sodcalculator

10 Tech How-To

BitLocker on Mac: How to Read Encrypted Drives

Guide 10-53262 · Updated · Step by step

If you need to access files on a BitLocker-encrypted drive using a Mac, this guide shows you the two reliable methods: using the built-in macOS support for reading (but not writing) BitLocker drives, or using a third-party tool for full read/write access. You will need the BitLocker recovery key or the password set when the drive was encrypted, and macOS 10.13 High Sierra or later for the built-in method.

What You’ll Need

  • A Mac running macOS 10.13 High Sierra or newer (for the built-in read-only method).
  • The BitLocker password or the 48-digit recovery key for the encrypted drive.
  • The encrypted drive itself, connected via USB, Thunderbolt, or SATA adapter.
  • For write access: a third-party NTFS/BitLocker tool (e.g., Paragon, Microsoft’s own Mac tools, or open-source options).

Step-by-Step

  1. Connect the encrypted drive to your Mac using a compatible cable or adapter. If it’s an internal drive from a PC, you’ll need an external enclosure or a SATA-to-USB adapter.
  2. Wait for macOS to recognize the drive. It will appear in Finder as an unreadable volume, often named “BitLocker” or with a generic label. Do not format or initialize it if prompted.
  3. Open Finder and locate the drive in the sidebar under “Locations.” Click on it. macOS will show a dialog asking for the BitLocker password.
  4. Enter the BitLocker password you set when encrypting the drive. If you don’t have it, you’ll need the 48-digit recovery key. Click “Unlock” or “Mount.”
  5. If you have the recovery key instead of the password, look for an option like “Use recovery key” in the unlock dialog. Enter the key (often in groups of 6 digits).
  6. Once unlocked, the drive mounts and appears as a normal volume in Finder. You can now browse and copy files from it. Note: macOS’s built-in support is read-only — you cannot add, edit, or delete files on the drive.
  7. For read/write access, install a third-party tool like Paragon BitLocker for Mac (commercial), Microsoft’s own “Windows File Recovery” tools (limited), or open-source options like “M3 BitLocker Loader” or “iSumsoft BitLocker Reader.” Follow the tool’s installation instructions, then launch it and select the encrypted drive.
  8. In the third-party tool, you’ll typically see a list of BitLocker volumes. Select the drive, enter the password or recovery key, and click “Mount” or “Unlock.” The drive will appear in Finder with full read/write capability.
  9. When done, eject the drive properly by dragging it to the Trash or right-clicking and selecting “Eject.” This ensures all writes are flushed.

Common Mistakes

  • Using an older macOS version. BitLocker support was added in High Sierra (10.13). Earlier versions will not see the drive as encrypted.
  • Entering the wrong password or key. BitLocker is case-sensitive with passwords; recovery keys are numeric and must be entered exactly, including dashes if shown.
  • Assuming write access. The built-in macOS method is read-only. Trying to copy files to the drive will fail silently or with an error.
  • Formatting the drive when prompted. macOS may ask to initialize the drive; always click “Ignore” or “Cancel.” Formatting destroys the BitLocker header and makes data unrecoverable.
  • Unplugging without ejecting. This can corrupt the file system, especially if you used a third-party tool with write access.

Tips

  • If you only need to read a few files, the built-in method is free and sufficient. Copy files to your Mac first, then edit them locally.
  • For frequent access or write operations, invest in a reputable third-party tool. Trial versions often allow reading, but writing may require a license.
  • Keep your BitLocker recovery key in a safe place (e.g., a password manager or printed copy). It is the only way to unlock the drive if you forget the password.
  • If the drive is from an old PC and you no longer have access to Windows, you can still use the recovery key on your Mac.
  • For large drives, the initial unlock may take a few seconds. Be patient; do not disconnect during this time.

Troubleshooting

  • Drive not showing up at all: Check the cable and port. Try a different USB port or cable. If it’s a desktop drive, ensure it has external power. In Disk Utility (Applications > Utilities), see if the drive appears under “External” — if it does but is grayed out, it’s likely BitLocker-encrypted.
  • Unlock dialog says “wrong password”: Double-check Caps Lock and keyboard layout. If you have the recovery key, use that instead. If both fail, the password may have been changed after encryption; only the recovery key will work.
  • Drive mounts but is empty: This is rare but can happen if the drive was encrypted with a different version of BitLocker. Try the third-party tool, which may support more variants.
  • Third-party tool doesn’t see the drive: Ensure the tool is up to date and supports your macOS version. Some tools require you to grant permissions in System Settings > Privacy & Security > Full Disk Access.
  • Can’t copy files (permission errors): Even with read-only access, some files may be locked by macOS’s security. Try copying to a folder on your Mac, not directly to the drive.
  • Drive becomes read-only after using a third-party tool: Some tools mount as read-only by default. Check the tool’s settings for a “read/write” or “mount as writable” option.

Frequently Asked Questions

Can I write to a BitLocker drive on Mac without third-party software?

No. macOS’s built-in support is read-only. To write, you need a third-party tool like Paragon or M3 BitLocker Loader.

Does this work with BitLocker To Go (USB drives)?

Yes, the same methods work for USB flash drives and external hard drives encrypted with BitLocker To Go.

What if I forgot both the password and the recovery key?

There is no way to recover the data. BitLocker encryption is designed to be impossible to bypass without the password or key.

Is it safe to use third-party tools?

Generally yes, if you download from the official vendor. Be cautious of free tools from unknown sources, as they may contain malware. Always check reviews and use reputable software.

Will this work on Apple Silicon Macs (M1/M2/M3)?

Yes, the built-in method works on both Intel and Apple Silicon Macs. Third-party tools should also support both, but verify compatibility before purchasing.

Can I access the BitLocker drive from macOS Recovery or Internet Recovery?

No, the built-in BitLocker support is only available in the full macOS operating system, not in the recovery environment.

Related

General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.

More in this bed

The whole Tech How-To bed →