sodcalculator

10 Tech How-To

How to Check SMART Status on Mac

Guide 10-53695 · Updated · Step by step

To check SMART status on a Mac, open System Information (hold Option and click the Apple menu, then choose System Information), go to Hardware > SATA/SATA Express (or NVMe Express for newer SSDs), and look for the SMART Status line. It will read “Verified” if the drive is healthy or “Failing” if the drive has detected an imminent failure.

What Is SMART and Why It Matters

SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system built into hard drives and solid-state drives. It tracks a set of reliability indicators—like read/write errors, power-on hours, reallocated sectors, and temperature—and uses them to predict when a drive is likely to fail. The goal is to give you a warning before you lose data, not to prevent the failure itself.

On a Mac, the system reads this data and boils it down to a simple “Verified” or “Failing” status. A “Failing” status means the drive’s firmware has detected a serious problem, and you should back up immediately and plan to replace the drive. A “Verified” status means no critical thresholds have been crossed, but it does not guarantee the drive will never fail—sudden failures can still happen.

How to Check SMART Status on Your Mac

Checking is quick and requires no third-party tools. Here are the exact steps for both Intel and Apple Silicon Macs:

  1. Hold the Option key and click the Apple menu () in the top-left corner.
  2. Select System Information from the drop-down menu.
  3. In the left sidebar, under Hardware, click SATA/SATA Express for internal hard drives and SATA SSDs, or NVMe Express for PCIe/NVMe SSDs (most Macs from 2016 onward use NVMe).
  4. Look for the SMART Status row in the right pane. It will show “Verified” or “Failing”.

If you have an external drive connected via USB, it may appear under USB in System Information. However, not all external drives expose SMART data over USB—some enclosures do, some don’t. If you don’t see a SMART status for an external drive, try connecting it directly via Thunderbolt or a SATA-to-USB adapter that supports SMART passthrough.

Using Terminal for a Quick Check

If you prefer the command line, you can check SMART status for internal drives with a single command. Open Terminal (in /Applications/Utilities) and run:

diskutil info disk0 | grep SMART

Replace disk0 with the actual disk identifier (use diskutil list to see all disks). The output will show SMART Status: Verified or SMART Status: Failing. This works for internal SATA and NVMe drives on both Intel and Apple Silicon Macs.

For more detailed SMART attributes (like raw error counts), you’ll need a third-party utility such as smartmontools (available via Homebrew), but for a simple health check, the built-in tools are enough.

What “Verified” and “Failing” Actually Mean

Apple’s SMART status is a binary pass/fail based on thresholds set by the drive manufacturer. “Verified” means the drive’s firmware has not detected any attribute that crossed a critical threshold. It does not mean the drive is in perfect condition—it only means no immediate failure is predicted.

“Failing” means at least one attribute has crossed a critical threshold. This is a strong warning that the drive may fail soon, but it is not a guarantee. Some drives fail without ever showing a SMART warning, and some show “Failing” for months before actually dying. Regardless, treat “Failing” as a red alert: back up your data immediately and replace the drive as soon as possible.

It’s important to note that SMART status is not a health score—it’s a binary flag. A drive that is “Verified” could still have bad sectors or other issues that haven’t crossed the threshold. For a deeper look, you’d need to read the raw SMART attributes, which Apple does not expose in System Information.

Common Problems and Misconceptions

One common misconception is that SMART status is only for hard drives. In reality, SSDs also support SMART, and macOS reports it for internal NVMe SSDs as well. However, the metrics that matter for SSDs are different (e.g., wear leveling, spare blocks), and some third-party tools may not read them correctly.

Another issue is that external drives often show “Not Supported” or no SMART status at all. This is usually because the USB bridge chip doesn’t pass SMART commands through. It doesn’t mean the drive is unhealthy—it just means the Mac can’t read the data. If you want SMART monitoring for an external drive, connect it via a Thunderbolt enclosure or a SATA-to-USB adapter that explicitly supports SMART.

Some users also wonder if a failing SMART status can be reset. In most cases, no—the status is set by the drive’s firmware based on physical conditions. You can’t clear it with software. If you see “Failing,” the drive is genuinely in trouble, even if it still works for now.

Third-Party Tools for Detailed SMART Data

If you want more than a pass/fail, third-party tools can show the raw SMART attributes. Two popular options are:

  • smartmontools – a free, open-source command-line tool. Install with Homebrew (brew install smartmontools), then run smartctl -a disk0 to see all attributes.
  • DriveDx – a paid GUI app that provides a health score, temperature graphs, and detailed attribute tracking over time.

These tools are especially useful for monitoring a drive over time—you can watch for increasing error counts or reallocated sectors, which can be early warning signs even before the status flips to “Failing.”

What to Do If SMART Status Shows “Failing”

If your Mac reports a failing drive, act immediately:

  1. Back up your data now. Use Time Machine or another backup method to copy everything to an external drive or cloud service.
  2. Don’t ignore it. Even if the Mac still works, the drive could fail at any moment. Continuing to use it risks data loss.
  3. Replace the drive. For a desktop Mac, you can often swap the drive yourself. For laptops, it may be more involved—consider taking it to a professional if you’re not comfortable.
  4. If the drive is under warranty, contact the manufacturer. A failing SMART status is usually grounds for a warranty replacement.

Remember that SMART failure is a prediction, not a guarantee. Some drives fail without warning, so regular backups are always the best protection.

Frequently Asked Questions

Can I check SMART status on an external USB drive?

Sometimes. Many USB enclosures do not pass SMART commands, so the status may be missing or show “Not Supported.” Try a different enclosure or a direct SATA connection to get a reliable reading.

Does SMART status work on Apple Silicon Macs?

Yes. The System Information method works on both Intel and Apple Silicon Macs. For NVMe drives, look under NVMe Express instead of SATA.

What does “Verified” mean exactly?

It means the drive’s SMART attributes are all within normal thresholds. It is a good sign, but it doesn’t guarantee the drive won’t fail suddenly.

Can I reset a failing SMART status?

No. The status is set by the drive’s firmware based on physical measurements. You cannot clear it with software. If it says “Failing,” the drive is genuinely at risk.

Is SMART status enough to trust my drive?

SMART is a useful early warning system, but it is not foolproof. Always keep backups, regardless of SMART status.

Why don’t I see SMART status for my external drive?

Most likely the USB bridge doesn’t support SMART passthrough. Check the enclosure’s specifications or connect the drive via a different interface.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →