunderbolt driver from your PC manufacturer’s website. Also, some USB-C cables are “charge-only” and lack data lines—try a cable that explicitly says it supports data.
Frequently Asked Questions
Why does my USB device work sometimes and fail other times?
This usually points to a power management issue or a loose connection. Disabling USB selective suspend (as above) helps. If it’s a laptop, also check that the battery isn’t draining to a critical level—some devices require more power than a low battery can supply.
How do I remove a stuck “Unknown USB Device” that won’t go away?
Unplug the device, then in Device Manager click View → Show hidden devices. Under “Universal Serial Bus controllers,” right-click the grayed-out entry and select Uninstall device. Restart your PC.
Can a USB hub cause this error?
Yes. Unpowered hubs often can’t supply enough power, and older hubs may not support the device’s speed. Try plugging directly into the computer. If you must use a hub, choose a powered one.
Is there a way to force Windows to recognize a device?
Sometimes you can manually assign a driver: in Device Manager, right-click the unknown device → Update driver → Browse my computer → Let me pick from a list → choose “USB Composite Device” or the device’s vendor driver if you have it. If that doesn’t work, the device may be incompatible or broken.
Does this error affect Mac or Linux?
No, “Unknown USB Device” is a Windows-specific message. Mac and Linux handle USB enumeration differently, so if a device fails there, it’s usually a hardware issue.
What if the device is a printer or scanner?
For printers/scanners, also reinstall the manufacturer’s software. Sometimes the Windows generic driver isn’t enough. Uninstall the device from Device Manager, then run the manufacturer’s installer.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- OneDrive Connection Problem Windows 10: Fixes
- Android Battery Care: 12 Steps to Longer Life
- Could Not Assign Applications Error on MacBook: Fix
- Fix Slow Search on Windows 11: Top Methods
- Customize Mission Control & Desktop Spaces on Mac
- Code 39 Sound Driver Issue: Fixed?