StandBy mode turns your iPhone into a bedside clock, photo frame, and glanceable info hub while it charges. You can customize the widgets that appear on the left and right sides of the screen, showing everything from the weather to your calendar. This guide walks you through adding, removing, and rearranging those widgets, plus what to do when things don’t behave.
What You’ll Need
- An iPhone running iOS 17 or later (StandBy is a system feature, not an app).
- A charging cable or wireless charger – StandBy only activates while the phone is charging.
- For the full experience, a charger that holds the phone in landscape orientation (like a MagSafe stand), though any charger works if you prop the phone up manually.
Step-by-Step
- Enter StandBy mode. Plug your iPhone into power and rotate it to landscape orientation. If you’re using a MagSafe stand, it will automatically snap into StandBy. On a flat charger, you may need to prop the phone up at an angle. The screen should go dark and show the clock.
- Wake the screen. Tap the screen once to wake it from the dimmed standby state. You’ll see the default layout: a clock on the left and a widget stack on the right (or vice versa, depending on your previous setup).
- Switch to edit mode. Press and hold on any widget or on the empty area of the widget column. The widgets will start to jiggle, and a blue + button will appear in the top-left corner of the widget area.
- Add a widget. Tap the + button. A widget gallery will slide up from the bottom. Scroll through the list or use the search bar to find an app. Tap an app to see its available widget sizes (small, medium, large). Swipe left/right to preview sizes, then tap Add Widget to place it in the stack.
- Remove a widget. While in edit mode (widgets jiggling), tap the − (minus) button in the top-left corner of the widget you want to remove. A confirmation prompt appears – tap Remove. The widget disappears immediately.
- Rearrange widgets. In edit mode, drag any widget up or down by its handle (the three horizontal lines on the right side of the widget) to reorder the stack. The topmost widget is the one you see by default.
- Exit edit mode. Tap the Done button in the top-right corner, or press the side button. Your changes are saved automatically.
- Switch between widget stacks. After exiting edit mode, swipe up or down on the widget column to cycle through the widgets you’ve added. This is how you view them without editing.
- Add a new stack (optional). If you want a completely separate set of widgets on the other side of the clock, press and hold on that side’s empty area, then tap the + to create a new stack. You can have up to two stacks – one on each side of the clock.
Common Mistakes
- Not in landscape. StandBy only works when the phone is sideways. If you’re holding it upright, you won’t see the widget editing interface.
- Phone not charging. StandBy is disabled when the phone isn’t plugged in. Double-check that the charging cable is firmly connected and the phone actually shows the charging icon.
- Tapping instead of holding. A quick tap just wakes the screen. You must press and hold for about a second to enter edit mode.
- Editing the wrong side. The clock side is not editable – only the widget side(s) are. If you hold on the clock, nothing happens.
- Forgetting to scroll. The widget gallery is scrollable. If you don’t see an app, swipe up in the gallery to see more.
Tips
- Use Smart Rotate. In StandBy settings (Settings > StandBy), enable Smart Rotate – it automatically switches between your widget stacks based on the phone’s orientation (e.g., portrait vs landscape). This lets you have different widgets for different times of day.
- Group related widgets. Put your calendar, reminders, and weather in one stack, and your smart home controls in another. Swipe up/down to quickly check each.
- Take advantage of interactive widgets. Many widgets (like Music, Home, or Reminders) are tappable – you can play/pause, toggle lights, or check off tasks directly from StandBy without unlocking your phone.
- Dim the screen at night. StandBy automatically dims to red at night in low light. You can turn this off in Settings > StandBy > Night Mode if you prefer a brighter display.
- Use the full-screen clock. Swipe up on the clock to see a full-screen digital clock, then swipe again to see an analog one. This is separate from the widget stacks.
Troubleshooting
- StandBy doesn’t activate. Make sure your iPhone is running iOS 17 or later (Settings > General > About). Also confirm that StandBy is enabled in Settings > StandBy (the toggle should be green). If you’re using a non-MagSafe charger, you may need to physically prop the phone at an angle – StandBy won’t trigger if it’s lying flat and the screen is off.
- Widgets don’t appear. If you’ve added widgets but they’re not showing, try exiting StandBy (unplug the phone) and re-entering. Also check that the widget’s app is installed and not offloaded (Settings > General > iPhone Storage).
- Can’t enter edit mode. If long-pressing does nothing, make sure you’re not in the middle of an animation. Wait a second and try again. If it still fails, restart your iPhone (press and hold side + volume down, then slide to power off).
- Widgets keep resetting. If your stacks revert to default, it’s likely because you’re viewing a different orientation than the one you edited. StandBy saves separate stacks for portrait and landscape (if Smart Rotate is on). Edit the stack in the orientation you want to use.
- Some apps don’t offer widgets. Not every app has a StandBy widget. If you can’t find an app in the gallery, it simply doesn’t support widgets yet. You can check the App Store for updates, but there’s no workaround.
Frequently Asked Questions
Can I add widgets to the left side of the clock?
Yes, you can have two stacks – one on each side. Press and hold on the side you want to edit, then tap the + button to add a new stack there. The clock stays in the center.
Why do my widgets disappear when I unplug my phone?
StandBy is only active while charging. When you unplug, the widgets are hidden. They’ll reappear automatically the next time you charge and enter StandBy.
Can I use StandBy widgets without a MagSafe charger?
Absolutely. Any charger works – just make sure the phone is in landscape orientation and propped up at an angle. StandBy will activate as long as the screen is on and the phone is charging.
How do I delete an entire widget stack?
There’s no direct “delete stack” button. To remove a stack, remove all widgets from it one by one using the − button. When the last widget is removed, the stack disappears.
Will adding widgets drain my battery faster?
While in StandBy, the screen is dimmed and the phone is charging, so battery drain is minimal. Widgets that update frequently (like weather) may cause slightly more power use, but it’s negligible during charging.
Can I customize the clock style in StandBy?
Yes. Swipe up on the clock to cycle through different styles: digital, analog, world clock, and solar. You can also change the color by pressing and holding on the clock, then selecting a color from the bottom of the screen.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this bed
- How to Factory Reset iPad If You Forgot Password
- Ubuntu in Windows Store: Which Editions Work?
- Secure Guest Account on Windows 11: Step-by-Step
- Stop Outlook From Changing Hyperlink Font
- Hiberfil.sys: What It Is & How to Delete It
- How to Make a Mask on Snapchat: Step-by-Step