USB Code 43 is a Windows Device Manager error that stops a USB device from working, usually because the hardware or its driver has failed. This guide explains the most common causes and provides step-by-step fixes you can try in order, from quick software resets to deeper driver and power management changes.
What Does Code 43 Mean?
When Windows reports “Windows has stopped this device because it has reported a problem (Code 43)”, it means the operating system has detected a fault with the USB device or its driver. The error appears in Device Manager under the device’s properties, and the device typically won’t function until the issue is resolved. Code 43 can affect any USB device—flash drives, external hard drives, printers, webcams, keyboards, or even internal components that use a USB connection like a card reader.
Windows generates this error when the device fails to respond to the driver correctly, or when the driver itself crashes. It is not a single, specific failure—it’s a general message that covers many underlying problems, which is why the fix often involves trial and error.
Common Causes of Code 43
- Corrupted or outdated drivers – the most frequent cause, especially after a Windows update or driver update.
- Power management settings – Windows may suspend the USB port to save power, and the device doesn’t wake properly.
- Faulty USB port or cable – a damaged port or cable can cause intermittent connections that trigger the error.
- Hardware failure – the device itself may be physically broken or overheating.
- Conflicting drivers – leftover drivers from a previous device or a generic driver conflict.
- BIOS/UEFI settings – legacy USB support or xHCI mode can affect device detection.
Before You Start: Basic Checks
- Restart your computer – this clears temporary glitches and re-enumerates all USB devices.
- Try a different USB port – especially a port directly on the motherboard (not a front-panel or hub).
- Try a different cable – for external drives and phones, a damaged cable is a common culprit.
- Test the device on another computer – if it also fails there, the device is likely faulty.
If the device works on another PC, the problem is with your computer’s software or ports. If it doesn’t work anywhere, the device may need repair or replacement.
Fix 1: Uninstall and Reinstall the Driver
This is the most effective fix for Code 43. It forces Windows to re-detect the device and install a fresh driver.
- Press Windows + X and select Device Manager.
- Expand the category that contains the problematic device (e.g., Universal Serial Bus controllers or Disk drives).
- Right-click the device with the yellow exclamation mark and select Uninstall device.
- In the confirmation dialog, check “Delete the driver software for this device” if the option appears, then click Uninstall.
- Restart your computer. Windows will automatically reinstall the driver on boot.
If the error persists, try the same steps but skip the “Delete driver software” checkbox—sometimes the generic driver works better than a specific one that’s corrupted.
Fix 2: Update the Driver Manually
If reinstalling doesn’t work, the installed driver may be outdated or incompatible. Update it manually:
- In Device Manager, right-click the device and select Update driver.
- Choose Search automatically for drivers. Windows will check online and install the best match.
- If that fails, go to the manufacturer’s website for your device (or motherboard, for internal USB controllers) and download the latest driver manually. Install it and restart.
For internal USB controllers (like Intel or AMD chipset drivers), updating the chipset driver from the motherboard manufacturer’s site can resolve Code 43 for multiple devices at once.
Fix 3: Disable USB Power Saving
Windows can turn off USB ports to save power, which sometimes causes devices to fail. Disable this for the affected device and for the USB root hub.
- Open Device Manager, right-click the device with Code 43, and select Properties.
- Go to the Power Management tab and uncheck “Allow the computer to turn off this device to save power.”
- Click OK.
- Repeat for every USB Root Hub under Universal Serial Bus controllers.
This is especially useful for external hard drives and webcams that disconnect randomly.
Fix 4: Run Hardware and Devices Troubleshooter
Windows includes a built-in troubleshooter that can automatically detect and fix common hardware issues.
- Open Settings (Windows + I) and go to System > Troubleshoot (or Update & Security > Troubleshoot on older versions).
- Select Other troubleshooters (or Additional troubleshooters).
- Click Hardware and Devices and then Run the troubleshooter.
- Follow the prompts and restart if asked.
This tool is limited but worth trying, as it may reset the USB controller or fix registry issues.
Fix 5: Check for Windows Updates
Sometimes a pending Windows update contains a driver fix. Go to Settings > Windows Update and click Check for updates. Install any available updates, especially driver updates under Optional updates, then restart.
Fix 6: Reset the USB Controller (Advanced)
If the above fail, you can reset the entire USB controller. This is safe but will temporarily disconnect all USB devices.
- In Device Manager, expand Universal Serial Bus controllers.
- Right-click the first item that says Host Controller (e.g., Intel(R) USB 3.0 eXtensible Host Controller) and select Uninstall device.
- Repeat for all Host Controller entries.
- Restart your computer. Windows will reinstall the controllers automatically.
This is more thorough than uninstalling a single device and can clear deeper driver conflicts.
Fix 7: Check BIOS/UEFI Settings
If the problem persists with multiple devices, the issue may be in the BIOS. Restart your PC and press the key shown on screen (usually Del, F2, or F10) to enter the BIOS/UEFI. Look for settings like:
- Legacy USB Support – enable it if disabled.
- XHCI Hand-off – try toggling it (enabled/disabled).
- USB Wake Support – enable if present.
Save changes and exit. Note that BIOS interfaces vary widely; consult your motherboard manual for exact names.
When the Device Is Physically Faulty
If none of the software fixes work, the device itself may be damaged. Try the device on a different computer one more time. If it still shows Code 43, the hardware has likely failed. For external drives, you may still be able to recover data using recovery software, but the device itself may need replacement. For internal components like a Wi-Fi card or GPU, ensure the card is properly seated in its slot and that the power connectors are secure.
Frequently Asked Questions
Can Code 43 be caused by a virus?
It’s unlikely. Code 43 is a hardware/driver error, not a typical symptom of malware. However, some malware can corrupt drivers, so a full antivirus scan is a reasonable precaution if the error appeared suddenly.
Does Code 43 mean my USB device is broken?
Not necessarily. It often means the driver is corrupted or the port is having power issues. Only after trying all software fixes and testing on another computer can you conclude the device is faulty.
Why does Code 43 appear after a Windows update?
Windows updates can replace a working driver with an incompatible version. Uninstalling the device and letting Windows reinstall the old driver (or manually installing the manufacturer’s driver) usually fixes it.
Can I fix Code 43 on a Mac?
Code 43 is a Windows-specific error. On a Mac, you might see “Device Not Recognized” or similar. The fixes are analogous: reset the USB port, restart, or reinstall drivers if you’re running Windows via Boot Camp.
Is there a way to fix Code 43 without restarting?
You can try uninstalling and reinstalling the driver without a restart by using “Scan for hardware changes” in Device Manager, but a restart is often necessary for the changes to take effect.
What if Code 43 appears on a USB hub?
Try plugging the device directly into the computer. If it works, the hub may be underpowered or faulty. If it still fails, the problem is with the device or the computer’s USB controller.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Fix Apps Not Downloading From Play Store
- Secure a Samsung Galaxy After a Zero-Day Disclosure
- What to Check Before Installing Linux Alongside Windows
- Fix OEM Activation Error 0xc004c060 in Windows 10
- Why Does My App Run One Query for the List and One per Item?
- Fix Google Chrome Has Stopped Working