USB tethering on Windows stops working for a variety of reasons, but most fixes are quick and do not require special tools. This guide walks you through the most common causes and solutions, from checking the cable to updating drivers, so you can get your internet connection back within minutes.
Why USB Tethering Fails on Windows
USB tethering shares your phone’s mobile data connection with your PC through a USB cable. Windows treats the tethered phone as a network adapter, so any issue with the cable, the phone’s settings, or the Windows network stack can break the connection. Common culprits include a faulty cable, the phone being set to “Charging only” mode, outdated or missing RNDIS drivers, and Windows power management turning off the adapter.
Step-by-Step Fixes to Try
- Check the cable and port. Use the cable that came with your phone or a known-good data cable. Some cables are charge-only and lack the data wires. Try a different USB port on your PC, preferably a USB 2.0 or 3.0 port directly on the motherboard rather than a hub.
- Enable USB tethering on your phone. On Android, go to Settings → Network & Internet → Hotspot & tethering → enable USB tethering. On iPhone, go to Settings → Personal Hotspot → enable “Allow Others to Join” and plug in the cable. If the option is grayed out, disable and re-enable it.
- Unlock your phone. Some phones disable tethering when the screen is locked. Keep the phone unlocked during the connection.
- Restart both devices. Reboot your phone and PC. This clears temporary glitches in the USB stack and network services.
- Check Windows network settings. Open Settings → Network & Internet → Status and look for an active Ethernet or USB connection. If you see an unidentified network, try disabling and re-enabling the adapter in Device Manager.
- Update or reinstall the RNDIS driver. Windows uses the Remote NDIS (RNDIS) driver for USB tethering. Open Device Manager (right-click Start → Device Manager), expand “Network adapters,” look for “Remote NDIS based Internet Sharing Device” or a device with a yellow warning. Right-click it, select “Update driver,” then “Search automatically.” If that fails, select “Uninstall device,” then scan for hardware changes.
- Disable power saving on the adapter. In Device Manager, right-click the RNDIS device → Properties → Power Management tab → uncheck “Allow the computer to turn off this device to save power.”
- Reset the network stack. Open Command Prompt as administrator and run:
netsh winsock resetandnetsh int ip reset. Then restart your PC.
What to Do If the Fixes Don’t Work
If you still have no connection, try tethering on another PC to confirm your phone’s tethering works. If it works on another PC, the issue is specific to your Windows setup. If it fails everywhere, the problem is likely with your phone, carrier plan, or the USB cable. Also check whether your mobile plan includes tethering; some carriers block it.
USB Tethering vs. Wi-Fi Hotspot
USB tethering is generally more stable and faster than Wi-Fi hotspot because it uses a wired connection with less interference. It also charges your phone while connected. The downside is that it ties your phone to the PC with a cable, and some phones may not support tethering over USB if the driver is missing. Wi-Fi hotspot is more convenient but drains the battery faster and can be slower in crowded areas.
Common Misconceptions
Many people think USB tethering uses a different data allowance than regular phone data. In most cases, it uses the same data plan, but some carriers have separate tethering limits. Check your plan details. Another misconception is that a damaged USB cable only affects charging; a damaged data wire will still charge but won’t transfer data, so the PC won’t see the phone as a network device.
Frequently Asked Questions
Why does my PC say “Unidentified network” when tethering?
This usually means the phone is connected but Windows can’t get an IP address. Try re-enabling USB tethering on the phone, restarting the PC, or running the network reset commands mentioned above. Also, make sure your phone has a working mobile data connection.
Can I use USB tethering on Windows 11?
Yes, USB tethering works on Windows 11 exactly as it does on Windows 10. The steps are the same. If you have issues, check that your phone’s driver is up to date and that the USB cable supports data transfer.
Why is my USB tethering slow?
Speed depends on your mobile signal, data plan speed, and the USB connection. USB 2.0 supports up to 480 Mbps, which is faster than most mobile connections, so the bottleneck is usually the cellular network. Try moving to an area with better signal or check if your plan has speed throttling after a data cap.
Do I need to install special software for USB tethering?
No. Windows has built-in RNDIS drivers for most Android phones and built-in support for iPhone tethering. If the driver is missing, Windows will prompt to install it automatically. You don’t need third-party software.
Can USB tethering damage my phone or PC?
No, USB tethering is safe. It uses the standard USB connection and doesn’t cause damage. However, using a low-quality cable can cause connection drops or slow speeds, so use a good quality cable.
Preventing Future USB Tethering Problems
To avoid recurring issues, keep your phone’s operating system and Windows updated. Use a high-quality USB cable that clearly supports data. When connecting, always unlock the phone and enable tethering after plugging in the cable. If you regularly tether, consider disabling power management on the RNDIS adapter as described above, and periodically reset the network stack if you notice intermittent drops.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- Gmail Notifications Not Working? Fixes That Work
- Fix Thumbnails Not Showing on Network Drives in Windows 11
- Stop Skype Auto-Start in Windows: 5 Fixes
- Madden 20 Crashes on PC: Solved?
- SQL Injection Prevention: Step-by-Step Guide
- Fix Windows PowerShell Popping Up