sodcalculator

10 Tech How-To

Enable Android Developer Mode & USB Debugging

Guide 10-55696 · Updated · Step by step

Developer Mode and USB debugging unlock hidden Android settings that let you test apps, capture logs, run ADB commands, and access deeper system tools. This guide walks you through enabling both on a stock Android phone or tablet, from opening the right settings screen to granting the final USB permission prompt.

What You’ll Need

  • An Android device (phone or tablet) running Android 6.0 or newer.
  • The device’s unlock pattern, PIN, or password (required to confirm the Developer options toggle).
  • A USB cable that supports data transfer (not charge-only).
  • Optional but helpful: a computer with ADB tools installed if you plan to use USB debugging for command-line tasks.

Step-by-Step

  1. Open the Settings app. You can find it in your app drawer or by swiping down and tapping the gear icon.
  2. Scroll to the bottom and tap About phone (or About device on some tablets). On Samsung devices, this is under About phone > Software information.
  3. Locate the Build number entry. On Samsung, it’s inside Software information. On stock Android, it’s directly in About phone.
  4. Tap Build number seven times. You’ll see a toast notification that says “You are now X steps away from being a developer” as you tap.
  5. After the 7th tap, you’ll see “You are now a developer!” or a similar confirmation. If you’re prompted for your PIN/password, enter it.
  6. Go back to the main Settings screen. You should now see Developer options in the list (usually near the bottom, above About phone).
  7. Tap Developer options to open it.
  8. Toggle the Developer options switch at the top to On (if it isn’t already).
  9. Scroll down to the Debugging section and toggle USB debugging to On.
  10. Read the warning dialog that appears — it explains that USB debugging allows a computer to read device data, install apps, and run commands. Tap OK to confirm.
  11. Connect your Android device to your computer using a USB cable. If this is your first time, a dialog will appear on your phone asking “Allow USB debugging?” with the computer’s RSA key fingerprint. Check Always allow from this computer if you trust the machine, then tap Allow.
  12. On your computer, run adb devices (if ADB is installed) to verify the device shows up as “device” (not “unauthorized” or “offline”). If you don’t have ADB, you can simply check that the phone shows a notification saying “USB debugging connected”.

Common Mistakes

  • Tapping the wrong item: Some users tap “Android version” or “Kernel version” instead of “Build number”. Only “Build number” triggers the developer unlock.
  • Not tapping enough times: It must be exactly seven taps. Six won’t do it, and eight is fine but unnecessary.
  • Forgetting to toggle the master switch: On some devices, Developer options appear but stay disabled until you flip the top switch to On.
  • Using a charge-only cable: Many cheap cables lack data lines. If the computer doesn’t detect your device, try a different cable.
  • Skipping the “Allow USB debugging” prompt: If you don’t tap Allow, the connection stays “unauthorized” and ADB won’t work.

Tips

  • Keep Developer options enabled only while you need them. When you’re done, you can toggle the master switch off without losing your settings.
  • If you’re using a company or school device, enabling Developer options may be blocked by policy. Don’t attempt to bypass it.
  • For wireless debugging on Android 11 and later, you can also enable Wireless debugging in the same menu, but you’ll still need to pair with a computer first.
  • If you ever need to revoke access to a computer, go to Developer options > Revoke USB debugging authorizations.
  • Some manufacturers (like Samsung) hide Developer options deeper. On Samsung, the path is Settings > About phone > Software information > Build number.

Troubleshooting

Developer options don’t appear after tapping Build number. Make sure you tapped the correct field and exactly seven times. If you’re on a Samsung device, check that you’re in Software information first. If it still doesn’t show, restart the device and try again.

USB debugging toggle is grayed out. This usually happens when a work profile or MDM policy restricts it. On personal devices, ensure you have no active screen time restrictions or parental controls that block it.

ADB says “unauthorized” or the Allow prompt doesn’t appear. Unplug the cable, then replug it. On the phone, pull down the notification shade and tap the USB connection notification — choose “File Transfer” or “PTP” mode instead of “Charge only”. Then look for the Allow prompt again.

Device shows as “offline” in ADB. This often happens after a driver issue. Try a different USB port, restart ADB with adb kill-server then adb start-server, and re-plug the device.

Computer doesn’t detect the device at all. Install or update the USB driver for your device (available from the manufacturer’s website). On Windows, check Device Manager for yellow exclamation marks.

Frequently Asked Questions

Is enabling Developer Mode safe?

Yes, for most users. It simply exposes advanced settings. The main risk is accidentally changing a setting that affects performance or privacy, so only change what you understand.

Will Developer Mode void my warranty?

No, not by itself. Unlocking the bootloader or rooting can void warranty, but merely enabling Developer options and USB debugging does not.

Why do I need to enter my PIN after tapping Build number?

This is a security measure to prevent unauthorized access when someone has your unlocked phone. It’s a one-time confirmation.

Can I use USB debugging without a computer?

Yes, some apps can use it via a local ADB connection, but the most common use is with a computer. You can also use wireless debugging on Android 11+.

How do I turn off Developer Mode completely?

Go to Settings > Apps (or Applications), find Settings, tap Storage, then Clear data. This resets all Settings including Developer options. Alternatively, toggle the master switch off — but that only disables it, it doesn’t hide the menu.

Why does my device forget USB debugging permissions after a reboot?

That’s expected behavior on some devices for security. You’ll need to re-authorize the computer each time you reboot if you didn’t check “Always allow” — and even then, some devices reset after a few days.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →