sodcalculator

10 Tech How-To

Fix Windows 10 Stuck at Resetting This PC

Guide 10-45336 · Updated · Step by step

If your Windows 10 PC is stuck on the “Resetting this PC” screen for more than a couple of hours, the reset process has likely hung and needs to be interrupted and restarted. The most reliable fix is to force a shutdown, boot into the Windows Recovery Environment, and run the reset again from there, or use a startup repair if the reset won’t complete.

Why the Reset Gets Stuck

Windows 10’s “Reset this PC” feature (found in Settings > Update & Security > Recovery) reinstalls the operating system while either keeping or removing your personal files. The process copies a fresh Windows image, backs up your old system, and then applies the new installation. It can take anywhere from 20 minutes to several hours depending on your drive speed, the amount of data, and whether you chose “Remove everything.”

When it appears frozen, the most common causes are:

  • Waiting on a slow or failing hard drive – a mechanical drive with bad sectors can stall the copy process indefinitely.
  • Interrupted system files – corrupted Windows components prevent the reset from proceeding.
  • Third-party antivirus or disk encryption – these can lock files the reset needs to modify.
  • Power or thermal issues – a laptop on battery that goes to sleep can pause the operation.
  • Windows Update pending – a partially installed update can conflict with the reset.

How Long Should You Wait Before Intervening?

There is no official time limit, but a reasonable rule is: if the progress ring has not moved for 2–3 hours, or the screen has been on for over 4 hours total, it is likely stuck. On a modern SSD, a reset should finish well under an hour. If you are on a very old spinning drive with lots of data, it could take longer, but a completely static screen for hours is a bad sign.

Before forcing a shutdown, check if the drive light is blinking or the fan is spinning up – that indicates activity. If the screen is completely static and the system is unresponsive to mouse or keyboard, proceed with the fix.

Force Shutdown and Boot to Recovery

To break out of the hang, you need to do a hard power cycle. Press and hold the physical power button for 10–15 seconds until the PC turns off. Wait a few seconds, then turn it back on.

  1. As soon as the PC restarts, begin pressing the F11 key repeatedly (or the manufacturer’s recovery key – often F8, F12, or Esc) until you see the blue “Choose an option” screen.
  2. If you miss it, let Windows try to boot. When it fails (because the reset was interrupted), it should automatically enter the recovery environment after a couple of attempts.
  3. Once in the blue menu, click Troubleshoot.

Run Startup Repair First

Before attempting another reset, try Startup Repair – it can fix the corrupted files that caused the hang in the first place.

  1. In the Troubleshoot menu, click Advanced options.
  2. Click Startup Repair.
  3. Select your user account and enter your password if prompted.
  4. Let it run. It may take 15–30 minutes. If it reports that it couldn’t fix anything, do not worry – you still have the reset option.

Reset Again From the Recovery Environment

If Startup Repair doesn’t help, go back to the Troubleshoot menu and choose Reset this PC again. This time you are running it from the recovery environment, which is more stable than from within a partially broken Windows session.

  1. Choose Keep my files if you want to preserve personal data, or Remove everything for a clean slate.
  2. If you choose “Remove everything,” you may be asked whether to clean the drive. “Just remove my files” is faster and usually sufficient.
  3. On the next screen, choose Local reinstall (or “Cloud download” if you have a stable internet connection – it downloads a fresh copy of Windows and often avoids corrupted local files).
  4. Wait for it to complete. If it hangs again, you may need to use a Windows 10 installation USB drive.

Use a Windows 10 Installation USB

If the reset still won’t complete, the most reliable method is to boot from a Windows 10 installation USB and perform a clean install. This bypasses the reset system entirely.

  1. On another PC, download the Windows 10 Media Creation Tool and create a USB drive (at least 8 GB).
  2. Insert the USB into the stuck PC and boot from it (press F12 or Esc during startup to choose the boot device).
  3. Select your language, then click Install now.
  4. When asked for a product key, you can skip it – Windows will activate automatically if the hardware was previously activated.
  5. Choose Custom: Install Windows only.
  6. Select the partition where Windows is installed (usually the largest one) and click Format, then Next. This erases everything, so back up any important files first if you can.

What to Do If You Need to Recover Files First

If you have irreplaceable files on the drive and didn’t back them up, do not format the drive yet. Instead, boot from the USB, choose Repair your computer instead of “Install now,” then go to Troubleshoot > Advanced options > Command Prompt. From there you can copy files to an external drive using command-line tools like copy or robocopy. If that seems too technical, remove the drive and connect it to another PC as a secondary drive to copy files normally.

Frequently Asked Questions

Will I lose my files if I force a shutdown during a reset?

Not necessarily. Forcing a shutdown interrupts the process but does not automatically delete your personal files. However, the system may be left in an inconsistent state, so you should boot into recovery and try Startup Repair or reset again with “Keep my files.” If the drive is damaged, there is a risk of data loss, but a hard shutdown alone does not erase data.

How long should I wait before giving up on the reset?

As a general guideline, wait at least 2–3 hours if the progress ring is moving or the drive light is active. If the screen is completely static for over an hour with no disk activity, it is stuck. There is no harm in waiting longer, but if you have important work, it is better to intervene sooner rather than later.

What does “Cloud download” do differently?

“Cloud download” fetches a fresh copy of Windows from Microsoft’s servers and uses it to reinstall the system, rather than using the potentially corrupted local installation files. It requires a stable internet connection and about 4 GB of data. It is often more successful when the local files are damaged.

Why does the reset keep failing even after I try again?

Repeated failures usually point to deeper issues: a failing hard drive, corrupted system partitions, or incompatible third-party software. A clean install from a USB drive bypasses all of these because it formats the drive and writes a new system. If the clean install also fails, the drive itself is likely faulty and should be tested with a tool like CrystalDiskInfo.

Can I reset Windows 10 from the lock screen?

Yes. On the lock screen, click the power icon, hold Shift and click Restart. This boots into the recovery environment where you can access the same Troubleshoot > Reset this PC option. This is useful if you cannot get into Settings normally.

Is there a way to avoid the reset getting stuck in the future?

Keep your system files healthy by running sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth periodically, ensure your drive has enough free space (at least 20% of its capacity), and avoid interrupting Windows updates. Also, regularly create a system image backup so you can restore without relying on the reset feature.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →